#14 in Vanity lighting fixtures
Use arrows to jump to the previous/next product
Reddit mentions of Thomas Lighting Sl7402-78 Four-Light Bath Fixture, Brushed Nickel
Sentiment score: 1
Reddit mentions: 1
We found 1 Reddit mentions of Thomas Lighting Sl7402-78 Four-Light Bath Fixture, Brushed Nickel. Here are the top ones.
Buying options
View on Amazon.comor
- brushed nickel finish, no glass only bulbs (not included) and backplate
- height from center of outlet box 2 1/8 inches
- 4 1/4 h x 24 w x 2 1/8 ext
- 4 light 100w med base bulb required not included
- Linear vanity lighting fixtures should generally be at least 24 inches wide based on the size of your vanity sink; and the middle of the fixture should be approximately 75 to 82 inches from the floor, or at least 6 to 8 inches from the ceiling. Allow for 3 inches between the top of the mirror and the bottom of the light fixture for optimal lighting. When installing 1 or 2 light vanity sconces in bathroom applications that flank a mirror, allow for about 4 inches of space on either side of the mirror, and the center of the light to be hung roughly 66 inches (or slightly below eye level) above the room's finished floor. The minimum height suggestion of 66 inches is also suitable as a guideline for applications throughout the bathroom or home.
Features:
Specs:
Color | Brushed Nickel |
Height | 4.25 Inches |
Length | 2.25 Inches |
Number of items | 1 |
Size | 1 Pack |
Weight | 2 Pounds |
Width | 24 Inches |
Most of the custom work was the mirror/lighted section, I bought a used vanity itself off craigslist and modified it..
I don't have a before picture of the craigslist vanity I bought, but This was the original style vanity for those curious as to what table we had (with the mirror that lifts up in the middle... we sealed that off to put the box on top)
After we sealed the lift up top piece down, we built a working drawer in the center where the front fake drawer was. It was originally a finished stain from the person I bought off craigslist, so I sanded it down and primed/painted everything a gloss white, and put acrylic cabinet knobs on the drawers.
The seat was also painted white, and we made a new seat cover out of a giraffe print shirt. Just wrapped and stapled it down over the older seat cover.
For the light/mirror section...
Then we mounted it using two long bolts with wing nuts to make it removeable for moving. You can see them in this picture
Feel free to ask any questions!!