Reddit mentions of Krylon K05130107 ColorMaster Acrylic Crystal Clear, Gloss, Clear, 11 oz.

I did it on my old snowboard that was not gonna last the whole season.
-Hand Sanded the board with 120-160 grit paper. (my board has originally more of a matte paint on it then the typical glossy coats).
-I cleaned the top of the board throughly.
-I taped with painters tape all around the sides, I cut Q-Tips in half and put them in the binding screw holes to make sure that paint didn't go in.
-Spray painted with black matte with 2 layers.
-I made stencils out of foam paper, I spray with whatever other colors for the stencils
http://www.michaels.com/creatology-value-pack-foam-sheets/M10287634.html .

-After significant drying, I spray painted with a satin clear coat for protection:
https://www.amazon.com/Krylon-Colormaster-Crystal-Clear-Acrylic/dp/B0009X8LZ4/ref=sr_1_1?s=hi&ie=UTF8&qid=1526492540&sr=1-1&keywords=krylon+clear+coat .

Here is my result:
https://photos.app.goo.gl/hZXQJhVugNizjNel1 .

I would have used perhaps a more glossy finish since the snow stuck on the top of my board more than before with the factory paint. It's not something I would do a newer board personally.

I spray with Krylon clear, let set for 24 hours then finish with testors dull coat.
https://www.amazon.com/gp/product/B0009X8LZ4/ref=oh_aui_search_detailpage?ie=UTF8&psc=1

https://www.amazon.com/gp/product/B009FF6DN4/ref=oh_aui_search_detailpage?ie=UTF8&psc=1

I don't really know that stuff either. This is what I used.

https://www.amazon.com/gp/aw/d/B0009X8LZ4/ref=sxts1?ie=UTF8&qid=1485391722&sr=1&pi=AC_SX236_SY340_FMwebp_QL65

I bought this necklace from COS a while back and the gold finish is rubbing off the chain and it's getting a metallic smell. Does anyone have a great solution for this? After about 30 seconds of research I ordered this Krylon spray but I was wondering if anyone knows of a better solution before I spray it down.

https://www.amazon.com/gp/product/B0009X8LZ4/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1

Works well on cardboard and plastic, in my experience!

Okay so would this top coat work? or maybe this one An extra question. Would I place stickers before gloss coat or after gloss and before matte?

It may come down to a difference in printers. Mine dries really quickly and isn't prone to smearing because I have a transparency print setting built in. Yours might use more ink or a different type of ink or something. If the ink continues to be annoying, I highly recommend spraying your sheets with something like this before you put them on the cards.

http://www.amazon.com/Krylon-Colormaster-Crystal-Clear-Acrylic/dp/B0009X8LZ4/ref=sr_1_3?ie=UTF8&qid=1457397610&sr=8-3&keywords=clear+coat+spray+paint+plastic

That's what I used, it seems to be holding up pretty well too.

https://www.amazon.com/Krylon-Colormaster-Crystal-Clear-Acrylic/dp/B0009X8LZ4

That is what is currently being used. I don't see how this helps all that much to be honest. They have been doing this for years though.

We also handling the boards to much imo. We get them from our supplier then program them, test them, spray them then mount them. Ideally it'd be nice to find a company that could send them 100% complete to us. If you have any recommendations that would also be appreciated.

I did my research and found that someone suggested using this http://www.amazon.com/Krylon-Colormaster-Crystal-Clear-Acrylic/dp/B0009X8LZ4?th=1&psc=1

But im still hesitant because I don't really wanna ruin the IDs. I'm only hesitant because it'll take me a while to earn up that much money for another.

So basically this:http://www.amazon.com/Krylon-Colormaster-Crystal-Clear-Acrylic/dp/B0009X8LZ4/ref=sr_1_1?ie=UTF8&qid=1458077276&sr=8-1&keywords=gloss+spray+paint

And this: http://www.amazon.com/gp/product/B00CSXMDZM?psc=1&redirect=true&ref_=ox_sc_act_title_1&smid=ATVPDKIKX0DER