#25,374 in Tools & Home Improvement
Use arrows to jump to the previous/next product
Reddit mentions of Nicelux CCT Tunable LED Strip Connector 10mm 3 Pin (5PCS) With 9.8 Feet 20 AWG LED Extension Wire, DIY Both Strip to Power and board to board Jumper, Non-waterproof And SILICON WATERPROOF Compatible
Sentiment score: 0
Reddit mentions: 2
We found 2 Reddit mentions of Nicelux CCT Tunable LED Strip Connector 10mm 3 Pin (5PCS) With 9.8 Feet 20 AWG LED Extension Wire, DIY Both Strip to Power and board to board Jumper, Non-waterproof And SILICON WATERPROOF Compatible. Here are the top ones.
or
NOT for PU / Epoxy cover waterproof--With 9.8 Feet 3 conductor flat wire ready, you can DIY both strip-to-strip-bridge(jumper) and strip-to-power-lead connector wire that is up to 3 meter long, no stripping or soldering neededJust place strip light or wire above connector's pin, then press cap down by pliers, connection will be done well. Easily connect your dual color led strip to dimmer or controllerPowerful with as much as total 5A current supported, allow you to connect longer LED strip by one connector,reducing cost and connection workAt strip end the pin will go through PCB from strip light back, at wire end the blade will pierce the insulation, so connector can grip strip light and wire tightly,never worry them getting out of connector. Even workable to strip light with 3M VHB red foam adhesive tapeApplicable for non-waterproof dimmable(cct) SMD3528 /3014 /2835 /2016 strip light in different LED density ranging 30~120 LEDs per meter
Specs:
| Color | 10mm 3 Pin for Ip20 |
| Size | 5 of 10 mm Connectors + 9.8 Feet 3C Wire |
Not only is the DIY solution a HELL of a lot cheaper, you can also cut these strips and extend them. Not to mention, hue strips do not have individually addresable LEDs, which means you can't do fancy effects like this: https://www.youtube.com/watch?v=9i4l5_knq8Y , or a more "home automation" style example: https://www.youtube.com/watch?v=2j3UyrBjB4g .
Keep in mind that if your cutting them and want to reuse them, you will have to posses some soldering skills, or purchase these https://www.amazon.com/Nicelux-Connector-Extension-Conductor-Non-waterproof/dp/B071VN9D6N
WS2812B strips can be hooked up to a Lighting Node Pro or Commander Pro; the Corsair strips are WS2812B strips with magnets on the back. I used Dupont female to female wires to go from the JST connector on the strip to the Commander Pro's LED channel connector.
I believe I used this strip on Amazon. iCUE will only work with 60 LEDs on a channel, so one meter with 60 LEDs worked out as a more dense solution than the ones Corsair makes. If you are less inclined to DIY the cabling, these cables on eBay would do the same thing.
I also bought this to be able to cut the LED strip to length and keep the strip on the same LED channel by extending the wiring. Clamp the connectors down well to the LED strip and the wires and they work great.