Reddit mentions: The best track lighting connectors

We found 246 Reddit comments discussing the best track lighting connectors. We ran sentiment analysis on each of these comments to determine how redditors feel about different products. We found 98 products and ranked them based on the amount of positive reactions they received. Here are the top 20.

🎓 Reddit experts on track lighting connectors

The comments and opinions expressed on this page are written exclusively by redditors. To provide you with the most relevant data, we sourced opinions from the most knowledgeable Reddit users based the total number of upvotes and downvotes received across comments on subreddits where track lighting connectors are discussed. For your reference and for the sake of transparency, here are the specialists whose opinions mattered the most in our ranking.
Total score: 60
Number of comments: 5
Relevant subreddits: 5
Total score: 18
Number of comments: 4
Relevant subreddits: 1
Total score: 13
Number of comments: 4
Relevant subreddits: 1
Total score: 10
Number of comments: 4
Relevant subreddits: 1
Total score: 10
Number of comments: 4
Relevant subreddits: 1
Total score: 8
Number of comments: 5
Relevant subreddits: 2
Total score: 6
Number of comments: 6
Relevant subreddits: 2
Total score: 5
Number of comments: 4
Relevant subreddits: 2
Total score: 4
Number of comments: 4
Relevant subreddits: 1
Total score: 4
Number of comments: 4
Relevant subreddits: 1

idea-bulb Interested in what Redditors like? Check out our Shuffle feature

Shuffle: random products popular on Reddit

Top Reddit comments about Track Lighting Connectors:

u/kiwiandapple · 1 pointr/buildapcforme
> I agree eating alone is probably the worst part of solo travel but from my experience, local people are quite friendly. There has been many occasions where they invited me to eat with them even with the language barrier. It was quite enjoyable. Maybe I just got lucky with people.

Ow yes absolutely, I've had a couple occasions where I was invited or simply joined a table and had a great chat. I even made some friendships this way, saw one of them back last year too.

> LOL. My GF will be very happy to see that you've been working hard on her section of the room. Those options do create more space, she'll probably like it. Many thanks.

Hah, no problem! I like to help out as best as I can. I really get joy out of 'designing' as well, so this was fun. Let me know what she thinks as well.

> I'm definitely going to add RGB and Kraken x62 and NZXT Vue+ lol. Going to go all out~

Will do this for you! I don't recommend the NZXT Hue+, instead I highly recommend to just use on-board RGB headers!
^(hilarious video, but it shows you how to set it up)
This allows you to sync other RGB parts together if the products allow for it, but the main reason is that you don't need a box inside the case and a controller. You simply use software to control the RGBs.

> Yeah I'm going to wait out on the monitor. i'm thinking either the ROG or ASUS or ACER 34+"

I think it's too much money personally. I mean.. my lasts years holiday was about equal the price of those two monitors. And I had to save a good bit to get this together. If you can justify it, I won't stop you. But I don't recommend it highly.

> The curved monitor I'm still debating. I heard photo editing is hard as well but I love the gimmick. I would never buy a curved TV so why not a curved monitor. Haha! + I heard it is decent for gaming?

I've got experience with a small sample of curved monitors, both TVs and gaming monitors I had a bit of time with. The curved TV was just.. weird and didn't work at all for me. I adjusted my distance from the TV many times to find a 'comfortable' viewing spot. The main problem I had was when I was not right in the centre, it just really makes it a bit weird. I mean, you probably get used to it, but I would not cash out on this at all personally.

> The curved monitor I'm still debating. I heard photo editing is hard as well but I love the gimmick. I would never buy a curved TV so why not a curved monitor. Haha! + I heard it is decent for gaming?

Do what you want, there are a lot of curved 3440x1440 displays. I will not stop you.
I personally love Dell and would really like that monitor.. If it wasn't curved. xD

It's something I just don't find useful. It does probably helps a little bit depending on your eyes field of view. But I currently use a 16:9 2560x1440p monitor and when I look at the left now (I am typing here), I can still see the right side just fine where the extra couple inches would be when I upgrade to a 3440x1440p display.

It is indeed not great for photo editing especially. I have no personal experience with this, but I can really imagine that it's not going to be helpful in the slightest. Depending on how serious you're into editing I suppose..

For games, it depends again on what games I think. The demo that I saw had Rise of the Tomb raider running which absolutely looked fenominal. But the curves didn't really add much for me personally.

---

Please ask anything that you want to know. This would be extremely overkill for you, but your girlfriend will love it. If you get the exact same system.

Here is my list of explanation videos and guides to help you understand what you're getting yourself into! Not sure if you saw this one already or not. I know it is a big list, but you don't have to watch everything, just what you want more information on. If you get any questions while watching those videos, ask ask ask!

Here is what I would recommend.

PCPartPicker part list / Price breakdown by merchant

Type|Item|Price
----|:----|:----
CPU | AMD - Ryzen 7 1700X 3.4GHz 8-Core Processor | $347.76 @ Amazon
CPU Cooler | NZXT - Kraken X62 Rev 2 98.2 CFM Liquid CPU Cooler | $159.99 @ B&H
Motherboard | MSI - B350 TOMAHAWK ARCTIC ATX AM4 Motherboard | $119.99 @ Amazon
Memory | G.Skill - Trident Z RGB 16GB (2 x 8GB) DDR4-3000 Memory | $154.99 @ Newegg
Storage | Samsung - 960 EVO 500GB M.2-2280 Solid State Drive | $219.99 @ B&H
Storage | Seagate - Barracuda 2TB 3.5" 7200RPM Internal Hard Drive | $66.99 @ Amazon
Video Card | Asus - GeForce GTX 1080 Ti 11GB STRIX GAMING Video Card | $739.99 @ Newegg
Case | NZXT - S340 Elite (White) ATX Mid Tower Case | $99.99 @ B&H
Power Supply | EVGA - SuperNOVA G2 650W 80+ Gold Certified Fully-Modular ATX Power Supply | $85.42 @ Amazon
Monitor | LG - 34UM88C-P 34.0" 3440x1440 60Hz Monitor | $697.00 @ Adorama
RGB | ESUMIC® LED Cable Connector Extension Cable Wire 4 Pin Female to Female For SMD 5050 3528 RGB LED Strip Light 30cm Black 10 Pack | $9 @ Amazon
RGB | CableMod WideBeam Magnetic LED Strip RGB - 30cm / 15 LEDs | $18.99 @ Amazon
RGB | CableMod WideBeam Magnetic LED Strip RGB - 30cm / 15 LEDs | $18.99 @ Amazon
RGB | TronicsPros 4 Pin LED Strip Connector RGB Extension Cable LED Splitter for SMD 5050 3528 RGB LED Strip Lights | $5.00 @ Amazon
Cables| CableMod Basic White kit - EVGA (incl. shipping)| $70.00 @ CableMod
| Prices include shipping, taxes and discounts |
| Total | $2814.09
| Generated by Kiwiandapple |

##I am not kidding, you can ask anything! Aside from my pin code..
u/ixos · 2 pointsr/homeautomation

Ok, sorry for the delay in getting back to you. Home improvement tasks have priority over home automation tinkering, but I have a few comments on these..

I got the wifi bridge and the LED controller w/ LED strips, and a bulb to try out. I didn't get a remote, and I'm kind of wishing that I had, because the ios app ain't all that useful - I can only get the LED strips to enroll in group #1 with the app. I plan to try later today using the vera MilightRGBW plugin (which has worked pretty well in the limited testing I've done.) I want it in its own group as the bulbs are in the nursery we're setting up.

One of the biggest shortcomings I see with this system is that you can't address the bulbs individually. They're all grouped up. One bulb can be in up to 4 different groups, and you only get 4 groups per controller or remote. Luckily, the wifi controllers are pretty cheap and it wouldn't be too much more to get another controller and expand out to 8 groups. That of course adds another app or remote, but I plan to do it via the MilightRGBW vera plugin.

The plug-in is fairly straight forward. You install the plug-in, it creates a device. You tell the device the ip of the controller and the group you want that vera-device-id to be in charge of. So, to fully utilize each controller you end up creating 4 vera devices (through the plug-in details page on the apps tab), and giving them the ip and group #1-4. In the plug-in, you can specify the color hue, brightness, disco mode & rate, etc, then hit sync and it sends the command to the bulb/group. I'll likely end up with another controller to take care of a few areas and have 8 of these app devices lingering on my vera devices panel (but I'll likely make up for them by making my lamp dimmer units obsolete). The plug-in also has some pre-coded buttons for Blue, Cyan, Green, Yellow, Red, and Magenta colors.

I haven't gotten too far into the lua programming aspect with these yet, but the plug-in lays out a series of commands to interact with the controller settings in the same manner as I described above, then you fire the sync command and make it all happen, allowing for some dynamic aspect to all of this. In looking at it, you can also set the ramp time for dimmers and some other things when you get to that point.

If you buy the LED strip controller, make sure to get some connector wires. It took me a bit to figure out how to wire them up, RGBW ends up being RGB-Yellow on the wiring schematic, and the arrow on the connector is for the black wire to match up with the strip's black wire. The connectors came with individual pre-stripped wires, but they were only a few mm long, so I stripped them back a bit more.

I spent about $100 on amazon for the LED controller, LED strips, connectors, RGBW bulb, and the wifi box (and something else, I think?). Overall, it's a cheaper solution than the HUE bulbs (which I was really interested in until they closed their system recently), and I feel that the value is definitely there for what I want it to do. The RGBW bulb is bright (too bright? It hurt my eyes at max), and has a good range of colors.

A few links..
The bulb I got: http://www.amazon.com/LEDENET-AC86-265V-Dimmable-Change-Compatible/dp/B00MNJSDLO/

The LED strip controller
http://www.amazon.com/LEDENET%C2%AE-Wireless-Controller-Changing-Brightness/dp/B00MGTVOSA/

Though I feel like this might be overkill as it appears to be another 4 zone controller, which might explain the problems I had with it. I might need to get a remote for this one?

LED strip connectors: http://www.amazon.com/LEDENET%C2%AE-Connector-Cable-Flexible-5-pack/dp/B00ML3Q2ME/

Wifi box: http://www.amazon.com/Wireless-Controller-Automation-Android-Lighting/dp/B014HTMLA6/

u/kernelwedge · 1 pointr/ZeroMotorcycles

Here is the BOM:
Got these because they were black PCB, don't like the way it was waterproofed but actually worked pretty well probably more robust than the coated ones.
IKSACE WS2811 1903 DC12V 5M 300LEDs 60LEDs/M Addressable Programmable Dream Color LED Digital Strip Pixel Strings 5050 RGB Flexible Colorful Rope LED Strip 16.4ft Black PCB https://www.amazon.com/dp/B06ZZ7T7X5/ref=cm_sw_r_other_apa_i_-iT1DbP3R271X

This was the controller I used (I'm sure you can find them without the LEDs, it's Bluetooth which isn't as common as you might think)
KORJO Dream Color LED Strip Lights, 32.8ft/10M Bluetooth LED Chasing Light with APP, Waterproof 12V 300 LEDs 5050 RGB Color Changing Rope Light Kit, Flexible Led Strip Lighting for Home Kitchen https://www.amazon.com/dp/B07L5C8GQM/ref=cm_sw_r_sms_apa_i_flT1DbHEY6CPC

Handy connectors
HKBAYI 50Pair / 50sets 3 pin JST SM Male Female plug LED Connector Cable For WS2812B WS2812 WS2811 LED Strip Lamp with 15cm Long Wire https://www.amazon.com/dp/B00NBSH4CA/ref=cm_sw_r_em_apa_i_ooT1DbGNZ4GFD

I also used some nice outdoor rated PSA foam tape to hold everything on along with a few black zip ties just in case. Wired everything and sealed with silicone. Make sure you don't serialize the strips they should be all connected in parallel so they chase in unison.
They are connected to my AUX power output using the standard automotive 12V plug. They come one when my bike does. Which is fine. If I want to turn them off you can do so from the app for the controller.

That's it. Now to start on the custom controller. Anyone connected to the CAN bus on this bike? That would be the easiest way to get speed.

u/donoftheslum · 5 pointsr/AnimeFigures

This is my collection one year in the making. Finally got my own place and set up some displays. Wanted to light it up and decided to create my own DIY solution. Designed, Measured, Cut, Soldered, and Attached it all over two weekends. Took about 20 hours total. See further below for WIP pictures. The color light pictures really don't do them justice. My phone camera sucks. They look much better in real life.

----

Close up's of each Display and Shelf, see the full album by clicking "Display" at the top for descriptions.

-

Shelf| Display 1| Display 2
---|---|----
Top| Miku Scales | Odds and Ends 2
2nd| Miku Nendos | Date a Dog Days Live
3rd | Miku Mix | Round 1, Fight!
4th | Odds & Ends 1| Lonely Sinon
5th | To Battle! | Cheerful Japan
Bottom | Empty | Empty

----

A nifty thing happens under blue light. A few of the figures have spots that glow. See here.

----

Sadly I didn't take too many images while working on the lighting, but I do have a few. See the descriptions for more info.

Here is a shopping list if you want to try your hand:

u/Monster-Zero · 1 pointr/IWantToLearn

Thanks :)

You could write sequences easily enough, and in fact it would be relatively trivial to fire them off spontaneously with simple pushbuttons as input to your microcontroller. When I put that costume together, I wore a little custom switchboard like a watch that had the arduino installed on it along with a series of pushbuttons and rocker switches to turn things on and off.


Syncing to music directly might be tough - certainly doable, but it may just be easier to have buttons which perform preprogrammed actions. There are a lot of ways things could go awry when trying to line up audio with circuits. For professional shows it's better to have an engineer or two (on further viewing, it looks like they had 3 guys manning this in the show) on the sidelines controlling all that stuff, but if it's just you a simpler and more adaptable route might be to program 8 or so actions, wire buttons from the arduino to your fingertips to fire them off, and rely on your own timing and coordination to get things really moving. Just a suggestion to avoid overcomplicating things, and using such a technique also allows you to be a bit more adaptable (say, for example, if you want to use the surrounding music like at a club as opposed to needing your own).


Also /u/Tinkrr2 is right about the voltage requirements varying by brand - make sure you look into that. Finally, if you're looking to make this into a semi-permanent hobby then it helps to have an adjustable power supply handy. A beefy battery, a sizable power supply, a few barrel jacks, some Dupont connectors, and most importantly an adjustable buck converter will take you very far. I wouldn't worry too much about any of this now, but if you decide you like tinkering with electronics (especially LEDs, which have moderate power requirements) that would be a terrific start.

u/chrizbreck · 1 pointr/ft86

I did it all myself so that saved money but basically this

1 roll, 2 to be safe. (I got this kit because it was cheaper than buying spools on their own at the time, didnt use the controller from here though you could and save more money. They were on sale at the time for like 15$ or something cheap af)
https://www.amazon.com/gp/product/B004T0BM0O/ref=oh_aui_detailpage_o02_s02?ie=UTF8&psc=1

Extra wiring
https://www.amazon.com/gp/product/B00XFSNKXS/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1

Bluetooth controller
https://www.amazon.com/gp/product/B00ZQVWU2O/ref=oh_aui_detailpage_o02_s01?ie=UTF8&psc=1

connectors to make life easier
https://www.amazon.com/gp/product/B00G1BYJQS/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1

splitters to make life easier
https://www.amazon.com/gp/product/B00OMKDUB0/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1

I wired mine up with switches and whatnot which cost a few extra bucks.

But overall should be able to do it sub 100$ easily.

u/curistanis · 2 pointsr/SpaceBuckets

I am also a neophyte, but have made several diy grow lights recently. Take everything I write with giant grains of salt.

You can buy a CXB3590 (3500 K, 36VDC) for $38 from digikey. An LED holder from newark ( http://www.newark.com/ideal/50-2303cr/led-holder-cree-cxa35-cob-array/dp/39X0077 ) runs about $3. You can buy a 900mA driver for it off amazon for $11 ( https://www.amazon.com/dp/B01MSANIYC ). You can buy a household AC box and a light switch for about $5 from home depot. Scrounge a PC AC cable, some wire for the DC side, some solder. Dig through old electronics for a good heat sink, a fan. Ask some computer folks for thermal paste.

That would bring you close to $50.

From that you can make a 30W led light, I think get over 5000 lumens, and it'd probably be pretty good quality, and not terribly dangerous.

For the AC side, do everything in the electrical box, and make sure it's grounded. Random stuff happens, don't let it happen to you. Electrical shock sucks, but poorly done AC wiring stuff could get hot, start a fire, so putting it in a box is a must. And it's really nice to have a the AC switch. You could simplify, leave out the switch, and use wire nuts, but it's still absolutely necessary to do that in a box and ground that box.

On the DC side, I used these barrel connectors ( https://www.amzn.com//B06Y4YXRMC ) with the wiring to the LED. It's also nice. EDIT: I don't know what these connectors are rated for, but they seemed pretty sturdy.

Sorry, again, I have some electronics background, but I'm new to lighting, so it's foolish of me to even comment.

u/CaptainCaaavemaaan · 3 pointsr/retrogaming

I did something like that for my Lego shelf. Used some LED strips and a motion sensor module to keep it all automatic. I had no idea what I was doing and bought a bunch of stuff I didn't need, but...

  • LED Strip - $7
  • Cable to run the power across the shelf - $8 (should've just used some spare cabling I had...)
  • Motion detector - $10
  • Power plug - $8

    And if you're comfortable soldering, that's pretty much all you need to get something up and running. But I wanted to make it all modular so I could take it apart and set it back up without too much hassle. So I ended up buying adapters and coaxial power cable things:

  • Ribbon to coaxial adapter - $5
  • Coaxial to regular 'ol cable adapater - $7
  • Power splitter - $6.50

    I'm pretty sure I did it as inefficiently and cost ineffective as possible because I have severe amazon impulse control issues and just buy shit to get started on fun projects. I'm sure with a little more research/guidance you could do it a little cheaper. But I'm happy with my setup for now.

    and here's a picture of the shelf. The shelf is terrible, and it's all a wreck because I'm in the middle of moving, but it shows the brightness pretty well. Oh and I have about a 1/4 roll of LEDs left, so I'd guess 2 or 3 rolls would take care of your shelf.
u/Somedudesmusic · 1 pointr/lightingdesign

My first thought would be to get these:

https://www.amazon.com/gp/aw/d/B01MG9KYCD?psc=1&ref=yo_pop_mb_pd_title

https://www.amazon.com/gp/aw/d/B00DTOAWZ2?psc=1&ref=yo_pop_mb_pd_title

https://www.amazon.com/gp/aw/d/B00XFSNKXS?psc=1&ref=yo_pop_mb_pd_title

https://www.amazon.com/gp/aw/d/B00D7CWSCG?psc=1&ref=yo_pop_mb_pd_title

You’ll get 10 DMX channels of RGB control that can support 10ft of LED strip each. Put a few inches of LED in each lantern then connect to the next, so you’d be able to link together about 15-20 lanterns or more on a single channel. Won’t be “individually” controllable, but you’ll have control over the groups of lights that are connected. Do this for each of the 10 channels and you could easily fill a room.

Super interested to hear everyone else’s approach for this

u/RoseHearth · 1 pointr/Random_Acts_Of_Amazon

When things settle down for me too, maybe :) money's tight but eventually if theyre still there when i can, i will.

We also bought the connector clips (so it can bend around corners and stuff), extra wire (for extra length), and connector ends (for the extra wire).

The whole thing is super easy and quick to put up! As a warning, the peel and stick backing isn't good at all, so i would recommend buying stuff to help it stay. We used sticky tack since it doesn't hurt the surface so we can take it off if we need to. We left it on a long time (6 hours) and it barely heated up at all. Just about as warm as a starbucks coffee cup. As long as it's not on all the time it shouldnt heat up at all

u/TUKA_BEAR · 1 pointr/gamingpc

It was a bit of a crude process and I wish I had the tools to do it more effectively but basically what I did was take a high density RGB LED light strip and connect it to a four pin strap connector (link below). I then took out the white led and reflector from the inside of the card and replaced the whole reflector with the light strip. Next I took the GTX logo out of the card and sanded off the green outer coat on the lettering and placed it back inside, I put a few pieces of printer paper between the lights and the logo to help with light dissipation and routed the cable out through a small hole next to the IO shield on the front of the card. sorry that this isn't the best step by step guide on how to do it (I honestly got into it without a clue what I was doing) but hopefully this helps just a little bit with your process. Thanks for asking!

​

https://www.amazon.com/iCreating-Connector-Conductor-Controller-Solderless/dp/B074G48LWQ/ref=sr_1_5?keywords=rgb+strip+connector&qid=1550632831&s=gateway&sr=8-5

u/ArtyFizzle · 1 pointr/lifx

I have had success with [these] (https://www.amazon.com/gp/product/B01EIDDQCS/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1 strips). I have 2 in between 3 Lifx z strips. But like everyone is saying, be very careful. Both because they don't fit exactly and you void your warranty once you intro non Lifx made products into the mix. When connecting, don't be too forceful.it's all about technique. also, make sure these strips are all continuously oriented across the entire loop. there's an "up", and a "down" orientation to these strips. i marked mine to help with consistency. once all put together, these will work beautifully.

u/powell730 · 3 pointsr/battlestations

So this is my, in progress, setup. Please ignore the mess as I've been changing things around, adding stuff etc. And yes the TV power cord will eventually be hidden 😉

My goal is to RGBW the back of the desk. I at least wanna do the whole straight desk and possibly the curved part too(opinions?). That's simple enough and I have the LED strip to do that. My question comes in for the monitor and TV. I'm not sure of the best way to get RGBW strips behind both of those without running separate power supplies etc. I don't want to do this so they all operate off the same remote.

I have this being shipped to me and I was just gonna run the cable through the wall to each screen, then attach additional LED strip to it:

http://s.aliexpress.com/qyIfeiUN

1, I'm not sure how to attach it. Do I solder the extension onto each end? And #2, should I buy some sort of connector that's easier? That's where I'm getting confused. Because I see things like these and they seem so much easier:


https://www.amazon.com/dp/B013JRRPCG/ref=cm_sw_r_cp_apa_98iSybFKW6B25
Or
https://www.amazon.com/dp/B019MTK554/ref=cm_sw_r_cp_apa_P9iSyb3JRFMJK

Thanks!!

u/MayBeTall · 2 pointsr/Vive

I bought these: https://www.amazon.com/gp/product/B06XDLMYMQ/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1

They make the controllers very heavy. After taking both the protective shell and skin off the controllers it felt like the controllers had no weight to them at all. I took them off because I was having tracking issues and because I'm not doing anything but development right now. Most likely the tracking issues are my own fault - my setup isn't the best and I haven't taken the time to improve it.

I am 6'5" or so. I hit my ceiling when playing games, so the shell is great for protecting my controllers. I'd recommend them for problem games but not for full time use.

Edit: Not on topic but this is the best accessory I've bought. Two switches to turn the lighthouses off. https://www.amazon.com/gp/product/B01CWNMB86/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1

u/thatgermanperson · 1 pointr/pcmasterrace

How long? RGB (white is blueish) or RGBW (extra white LED)?

This seems to be the same model I used for a project (giant lamp). Worked perfectly fine. Afaik if you got yourself another controller it'd respond to the same remote.

You can cut the stripes as you see fit and reconnect them. You'd need something like this for easy connection when you cut it up. As an extension cable you can use whatever you like as long as it provides 5 wires.

u/Mysta · 1 pointr/motorcycles

So one thing to note is you should have good plan to solder, unless you plan on using that last link, but those are way too big. These wires are like 26 gauge. Also when you cut silicon it makes it not water proof, so may need some like silicon or something to seal each end.

Could use something like this:
https://www.amazon.com/iCreating-Connector-Conductor-Controller-Solderless/dp/B074G48LWQ/ref=sr_1_4?ie=UTF8&qid=1539742033&sr=8-4&keywords=led+strip+to+wire+connector+3+pin&dpID=51kzc4nBvjL&preST=_SY300_QL70_&dpSrc=srch

or this

https://www.amazon.com/Alightings-Connector-Waterproof-Lights-Connection/dp/B06XHCFMB5/ref=sr_1_3?ie=UTF8&qid=1539742033&sr=8-3&keywords=led+strip+to+wire+connector+3+pin&dpID=511V-NwYvlL&preST=_SY300_QL70_&dpSrc=srch

Just look for 3 pin wire to strip connector or something like that.

u/closet_otaku_desu · 7 pointsr/AnimeFigures

I'll link the full order:

u/KANahas · 1 pointr/led

Another option that I've been doing a lot lately is using JST SM connectors, as such: https://smile.amazon.com/MagicW-Connector-Female-Cable-Light/dp/B01G9RWRDA/

They lock together, and come in 2, 3, and 4 pin. You've still got to solder them onto the wires but once installed, they are pretty quick to snap together. Not sure if you're using your LED strips more than once, but these make it pretty convenient.

Also, generally the wires are pre stripped to the right length so you can just cut the strips where needed, then solder straight to them. Flux is helpful and should make it quicker.

u/boydo579 · 1 pointr/howto

Hey guys thanks for all the comments, this is my first successfully contribute post! :D ! below are the parts list with direct amazon links. Any laptop power supply will work fine, just try to find one with multiple connectors so you can get the right input the first time.

Ill be doing the underside of the cabinets next. Should i make a seperate post or just add to this one?

.

Tools: Scissors, super/wood glue, some heavy things.

Optional: wire cutters, duct tape, flat head screwdriver, saw, hammer, utility knife/razor, ladder/bucket.

Tips: Test on green, separate power supply, gloves for super glue, pre-bend daisy links before connecting.

LED: http://www.amazon.com/gp/product/B00KCHRKD6/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1

daisy links: http://www.amazon.com/gp/product/B00977FHG4/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1

u/diykidprojects · 2 pointsr/lifx

When I disconnect the last strip I get no lights anywhere. To test what may have happened I also tried connecting a completely new light strip to the power supply and controller but this also yielded no light. I am assuming this is because I fried the controller and/or power supply. Hopefully the actual strips are still functional but time will tell. I have purchased a new 'starter kit' from the Best Buy and will be testing the viability of a run of my intended length soon (before actually mounting any wires in my shelves). I am also going to try to use some Hualand extension cables to see if they will be more stable than my homemade extensions with soldered connections. My basic plan is to run eight 3.3 foot LIFX strips with a 6.6 foot Hualand in between each strip to see if the power supply and controller can handle the voltage drop that will result from this kind of run. I am cautiously optimistic that this approach will at least determine one way of the other if LIFX strips will be able to do what I want them to before I start running cables and making connections in tight spaces behind and under shelves. Will try to update this post once I have tested this out.

u/chance1117 · 3 pointsr/HomeImprovement

I used SMD RGBWW Lights from Amazon. Here is and album of them at night. I have used 3 of 4 strips so far. The remote works great from a long distance without line of site and allows for multiple zones. I have it set on a timer to turn on at dusk. I leave them on fading between colors and during holidays I can choose whatever color I see fit. It is a bit of work but I love the look. Very unique.

Supplies:

u/DarknStormies · 5 pointsr/boating

So I bought a used 2008 pontoon last year, and decided to do a budget update to get her ready for the new season. Tried to keep it under $1000, but the last minute decision to get a new Bimini put the project over that.
For those curious, here are the materials I used.
60' of .030 black aluminum paneling: $295 from Pontoonfence.com

Nav Lights:$20
Docking Lights: $30. I'm keeping an eye on these. Some reviews complained of them not being waterproof. I ran a bead of silicone around the lens and where the wires enter the body. Hoping they hold up.
Waterproof LED Strip Lights $40 for two sets. I'm really happy with these.
LED RGB control wires $9

Polk DB651 6.5" Speakers $118 ($59/pair)
Kenwood Marine Bluetooth Amplifier $135
Pyle Marine speaker wire $9
Engine Parts (Plugs, Impeller, Lube) $40
Power wash rental: $30

Misc expenses (mounting tape, nonskid tape, screws, bolts, etc) ~$100

Replacement Bimini and boot from restorepontoon.com $219
Total: $1,045

u/_sch · 2 pointsr/HomeImprovement

This is the one I've been using: http://www.amazon.com/gp/product/B0040FJ27S/

There may be better and worse ones out there; honestly I don't remember how I chose that. But I have three of them and they've worked well for me.

So far I haven't run into any problems. When/if you splice the strips, obviously make sure you keep the wires in order. They sell pre-made connectors and splitters, but I didn't really use any of those. I did buy some of these connectors: http://www.amazon.com/gp/product/B006VZKSNC but all I ended up using them for was the raw wire (I cut the ends off an soldered them directly to the strips).

In the Arduino-controlled setup, I re-used the power supply that came with the strip, and just fed it through the mosfets linked above. I discareded the remote and the little controller box (well, I filed them away for potential later use).

In my application I found that the adhesive on the back of the strips didn't work very well, so I ended up taping it up with gaffer tape. That works well for me because the strip is in a recessed area you can't see unless you crane your neck to look for it. But if the strips were somewhere more visible, I'd need to look for a more elegant mounting solution.

u/SuperAngryGuy · 2 pointsr/SpaceBuckets

I was running this at 2.5 amps without a heat sink but it will take much more if you have a fan or heat sink. 18 gauge wire will do fine with some headroom (1mm if metric). 20 gauge wire would normally be fine but low voltage wire can come in a connected pair so they are derated. For example, this 20 AWG wire pair is being derated to 3.2 amps by the manufactuer although the current-wire size charts would normally show this wire to be fine. That wire would be fine for 30-35 watts on this LED and the same wire I used on my testing.

Buy this 18 AWG wire:

https://www.amazon.com/BNTECHGO-Silicone-Flexible-Strands-Stranded/dp/B01AQOI36M/ref=pd_lpo_sbs_60_t_0?_encoding=UTF8&psc=1&refRID=YPDAJMHZ4QMNAVG1TRSJ


Keep in mind that this is a constant voltage setup that you're likely doing. 12.6 volts and 12.8 volts can have a significant difference on current levels and how hot this COB gets so you want to actually measure the current level. Different COBs can have different voltage drops and COB temperature also plays a role in voltage drop and thus current levels in a constant voltage setup.

u/BorrowedStardust · 1 pointr/battlestations

Basically you just connect them to a 12V power supply and a controller. You can cut the strips to whatever lengths you need and wire them in series. This guide has a lot more information. The ones that I used are the brighter 5050 RGB LEDs.


If you don't want to mess with ordering the parts separately you can find kits like this one. Also, if you want to cut strips and not have to mess with soldering them together you can get straight connectors like these or connectors like these for any right angles that you need to make.

u/DogNamedCharlie · 1 pointr/buildapc

There are lots of options for this. I personally did my own mod where I used a Corsair Lighting Node Pro and use software to control it: https://www.youtube.com/watch?v=kgMd2CcUkBQ

The 12v Analog RGB strips would be the easiest in terms of controlling as you can buy bulk RGB strips and solder less connectors like these to control your lighting: https://www.amazon.com/iCreating-Connector-Conductor-Controller-Solderless/dp/B074G48LWQ/ref=sr_1_1_sspa?keywords=solderless+rgb+strip&qid=1571675396&sr=8-1-spons&psc=1&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUEzU1lSR1o3VDk2S0VOJmVuY3J5cHRlZElkPUEwNTEyNzg1M1I1R0NaNVFBUkVRNiZlbmNyeXB0ZWRBZElkPUEwNDI4MDU3Mkg1NE82WjVBM1RUTSZ3aWRnZXROYW1lPXNwX2F0ZiZhY3Rpb249Y2xpY2tSZWRpcmVjdCZkb05vdExvZ0NsaWNrPXRydWU=

The 5v Addressable is a little more work as there are different standards that companies use for connectors. Though if you are comfortable with a solder iron and crimping connectors, then that is an option: https://www.youtube.com/watch?v=6Dl9yd_Nxqk

u/FanxySkull · 1 pointr/AnimeFigures

Ok so I was thinking of using the LED strip, then use the T-shape connector and the L-shape connector to connect all the strip together. The T-shape connector will be connect with a cord as well like in the diagram I drew. But I’m a noob and I don’t know if this is possible to make, and what kind of cord or wire should I use in this case? Anyone have any idea or guidance here to help me out?

u/Lemmegetacalf · 1 pointr/pcmasterrace

The phanteks header is the standard 5050 led header it looks like. Pretty sure the LEDs you want have these, but if not....
You'll need something like this

iCreating 10PCS LED 5050 RGB Strip Light Connector 4 Pin Conductor 10 mm Wide Strip to Controller Jumper Solderless Clamp On Pigtail Adapter for 5050 Color Changing Flexible LED Strip light https://www.amazon.com/dp/B074G48LWQ/ref=cm_sw_r_cp_apa_SDtNAbSPZJK9Q

u/4a757374696e · 2 pointsr/malelivingspace

I used this light strip from Amazon. I'm really happy with them. Installation was a breeze. I bought a splitter and L-shape connectors to make things easier.

u/muzf · 1 pointr/Vive

Sounds like a similar situation to mine. I've been using separate seated (in my small computer room) and room-scale (in the lounge, next room) since the beginning. However, I don't use any extra base stations, instead using some [quick release plates] (https://amzn.com/B000JLK5PU), [DC switches] (https://amzn.com/B01CWNMB86), and extra DC adapters. Changing positions is just a matter of turning it off and unlocking at the original position, relocking and turning on at the new position, then going through Steam's room setup. The process is relatively quick, although going back to room-scale takes a little longer (it would be great if Steam added a way to 'save' profiles).

u/fatasianboi · 4 pointsr/ToyotaTacoma

So we bought some RGB led's from amazon, auto wire, a switch and [extension wire] (http://www.amazon.com/Color-Extension-Cable-Line-Strip/dp/B00DPQMKBS/ref=sr_1_1?ie=UTF8&qid=1416110978&sr=8-1&keywords=rgb+extension+wire)

Tap into the 12v cig plug(or any 12 volt that turns off with your car) and run it to the power side of the controller box. Then cut the led's to length and use the double sided tape that comes with it to hold it in place out of sight. Solder the extension wire between the driver and passenger side footwells and to the back. The front was easy, however the backseat was harder.

We had to take the seats out in the back to run the wire under the carpet to keep it hidden. Then there's a 1/4" gap where we put the lights. It is on the bottom, where the seat fabric meets the metal frame of the seat.

To run it to the bed, we had to take the plastic storage behind the seat to find a rubber grommet that is on the driver's side behind the seatbelt about 6-9" from the floor. Its a 1/2" rubber grommet that just plugs a hole and has no other purpose. then run the wire beneath the bed.

We took the railing on the sides of the bed(4 torx bolts per side) and then popped off the plastic that sits on top of the bed sides. Using 3M 20lb double sided tape, we attached the LED's to the bottom side of the rails that were removed. Then the wires were run through the holes that hold that plastic top piece in place. Those holes give access to the inner fender wells where the wire was securely zip tied and run to the other side of the bed and the same process was done.

We later found out that the lights in the bed cannot be in their fade mode while the truck was in motion, so we had to run a separate switch to the bed section so it could be turned off independent of the interior lighting.

If you have any specific questions, feel free to PM me and ill call my buddy to take more pictures for you! It was his new truck that we did it to, not my personal car.

u/Evil-Mike · 1 pointr/DIY

Awesome product, thanks for letting me know it exists.
If you scroll along the "Customers who bought this product also bought" bar on that page you'll find These connectors and they lead on to loads of different options.

u/mrwebguy · 2 pointsr/homeautomation

OP Delivers and sorry for the delay. Thanks to /u/maxwellsearcy for reminding me!

  • Dresden electronic ballast (Zigbee)
  • 50/50 4 Conductor Light Strip Connectors
  • Phillips Hue Dimmer Switch
  • Supernight 50/50 24V lights

    Now, cut the plugs off one side of the lights and off the power supply. Match the wires up on the Dresden ballast with RGB+ on the LEDs. Carefully strip away the outer shielding on the power supply cord and then strip the tiny wires on the inside of the power supply wire. Put those into the power screw points on the Dresden. Plug it in and test. It should come on a solid color.

    Now that you have it working, go into your Hue app and scan for new lights. You will see 2 lights pop up for every Dresden ballast you configure. Once it's done scanning, click them in the app and make sure they flash. One of them will NOT flash and you can safely delete that one.

    That's it!
u/SlayterDevAgain · 1 pointr/Homebrewing

I'll try to remember to take some pictures tonight but here's the basics:

Parts:

  • Standard 120mm computer case fan
  • Power supply
  • Connectors

    So what you're going to do is cut the connector off of the fan. Strip the wires back. Some fans have three or four wires. Mine had three. What you're looking for is the positive and negative wires which are most likely red and black. Strip the insulation on these wires to expose the bare copper. It sometimes helps to expose enough to fold the copper and double it up to make it easier to screw on the connector. Feed the red wire (positive) into the + side of one of the female connectors. Screw it down and do the same for the other side. Now just connect it to the power supply and you're done!
u/techieman33 · 2 pointsr/lightingdesign

Here's what I would get as a budget option. The products posted are just examples, not necessarily something I would recommend. Just what I came across with a quick search on Amazon. I did something similar in my bedroom by dropping strips into crown molding that I put up about 6" below the ceiling.

LED strip lights, this will let you make 2 lines of them on top of the beam. Lay them out and test them before you tape them down, you may find that you need to mount them on something to give them a little angle to get full coverage. Your just going to have to experiment.

Jumper cables. These will let you cross the bumps in the beam without the lights sticking up and looking ugly, and then turn around to power the 2nd line. Get enough to make all the jumps you need, the turn and a couple extra.

Finally ditch the cotroller they come with. Those IR remotes are all crap and don't work very well. You have to end up standing in just the right spot with the controller pointed just right to make changes. Next I tried a wifi option with an app to control the lights. It worked ok, and being able to set them to turn on and off at certain times was nice. The problem was that it was slow, I found myself not turning them on very often because it would take a minute or two to open the app, wait for it to find the lights and then turn them on and change colors. I ended up with a remote similar to this one that was RF with a color wheel. It's not as precise as the wifi app and doesn't have lots of nifty features, but it's simple and easy.

u/In_between_minds · 1 pointr/DIY

These look like "dumb" led strips (no onboard electronics). You either need to solder the ends or use one of the solderless connectors. These are for making nice corners: https://www.amazon.com/Connector-JACKYLED-Non-waterproof-Splitter-conductor/dp/B011BD2B5Q/ref=pd_sim_86_24?_encoding=UTF8&pd_rd_i=B011BD2B5Q&pd_rd_r=YBEV9BRYYGQ25YR29T5C&pd_rd_w=NsgMN&pd_rd_wg=gO6Fc&psc=1&refRID=YBEV9BRYYGQ25YR29T5C and these can be used to join strips https://www.amazon.com/Zitrades-10PCS-Connector-Conductor-Jumper/dp/B00977FHG4/ref=pd_sim_86_28?_encoding=UTF8&pd_rd_i=B00977FHG4&pd_rd_r=YBEV9BRYYGQ25YR29T5C&pd_rd_w=NsgMN&pd_rd_wg=gO6Fc&psc=1&refRID=YBEV9BRYYGQ25YR29T5C

The one's you linked should work. I'd highly suggest connecting each monitor's strip in parallel as well to reduce issues with how much current the strips draw and avoid having some of the LEDs dimmer (the ones at the far end of the strip)

u/CloysterDitch · 1 pointr/DIY

Mobile Users: This is pretty photo heavy.

​

I've worked on this over the last two and a half weeks in the evenings and on weekends. I've probably got around 50-60 hours in so far.

The project is complete, there are just some other things I'd like to eventually do with the programming for the LEDs.

Tools

Exacto/razor blades

Heatgun - for heat shrink, you can just use a lighter

Soldering Iron

Phillips Screwdriver

Laptop/Computer for programming with Arduino or CircuitPython

Printer - laser or inkjet

​

Supplies/Parts

Various Rustoleum Spray paints - $20 total

Multi-Strip - $15

Masking tape and paper - $10-15

Extra razor blades - $5

Printer sticker paper - $15

Electrical Tape - $1

3m double sided foam tape - $4

Heat Shrink - Not sure, maybe $5 new for the assorted kit?

Adafruit Trinket: https://www.adafruit.com/product/3500 - $8

5v 4 amp Power Supply: https://www.adafruit.com/product/1466 - $15

White LED On/Off switch: https://www.adafruit.com/product/917 - $5

White LED Momentary Switch: https://www.adafruit.com/product/558 - $5

DC Power Jack: https://www.adafruit.com/product/373 - $0.95

Small Perma Proto PCB Board: https://www.adafruit.com/product/1608 - $3

50 feet (I used about 15 feet) 4 pin RGB extension wire: https://www.amazon.com/dp/B07GFW6ZB3/ref=pd_luc_rh_sspa_dk_huc_pt_expsub_2?psc=1&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUExUlMwQ1ZSRzJSQ0tUJmVuY3J5cHRlZElkPUEwNTQzMzg2M1FSRk9TSUFIMllNMyZlbmNyeXB0ZWRBZElkPUEwMzEzNDU5QlQ3MFBCSTZKRUVDJndpZGdldE5hbWU9c3BfaHVjX21yYWkmYWN0aW9uPWNsaWNrUmVkaXJlY3QmZG9Ob3RMb2dDbGljaz10cnVl - $10

50 pair (lol) JST Connectors: https://www.amazon.com/gp/product/B00NBSH4CA/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1 - $11

16.7 foot reel of addressable LEDs: https://www.amazon.com/gp/product/B01LSF4Q00/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1 - $21

​

I think that's all of it, I'll update if I think of anything else.

u/Shabbypenguin · 1 pointr/pcgaming

https://www.amazon.com/gp/product/B011BD2B5Q/ref=oh_aui_detailpage_o05_s02?ie=UTF8&psc=1

https://www.amazon.com/gp/product/B00NLAMS9C/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1

https://www.amazon.com/gp/product/B00TT2QM5W/ref=oh_aui_detailpage_o05_s00?ie=UTF8&psc=1

https://www.amazon.com/gp/product/B01FSGGJLY/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1

measured and cut led strips, connected them via the corner connectors. the end of the led strip comes with a power plug and a 4pin connector (looks similar to a PWM fan connector) connect that with the rainbow wires to a programmed arduino.

https://www.amazon.com/gp/product/B01EAF4YNE/ref=oh_aui_detailpage_o05_s01?ie=UTF8&psc=1

power supply i used. it was more expensive to get it via amazon, but those are the parts i used to make a solder-free setup. you could order same or similar parts and get it real cheap from china.

https://youtu.be/NIIXmleTbP0 video of it in action :)

u/Geek2TheBone · 1 pointr/pcmods

Thanks.

I'm going with this 12v 4-pin light strip with these splitters and to keep it clean, some extension and right-angle options.

u/AGENTxPLATYPUS · 2 pointsr/AnimeFigures

Hey OP, instead of keeping the info in chat I'll post here so others might be able to use it.
I'm assuming you have no experience splicing wires, soldering, or using heat shrink tubing, so I found some quick connect things you should be able to use.

So, the parts I have here are the LED Strip (marked as 'sections' since you will be cutting it), the L Connectors, the 'Wire Harnesses', the Adapters, and the Wire itself.

I drew up a small diagram here with explanation.

​

If you, or someone you know would be able to do the stuff mentioned above, this could have a lot less parts by doing aware with the adapters and wire harnesses and just soldering the wire between LED strips.
(Maybe there is a local Makerspace near you that could assist)

​

Also, instead of the LED strip method, I've seen people with LED bars the run the length of the shelf, and have wires to connect up to another bar. Something like this. (search" LED under cabinet lighting")
If the above diagram seems too difficult, or you're not able to get anyone to assist, then this would be a super easy option for you.

​

u/Heffeweizen · 3 pointsr/shutupandtakemymoney

Just run extension cords behind the wall or within the cabinets. That way stove heat won't be a problem. If you want to save money just buy bulk wire. But if you connect more than 16ft of lights in a single circuit, then you needed an amplifier which needs to be plugged into an extra power supply otherwise the lights near the ends of the circuit will be dimmer and also off color. Color correctness comes from adequate power.

u/reginald-iii · 2 pointsr/HomeKit

This is my next project...

https://github.com/steve228uk/homebridge-magichome

SUPERNIGHT WIFI Wireless LED Smart Controller Working with Android and IOS System Mobile Phone Free App for 16.4ft 300 LEDs RGB LED Light Strips https://www.amazon.com/dp/B01JS0KEBW/ref=cm_sw_r_cp_api_XJn-ybKJ9WEBS

Alightings 4pin LED Connector Connect Wire to Strip, Applicable for 10 mm 5050 RGB Waterproof LED Strip Lights, 22 - 20 AWG Cable Without Stripping the Wires https://www.amazon.com/dp/B01I8CDF58/ref=cm_sw_r_cp_api_jKn-ybEXT5PVQ

EvZ 4 Color 10m RGB Extension Cable Line for LED Strip RGB 5050 3528 Cord 4pin https://www.amazon.com/dp/B00DPQMKBS/ref=cm_sw_r_cp_api_yKn-ybSYT4318

EPBOWPT 12V 5A Power Supply AC Adapter for 5050 3528 RGB LED Strip Light Low Voltage Device https://www.amazon.com/dp/B01KT20TNG/ref=cm_sw_r_cp_api_OKn-ybWC82QCH

SUPERNIGHT (TM) 16.4FT 5M SMD 5050 Waterproof 300LEDs RGB Color Changing Flexible LED Strip Light https://www.amazon.com/dp/B00DTOAWZ2/ref=cm_sw_r_cp_api_4Kn-ybSM88NFB

u/EliTheAsianGuy · 1 pointr/buildapcsales

The LED strips are cut-to-length at specified locations (usually indicated by scissor icons).

You can either go with an adapter or do it yourself method. If you want to use an adapter or premade connector you can use something like: 90 Degree Connector or RGB Connector. If you want to look for other products just lookup something like "RGB LED Strip Connector."

If you want to go the DIY path to route around curves or sharp 90-degree bends, you will need to cut the strips and solder them together. You'd want to use small wire, so if you maybe have a spare ethernet cord, you could use the wires found within to use as connectors.

u/muchcharles · 2 pointsr/Vive

Set your third lighthouse as channel c, and make sure it has optical line of site with your channel b lighthouse. Now just turn off one or the other channel c lighthouses depending on whether you are sitting or not. It should let you configure both as separate tracking universes unless there is some restriction over reusing one like that.

Buy these to help with toggling one or the other off:

https://www.amazon.com/gp/product/B01CWNMB86

u/jephthai · 1 pointr/AskElectronics

Yes, you should just make sure that the charger is rated for the current you'll draw. There are plenty of options for using the barrel connector. I keep a bunch of these guys around to power things. What kind of laptop uses a 5V charger?

u/smattk · 7 pointsr/vinyl

It is pretty easy to use, it has adhesive backing so it sticks. You can cut it to the length you need. I used These to connect the different strips that I cut. I also got some of This to extend the connectors.

u/Joey22688 · 1 pointr/NZXT

The actual extension cables between the led strips are pretty standard https://www.amazon.com/ESUMIC-Cable-Connector-Extension-Female/dp/B00XX41VD0/ref=sr_1_3?s=electronics&ie=UTF8&qid=1502315577&sr=1-3&keywords=led+extension+cable
Just an example but make sure they the arrow telling you where the 5v is for whatever size you buy.

u/BandCampMocs · 1 pointr/fpv

Thank you! I see amazon has several. Is it 1.0? 2.0?

Here's a bit of what I found:

20 Sets Mini Micro Jst 2.0 Ph 3 Pin Connector Plug Male With 150mm Cable & Female https://www.amazon.com/dp/B01DUC1PW6/ref=cm_sw_r_cp_api_wkMDzbY8XK2KT

HKBAYI® 10Pair / 10sets 3 pin JST SM Male Female plug LED Connector Cable For WS2812B WS2812 WS2811 LED Strip Lamp with 15cm Long Wire https://www.amazon.com/dp/B00NBSF724/ref=cm_sw_r_cp_api_7kMDzb3MHSA56

20 Sets Mini Micro Sh 1.0 Jst 3-Pin Connector Plug Male With 100Mm Cable & Female https://www.amazon.com/dp/B01DUC1KEO/ref=cm_sw_r_cp_api_BlMDzbRQWQ2J3

u/Tural- · 3 pointsr/SteamVR

Same, but mine don't have an extension so you have to be tall enough to reach them, but here's a link for anyone interested.

https://smile.amazon.com/gp/product/B01CWNMB86

u/PhantomTaco · 1 pointr/MechanicalKeyboards

Ah you're right, my apologies. Yes the plan is to buy THIS led kit and THESE connecting wires and solder a connector onto the pcb which will connect to one strip of about the same number (7) leds, and then an extension wire over to the back side for an additional strip of 7 leds. Basically the plan is to add an additional 14 leds to it.

u/jtrias21 · 1 pointr/battlestations

Yes, that's correct. The 150 LED Weatherproof Kit.

Yes, I cut them and daisy-chained them to the back of the monitor with this:

u/BillDaCatt · 2 pointsr/led

Soldering is a good skill to have and basic soldering irons are very inexpensive. Try it!

Your other option is to buy longer wire and use strip to wire connectors on both ends of the wire.

u/poptix · 0 pointsr/DIY

Skip the wood frame and buy 3M sticky backed LED strips.

Also: 10X L shape 4 Pins Connector JACKYLED 10mm Non-waterproof Quick Splitter Right Angle Corner Connector 12V 72W Clip for 3528/5050 SMD RGB 4 conductor LED Strip Lights Strip to Strip (22Pcs Clips) https://www.amazon.com/dp/B011BD2B5Q/ref=cm_sw_r_cp_apa_i_d0t9AbE9153VY

Nice work overall!

u/gettingbored · 11 pointsr/BurningMan

Easy way to make really obnoxious portable LED projects:

  1. Aquire the items below.
  2. Play with them. ("oooohhh ahhhhh... Why doesn't my brain let me sleep with these as a nightlight?")
  3. Hack them into new things.
  4. |<0>=<0>|
  5. Ghosts and stuff



    USB Battery for 5v power. Minimum 2A output.

    USB to barrel jack adapter

    Radio Remote Control - lots of options here

    Extra connectors

    ws2812b LED strips
u/tbhooptie · 2 pointsr/smarthome

Don't waste your money with Phillips Hue strip lightning. There are generic brands that connect directly to a Google Home or Alexa device, assuming you have one... You get way more length and they are much more vibrant. I have had mine for over a year with no issues.

The lights https://www.amazon.com/dp/B076RNNH1F/ref=cm_sw_r_cp_apa_MlWKBbB03197B

The connectors I bought https://www.amazon.com/dp/B078VBVVMW/ref=cm_sw_r_cp_apa_.oWKBbS9RAMP4

For smaller jobs there are smaller sets of connectors...

u/Graphitetshirt · 1 pointr/DIY

Any reason you didnt just use connectors like this?

u/root5b · 1 pointr/watercooling

I just pick a random manufacturer that has decent rating on Amazon, but this the one I bought: econoLED 12V Flexible SMD 5050 RGB LED Strip Lights, LED Tape, Multi-colors, 300 LEDs, Non-waterproof, Light Strips, Color Changing, Pack of 16.4ft/5m Strips https://www.amazon.com/dp/B006LW2NJM/ref=cm_sw_r_cp_apa_iVSazb46NR2QD


Some right angle connectors if u need it:
10X L shape 4 Pins Connector JACKYLED 10mm Non-waterproof Quick Splitter Right Angle Corner Connector 12V 72W Clip for 5050/3528 SMD RGB 4 conductor LED Strip Lights Strip to Strip (22Pcs Clips) https://www.amazon.com/dp/B011BD2B5Q/ref=cm_sw_r_cp_apa_BWSazb8PFRMJN

u/_ataraxia · 1 pointr/snakes

the stack of three [eventually, four] 421Ds has taken over a whole corner of my living room. now that they're all on full display when i have guests over, i'm finally trying to up my aesthetic game.

i bought these LED strip lights, which can be cut down to whatever length, and this power supply. i also bought some extra wire and connectors so i can, eventually, run one long strip of LED lights through all four enclosures. the strip has an adhesive backing, but i used hot glue to secure it to the enclosure ceiling about an inch or so away from the front wall/door.

u/meezun · 1 pointr/adafruit

You need connectors like this or you could get a bunch.

u/dftba123 · 1 pointr/pcmods

The fan connects directly to the GPU on the inside of the housing. It appears to use a So the internal connector for the fan appear to be JST connectors:

Blurry Pics I will need to take it apart again for better ones


  • 4 pin for the fan Amazon???

  • 2 pin this is from the 4 pin connector Amazon or This for the pump. The polarity appears to switch and the pump does not work if plugged directly into the board. (Don't think it is supposed to be but it fit) Not sure if this is because there is no RPM reading or the polarity is switched but the pump doesn't run.

u/BadServo · 1 pointr/cade

I ordered this LED strip light kit from Amazon:
https://smile.amazon.com/gp/product/B016CDCM54/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1

I also ordered these connectors:
https://smile.amazon.com/gp/product/B00977FHG4/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1

The kit comes with 16' of lights, and you can cut them to the length you need and use the connectors to bind them for working around corners or covering large spaces. Taking into account the space in my marquee that's lost to the speakers, 16' was just enough, but the inverter that comes with the kit can drive more, so you could order an additional strip by itself on the cheap to expand if needed.

u/kungfuaddict · 1 pointr/lifx

Agreed! 100% I'll be testing THESE after arrival later today.




u/woodfurnace · 1 pointr/DIY

Then you would want this

EvZ 4 Color 10m RGB Extension Cable Line for LED Strip RGB 5050 3528 Cord 4pin https://www.amazon.com/dp/B00DPQMKBS/ref=cm_sw_r_other_awd_p4-NwbH302Q8D

Soldering was simple for mine, it may be a slight headache for the multiple wire, but will look good. I have about 8 feet of wire along with the 16 feet of lights and there isn't an issue, i believe my power supply is 3A. I think i recall someone said they had 4 of them on a 3A supply without any issues. I would advise a drop of hot glue at the soldered ends to keep the weight of the wire pulling everything down.

u/No_real_relevance · 1 pointr/lifx

I bought some of these based on another post (sorry I forget the poster).
https://www.amazon.com/TronicsPros-Extension-Connector-Flexible-Adapter/dp/B01EIDDQCS/ref=sr_1_20?ie=UTF8&qid=1520053634&sr=8-20&keywords=Litaelek+2

They have been great. I’ve only used the 1m but they still work if setup with multiple extensions connected together.

u/Senior420 · 1 pointr/farcry

Well the 3M arsenal of stickyness does include post it notes so there are varied stickystrenghts. I thought about the corner kinks so I bought corner attachments that keep it flat. Since the back of my TV is so smooth, no matter what happens, they still fall off from the weight of gravity. Velcro doesnt work, the only saving grace is Duct Tape. Not fancy but definitely unseen.

u/innerfrei · 1 pointr/buildapc

The strips usually ends with a cable and a 4pins male connector. But you also need to buy an adapter (look at my first comment ;) ) because also the motherboard got a 4pins male connector. So you need a female to female 4 pins cable. And if you plan to use the strip that you just cutted, than you need this kind of adapters:
https://www.amazon.com/WOWLED-10PCS-Female-Connector-Strip/dp/B01A0B8O24/ref=sr_1_3?ie=UTF8&qid=1505487537&sr=8-3&keywords=4+pin+cable+led+male


Also I suggest you to buy these connectors since it's pretty difficult sometimes to attach the strip on angles, with these you can just cut the strip in two pieces and connect it with the adapter:
https://www.amazon.com/Zitrades-10PCS-Connector-Conductor-Jumper/dp/B00977FHG4/ref=sr_1_4?ie=UTF8&qid=1505487310&sr=8-4&keywords=led+strip+connector


EDIT: Regarding rainbow effect, that is what I was talking about. The whole led strip will change color continuously but always one color at once.

u/ASIWYFA · 22 pointsr/DIY

For anybody that want's to do this but are scared to solder,or just want things easier. They sell connectors for these light strips that get rid of having to solder completely.

http://www.amazon.com/dp/B00977FHG4/ref=wl_it_dp_o_pC_nS_ttl?_encoding=UTF8&colid=3A3W1Z0CUSK9T&coliid=I26ROOAIL77ZA4

u/GlassPanther · 2 pointsr/HelpMeFind

They are just about all cuttable - you just need a connector.

Try this one : https://smile.amazon.com/dp/B078VBVVMW

With this : https://smile.amazon.com/dp/B01HRMPDC8

u/BreakFromMonotony · 1 pointr/buildapc

You should be able to use LED extension cables, but I don't know how finicky the HUE system is with them.

Like this.

u/breadtangle · 106 pointsr/DIY

Links to the LED's and wire that I bought:

Music Led Strip Lights, TaoTronics Christmas Rope Lights Kit (300 Leds, RGB,20 Key, 16.4ft) 5050 RGB SMD Leds

[4 Color 12M 4 Pin RGB Extension Cable Line Wire For LED Strip RGB 5050 3528 Cord]
(https://www.amazon.com/EvZ-Color-Extension-Cable-Strip/dp/B00XFSNKXS/ref=sr_1_3?ie=UTF8&qid=1487516299&sr=8-3&keywords=4+Color+4+Pin+RGB)

*Edit, just noticed that the specific lights I bought are not available but These seem to be the same thing

u/AbysmalVixen · 1 pointr/pcmasterrace

Totally could. I personally have used these for inside my case and under my case. They work with my asus strix x370-f gaming mobo that has the 4-pin rgb header

solderless connectors for corners and extensions for gaps that didn’t need lights and where the corners wouldn’t work.

u/enoctis · 2 pointsr/DIY

Another idea. Need to have the lights far from the power source? Use this cable with these connectors. A slight bit of soldering (use heat shrink tubing around the solder joints) and you're in the game!

u/tanj92 · 1 pointr/Hue

No problem.

I was also looking at an alternative solution from another reddit post which would use the following items:

u/StyloV2 · 2 pointsr/AskBattlestations

Plain RGB strip? Just grab these jumpers or these corner connectors and cut the strip on the marks. Clip in the strip and bam, done.

Soldering: The led strip lights can be cut and and you can solder on some wire to make easy corners. I have a strip with whites in it so this is the wiring I ordered with mine. You would want wire for RGB strips (4 line) if you don't have and RGBW strip.

u/fry133 · 2 pointsr/AnimeFigures

I used this LED strip

The strip is 16 feet long, so i measured out a rectangle for the top of my case, and the front length of the case. I then cut the strip into sections so i could run the cable how i wanted.

I used these adapters to connect each of the sections i made

For the connection from the front left cable to the front right cable, i spliced one of the connectors with some white spare cable i bought, and ran it across the bottom of the case (seen in one of the pictures. Then i mounted everything with 3M mounting tape, which is highly recommended. Let me know if you have other questions, as I made some mistakes which cost me some length of LEDs but was overall not too hard.

u/zeta_cartel_CFO · 1 pointr/hometheater

Cool. How did you bend it around the corners? As a trial run, I tried a shorter trip around a wall mounted tv and it was a pain to get it to bend at the corners. Then saw a forum post about how they sell these 4-pin right-angle connectors that let you join strips after you cut them. According to some youtube videos I've seen, the strips seem easy to cut. There is a dotted-line every few inches. Then once you cut them, you insert it into the connectors and the pins will touch the copper dots where the strip was cut. Of course, I haven't done this yet. Just based on what I've seen. I guess, I'll soon find out :)

u/FunkoDude · 1 pointr/funkopop

Bought them from Amazon for less than $20. Also bought extra RGB wires that connect the cut stripes behind the shelves. Plus Silicon Clips incase the tape wears off.

Closer Image of Right shelf

u/kilogttam · 1 pointr/ebikes

LEDs. Cut them to size, string multiple strands together with some jumpers. I wrapped all my connections with weatherproof electrical tape.

u/caesartheday007 · 3 pointsr/halloween

Here are the components I got:

RGB LED Strip Lights Kit,BEILAI RGB LED Light Strip Waterproof SMD 5050 DC 12V Flexible Neon Tape 16.4 Ft (5M) 300leds with 44key Controller for Christmas Kitchen Party Indoor and Outdoor decoration https://www.amazon.com/dp/B01KSPR5GS/ref=cm_sw_r_cp_api_p6mWBbZ9XWQ7N

EvZ 22AWG 4pin LED Electric Wire 22 Gauge 33ft 10m Conductor Extension Cable Line Cord for RGB LED Strip 5050 3528 https://www.amazon.com/dp/B00DPQMKBS/ref=cm_sw_r_cp_api_r7mWBbSQEZB0T

EvZ 10PCS LED 5050 RGB Strip... https://www.amazon.com/dp/B01CMLLKHG?ref=yo_pop_ma_swf

12V DC Battery Pack, 6000 mAh... https://www.amazon.com/dp/B00U2PVX36?ref=yo_pop_ma_swf

And a bunch of male/female connectors - but I can’t find the link. Also make power connectors for the power bank.

Soldering was a pain because the led leads are so close together. Used a knitting ring in the hoodie opening to keep it stiff and hot glued the whole contraption onto some black sweats. No time this year but I want to play with Tron type costumes next year.

u/wr0ngway · 1 pointr/Multicopter

Sucks that I had to, but got tired of fumbling to plug in when on my head, so ordered this, should do the trick without having to mod an expensive piece of kit: https://www.amazon.com/dp/B01CWNMB86