Reddit mentions of Vallejo Face/Skin Colors Paint Set, 8-Colors, 17ml

Eh, I personally recommend not buying bundles even-though they seem like a better deal. I started by just buying paints that I would need for a particular model and continuing from there. Before I knew it I had a full range of paint from all different companies.

Buying a set of paints will only save you a little cash, but I'd bet that the big sets will include paints you will never really touch so you aren't actually saving any money buying them.

If you really want to go the paint route on Amazon then I will admit that I did in fact buy these sets when I was starting painting on a set of Zombicide minis:

https://www.amazon.com/dp/B004EKCOE2/ref=sr_ph_1?ie=UTF8&qid=1487690557&sr=sr-1&keywords=vallejo+paint

https://www.amazon.com/Vallejo-Face-Colors-Paint-8-Colors/dp/B000PHCPTM/ref=sr_1_1?ie=UTF8&qid=1487690721&sr=8-1&keywords=vallejo+paint+flesh

For my figures flesh tones I use Games Workshop’s Citadel Kislev Flesh which works VERY well with their Cadian Fleshtone.

I've been eyeing Vallejo's Face/Skin Colors Paint Set for awhile. It's 8 colors that'll help add a bit of variety. Amazon Link

Thanks, for flesh tones I'm mainly using Vallejo's flesh tone pack.

This was hand brushed. I felt that I would fork out for an airbrush down the line if I was serious about picking up the hobby. Originally I planned to use some Mr Hobby colours I got off Ebay. Unfortunately I realised too late that most of the colours I had purchased were gloss and I read that they don't do well for parts that are not meant to be glossy! I then settled on some Vallejo Model colors off Amazon, this and this set. In my very limited experience they seem quite easy to work with, water based, easy to thin down and apply.

What putty would you suggest using? I tried using some Milliput Epoxy putty and a bit of vaseline so the parts wouldn't stick together, but I found that I was either not mixing it in the right proportions so it wouldn't set or that it still stuck the parts together despite using vaseline.

https://www.amazon.com/Vallejo-Face-Colors-Paint-8-Colors/dp/B000PHCPTM/ref=sr_1_10?keywords=flesh+tone+acrylic&qid=1568523918&sr=8-10

You're welcome! I appreciate that you're open to suggestions - it's easy to get attached to a plan. Since you seemed receptive I'm going to elaborate:

I ordered KD:M and then this Vallejo flesh tone set and this Vallejo basic colors set, which got me going. Like I said, i had to supplement with a lot of citadel paints from my LGS that ended up being frustrating, so I wish I had gotten some more saturated base colors in the beginning, maybe something like this, that comes with purples and oranges.

I was looking at the are these a good set to start with. https://www.amazon.com/gp/aw/d/B000PHCPTM/ref=ox_sc_act_image_3?smid=ATVPDKIKX0DER&psc=1

I dont know what colors GW would have used, but the Vallejo face/skin tone set has a few options that should work, I've tried a couple of the darker tones on my Star Wars Legion rebels to good effect. Link is a bit long below, I'm on mobile and in a hurry so it's the first link I could find.

https://www.amazon.com/Vallejo-Face-Colors-Paint-8-Colors/dp/B000PHCPTM/ref=asc_df_B000PHCPTM/?tag=hyprod-20&linkCode=df0&hvadid=309765208504&hvpos=1o1&hvnetw=g&hvrand=10430058833642169688&hvpone=&hvptwo=&hvqmt=&hvdev=m&hvdvcmdl=&hvlocint=&hvlocphy=9023889&hvtargid=aud-801381245258:pla-436757734711&psc=1&tag=&ref=&adgrpid=60439471103&hvpone=&hvptwo=&hvadid=309765208504&hvpos=1o1&hvnetw=g&hvrand=10430058833642169688&hvqmt=&hvdev=m&hvdvcmdl=&hvlocint=&hvlocphy=9023889&hvtargid=aud-801381245258:pla-436757734711