#7,795 in Electronics
Reddit mentions of NEWSTYLE 12v 30a Dc Universal Regulated Switching Power Supply 360w for CCTV, Radio, Computer Project
Sentiment score: 4
Reddit mentions: 7
We found 7 Reddit mentions of NEWSTYLE 12v 30a Dc Universal Regulated Switching Power Supply 360w for CCTV, Radio, Computer Project. Here are the top ones.
Buying options
View on Amazon.comor
High quality Switch Power Supply Widely used in Industrial automation, LED display, communications, etc.You can choose the input voltage (110V/240V) by switch.Smart device surge protection for Shortage Protection, Overload Protection, Over Voltage ProtectionIN-DOOR USE ONLY!
Specs:
This is what you want. I have the same thing to power my ISDT 300W its super easy to set up. Buy a power cord too!
https://www.amazon.com/gp/product/B00MAC9MO6/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1
This is kind of a neat idea. The biggest problem you face is that 250W @ 12V = 21A.
So you would need (at peak power), a 21A (or 30A with a safety margin) power supply. Something like this: https://www.amazon.ca/NEWSTYLE-Universal-Regulated-Switching-Computer/dp/B00MAC9MO6/ref=sr_1_3?ie=UTF8&qid=1536439139&sr=8-3&keywords=12v+30A
It's important to get a good power supply as well, as crappy ones will introduce hums and other unwanted noise into your system.
Don't forget to size the wires accordingly as well for 30A. There's a reason car audio has such thick wires. If you were using 120V then you only need 2.2A
http://www.hotwirefoamcutterinfo.com/Introduction_files/Ampacity.jpg
You can indeed use a computer power supply as a cheap way of getting 12V. You will have to do some tricks to make the power supply thinks there's a computer hooked up to it, but there are guides. There are even kits.
Or you can just buy a 12V power supply. The instruction manual says the amp draws 33 amps max, so a 12V 30A supply is probably good and it's the same price as the kit for converting an ATX supply.
Do be careful hooking things up, though, for safety and equipment protection reasons.
As for audio connections, if the receiver has a dedicated sub output, I'd use that.
Agreeded, here is a power supply that I have used to light strips it works pretty well.
This
https://www.amazon.com/gp/aw/d/B00MAC9MO6?psc=1&ref=yo_pop_mb_yo_pop_mb_pd_t2
And I cut the female end off this
https://www.amazon.com/gp/aw/d/B01EYDGO12?psc=1&ref=yo_pop_mb_yo_pop_mb_pd_t2
Been buying these Chinese switching supplies off Amazon for about $20...20-30 AMP and using them on almost all my home based VHF/UHF gear and even running a HF station with one...they are surprisingly quiet...just add power cord.
The quanums v2's can run on 2s lipos, so any cheap 2s lipo in the 500mah+ should do the trick. These nano-techs 850mah 2s works well and gives decent power time.
For charging, I personally like the Turnigy Reaktor it can do 10A, plus this 12v power supply and a parallel charging board, you can quickly charge 4 or 5 lipos at once. In the future if you plan to get another Reaktor charger, you can hook it up to the same power supply. I have 3 Reaktors hooked up to my power supply.
On a cheaper end, this B6AC can do 6A and doesn't require a separate power supply.
This is what my setup looks like.