Reddit mentions of Stanley 31610 SurgeMax Pro 9 Outlet Metal Surge Protector, Black

Honestly it's not as hard as you might think. Even my PC setup with a standing desk has 1 cable. Just a few dollars on amazon and about 15 minutes of time and here are both setups: https://imgur.com/a/HnUZotv

​

Cable tray: https://www.amazon.com/Monoprice-Under-Desk-Cable-Tray/dp/B07H48SY8G/ref=sr_1_9?keywords=cable+tray&qid=1569203550&s=gateway&sr=8-9

Clips: https://www.amazon.com/gp/product/B075Y9J42T/ref=ppx_yo_dt_b_asin_title_o07_s00?ie=UTF8&psc=1

Strip Cord: https://www.amazon.com/gp/product/B0036DEC48/ref=ppx_yo_dt_b_asin_title_o09_s02?ie=UTF8&psc=1

Here's two things I use that really helped mine out

Cable raceway and one of these

I just ordered this power strip from Amazon. The reason I picked it up is because it spaces the sockets far enough apart to plug the large power bricks in. There were a few other similar options, but this was appeared to be the best value. If you go another route, just make sure it has a breaker switch.

Now, I would be very wary of cheaping-out when it comes to electricity. I considered picking up the short extension cables first, but they seemed like they were going to be very cheap and I would have been nervous about plugging all my consoles into them.

So my thinking was, for less than $10 more, I could get a much higher quality product from a prominent North American tool manufacturer, and it would be properly/officially certified.

Couple that with a 4ft power strip fixed under the desk and you are set.

Edit: spelling

I bought one if these and I love it. All the outlets are really spaced apart so you can plug anything in side by side. I also use a regular Ikea Powe bar for the little plugs so I'm not wasting real estate.

https://www.amazon.ca/gp/aw/d/B0036DEC48/ref=yo_ii_img?ie=UTF8&psc=1

Two Alex drawers, two back to back Eket cabinets in the middle, and two of these table tops.

https://www.staples.ca/products/2949834-en-winsome-kenner-modular-desktable-top-reclaimed-wood-18058

Two of these mounted underneath.

https://www.amazon.ca/gp/aw/d/B0036DEC48?psc=1&ref=ppx_pop_mob_b_asin_title

I wanted to share a couple pictures of the desk set up and also some of the accessories I purchased. My expirience with Fully was great. I got the Jarvis3 with Walnut veneer in a72x60 size. The frame was delivered about 3 days later and the desk top about a week after purchase. The quality is everything I expected! This thing is heavy and stable at all heights. I love this desk!

Pics:
https://drive.google.com/file/d/1E7Vi_PN-sxrfnujw9ZgXZTnQwUT8dTyeLA/view?usp=sharing

https://drive.google.com/file/d/1LBK9sdiy9oULc-dOgY7ElnAcd45jkCCloQ/view?usp=sharing

https://drive.google.com/file/d/1L56J3IP3A9cVEiPSgyNNANwCjJIY4P3blA/view?usp=sharing

https://drive.google.com/file/d/1N0TaD-U1OJlcw7mq8sihXH_obmELsdRv6A/view?usp=sharing

https://drive.google.com/file/d/1Mw-c-78JU_MAIraOlL56jLZuFK-l0lQMDA/view?usp=sharing

Accessories
I decided to get the keyboard tray and accessories from Amazon. The keyboard tray is probably going back because it is difficult to move back and forth.
Keyboard Tray Here: https://www.amazon.com/gp/product/B01M2319VR/ref=oh_aui_detailpage_o03_s01?ie=UTF8&psc=1

The Anchor: https://www.amazon.com/gp/product/B00P31BMHG/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1

Wiretamers: https://www.amazon.com/gp/product/B01BVYW7UY/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1

VESA adapter for old Samsung Monitor: https://www.amazon.com/gp/product/B071YFDQKS/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1

Dual Monitor Mount: https://www.amazon.com/gp/product/B018MSDG84/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1

Clips for wire management: https://www.amazon.com/gp/product/B071L91LBH/ref=oh_aui_detailpage_o03_s02?ie=UTF8&psc=1

Long Power strip: https://www.amazon.com/gp/product/B0036DEC48/ref=oh_aui_detailpage_o03_s03?ie=UTF8&psc=1

Yeah, sorry, I bought mine at a local small hardware store so I don't remember the brand. It looks almost exactly like this Stanley model though.

I have a power strip like this mounted to the back of the table top which I find very useful, but our needs may vary.

The power strip? I just screwed it in with some .75in screws. The one I got has mounting holes.

Dude 100% recommended this: https://smile.amazon.com/Stanley-31610-SurgeMax-Outlet-Protector/dp/B0036DEC48/ref=pd_nav_hcs_bia_t_1?_encoding=UTF8&psc=1&refRID=RS0QX4EM7E47BD5GNFJM



just mount it under your desk and BOOM, no power cable problems!!

About to finish my first ever build. After seeing this post I just ordered one of these

https://www.amazon.com/gp/aw/d/B0036DEC48

Not too expensive and it seems to fit OP’s criteria. So sorry for your situation OP.