Reddit mentions of Neewer Shutter Release Timer Remote Control Cord Compatible with Canon EOS 550D/Rebel T2i, 450D/Xsi, 400D/Xti, 350D/XT, 300D 60D 600D 500D 1100D 1000D 10D 20D 30D 40D 50D

There's cheapo ones that have intervalometers and bulb timers too. Ex: https://www.amazon.com/Neewer-Shutter-Release-Remote-Control/dp/B0081EC08M

What camera? You don't need one at all if you can install magic lantern, it's built into the software (what I use) - otherwise the cheap Amazon knockoffs (http://www.amazon.com/Shutter-Release-Timer-Remote-Control/dp/B0081EC08M/ref=sr_1_5?s=electronics&ie=UTF8&qid=1394018085&sr=1-5&keywords=canon+cable+release) work as well as the canon $100 ones (what I used before ML).

edit: ah, i see your have a nikon. maybe this one: http://www.amazon.com/GTMax-Digital-Shutter-Release-Control/dp/B00463ERCY/

you can buy an intervalometer from amazon for $15 and use your t6i for time-lapse shots. they both share the same 24mp sensor, so image quality will be identical. If it was me, i would get the t6i, because of the higher focus points, but that's because I only take stills and 9 point is too low when you are taking stills.

Mine is no longer available but this one is similar and quotes up to 100 hr exposure right in the specs

The lens is reviewed here, and I used a el cheapo intervalometer that works perfectly.

Can you connect some kind of remote to the camera? The connector looks something like a headphone jack, but it would probably be easiest to just search for name_of_camera remote on amazon - it should look similar to this and would allow you to expose however long you wish, for a set length or in an interval.

Although just having a longer exposure isn't actually as helpful as you might think - the trails just start overlapping (this is 92s) and at some point the pictures just kind of all look the same - having control of exactly when the exposure starts and ends is very nice.

Hey!

I got a little issue regarding my DSLR camera (Canon 4000D) (I know it doesn´t have a good reputation, but I just got started in photography and didn´t wanna spend too much money on my first camera)... So, the problem is, that I recently bought an intervalometer for my Canon 4000D to get started in taking time-lapses, but soon after I bought it, I realized that there is no port at my camera to connect the intervalometer with it. Also, the adapter cables I got from the package with the intervalometer do not fit.

The only 2 ports that my camera has are HDMI and (I think) mini USB b type. Do you know if there is any possible way to connect the regular jack connection from the intervalometer with my camera? Or connect an intervalometer with the camera in general.

This is the intervalometer I got:

https://www.amazon.com/Neewer-Shutter-Release-Remote-Control/dp/B0081EC08M/ref=sr_1_4?crid=34LO8ERMFRZWR&keywords=intervalometer+canon&qid=1555961227&s=gateway&sprefix=intervalometer+%2Caps%2C229&sr=8-4

I just can´t find any solution online and really wanna start doing time-lapses...

The general concept is really easy. Maybe it's just the times I've tried it, but I would have expected the moon to track a little more.

Most cameras should be able to let you do up to 30s of exposure. Someone can correct me if I'm wrong, but Canons don't have the functionality to go beyond that, while Nikon does (don't ask me about any others). Because it has a million different names, let's just say that if you own a Canon, you may have to get a doohickey to allow for > 30 seconds.

To start, I wouldn't even worry about filters. Just try out different times and aperture settings. If you want lights to have a more starburst type effect, you need to make sure you shutter smaller (larger f/#) and go for a longer time.

Here are some of my others:

https://i.imgur.com/wzt6fit.jpg

https://i.imgur.com/o7wpcxj.jpg

https://i.imgur.com/Y1bw0SF.jpg

I have* a Neewer remote that does pretty close to what you want, and I use it to do this.
It's a corded remote, so set the delay to however long it'll take you to get in the shot.
Leave the bulb alone - instead set exposure on your camera.
Leave interval at 1 (as low as it goes), and it'll take a picture every one second. Not quite burst, but close.
Set the number to however many photos you want to take.
Leave the sound on, and if you have good ears, you'll hear when it's done from where you are.

• I don't actually have a Neewer, I have some even cheaper knockoff version. I think they all come from the same factory anyway. Mine was $15. Just find what kind of remote plugin you need and search Amazon for that.

Oh man, that's a nice camera! You're going to have tons of fun with that.

You do probably want to use the bulb setting, although you don't have to. I think the a6000 will do up to a 30" exposure without a remote. I use this timer because it lets you totally customize and automate your picture-taking. For example, you can do a nighttime time-lapse movie by taking, say, a 30 second exposure every 2 minutes for 6 hours, and you can program that all into the remote so that it will work while you sleep. Definitely a worthwhile investment if you want to get into any kind of photography.

If you have a mac and a camera, just plug it in and have the Image Capture utility auto shoot every x number of seconds.

If not, either get a camera that has this ability built in, or get a timelapse specific attachment for your camera such as this one.

Once you have all the shots taken (I recommend 1 shot every 1 or 2 minutes) put them into a video editor (imovie works well but others should be fine) and set the frames to say .1 seconds each. Export that resulting series of frames as a movie and voila!

I made this timelapse using this technique.

OR

Get a smartphone timelapse app and just set your phone up to shoot the shots. Downside to this is that you wont have a phone for the duration of the print :( but it'll take care of almost everything else including exporting a video for you :)