#180 in Camera accessories
Reddit mentions of Sescom LN2MIC-TASDR100 3.5 Line to Mic 35dB Attenuation 9" DSLR Cable for Tascam DR-100
Sentiment score: 4
Reddit mentions: 5
We found 5 Reddit mentions of Sescom LN2MIC-TASDR100 3.5 Line to Mic 35dB Attenuation 9" DSLR Cable for Tascam DR-100. Here are the top ones.
or
Sescom Line Out to Camera Mic Level In Cable for the Tascam DR-100.New specialty cable products that solve interface problems with todays Canon, Nikon, Pentex and Panasonic DSLR setups.Many professional DSLR cameras have unbalanced stereo mic level audio inputs on a mini TRS 3.5mm jack.Manufacturers do this to save valuable space in the camera interface.With the age of professional pocket recorders that can produce very high quality sound, such as the the Sony PCMD50 or a Samson Zoom H4N, came devices that output different line level audio signals.To avoid using klunky XLR type attenuators that can produce heavy strain on the cameras mic input connector, these little cables will provide the proper mic levels and preserve the delicate connector contacts inside your expensive camera.This cable features a -35dB L Pad attenuator on audio channels to reduce Professional Line Level output (+4dBu) to the camera mic input sweet spot level.The cable is designed with the proper impedances to assure maximum voltage transfer and low noise operation.
Specs:
| Height | 1.4 Inches |
| Length | 5.8 Inches |
| Weight | 0.1 Pounds |
| Width | 3.9 Inches |
I would avoid connecting your mic directly to your DSLR. It will be difficult to record clean audio directly to your camera because of its noisy preamps.
For multi-person interviews, I would get a [set of two battery powered Movo LV20 lavaliers with 20' of cable for $39.95] (http://www.amazon.com/gp/product/B015GEH5KC/ref=as_li_tl?ie=UTF8&camp=1789&creative=390957&creativeASIN=B015GEH5KC&linkCode=as2&tag=battleforthew-20), plug them into an [$84.50 Tascam DR-05 recorder] (http://www.amazon.com/gp/product/B004OU2IQG/ref=as_li_tl?ie=UTF8&camp=1789&creative=390957&creativeASIN=B004OU2IQG&linkCode=as2&tag=battleforthew-20), mount the recorder on your camera with an [$8.99 hot shoe mount adapter] (http://www.amazon.com/gp/product/B000CNPK3M/ref=as_li_tl?ie=UTF8&camp=1789&creative=390957&creativeASIN=B000CNPK3M&linkCode=as2&tag=battleforthew-20) and connect the recorder's line output to your camera's mic input with a [$29.95 Sescom LN2MIC-TASDR100 line matching cable] (http://www.amazon.com/gp/product/B004YUAGFG/ref=as_li_tl?ie=UTF8&camp=1789&creative=390957&creativeASIN=B004YUAGFG&linkCode=as2&tag=battleforthew-20) [Referral Links].
This will take you $13.39 over your $150 budget, but will allow you to record a high quality track to the recorder and a safety track to your camera. It will also make your life a lot easier when it comes time to synchronize the recorder's sound track to your video. You should be able to match the waveforms from the camera and the recorder by eye.
I use a similar dual-recording setup with my Zoom H1 (shown [here] (https://photos.google.com/share/AF1QipOJ4bT9tvapzNAkhJMIyomMnTijDLrsmTNq_BeKB6GfnVKeXpF-lvnpJvXAw5lGKw/photo/AF1QipMxwfwkcOr535-Uev4yGXFd9xXTQYueA7EFfDQU?key=NmkzazFJdWc3ZS1LUFhDMExBeEZWcUZnZlFMc2hR) and [here with my Tascam DR-60D] (https://photos.google.com/share/AF1QipN5J7K-tGnH0-rIWN0pP37r6ZjNIa73D6RAd3KmSnQKt0B3he2-ccuO0liECNLA9w/photo/AF1QipPBoJ06Mzb5s2IdVoRJLUCUxwGAT_39ao-DiARR?key=MllJcWR3aHE4Y1BzR0hGUkJlMl9BU1ZvWE53SlhB)). It works.
/u/JelloSlapper is right, a shotgun would be preferable, but I don't think you have the budget for a decent one (plus, you would need a boom and someone to swing it).
Hope this is helpful, good luck upgrading your audio and Happy New Year!
different mixers output their LINE OUT or HEADPHONE OUT at different levels. You gotta check 'em before just leaving them there. If they run too hot you gotta use an attenuator like this one:
https://www.amazon.com/gp/product/B004YUAGFG/ref=oh_aui_search_detailpage?ie=UTF8&psc=1
I use it and it works great.
I honestly have a headache from searching for the most suitable sound recording setup... Would appreciate some help.
Let's say I have bought the dr-40 along with a shotgun mic and the boom pole and I need to record audio away from the camera, Do I set it up so the shotgun mic is at one end of the pole and the recorder is in my pocket for example (connected through the cable of course) ?
You're sending line level audio to a mic level input, which is causing your issue. If money is no object use one of these
Hi /u/snapbackchinos - if you want clean, noise-free audio you'll get better results with an external recorder and a pro mic.
At your price point, I recommend the [$150 Azden SGM-P II] (http://www.amazon.com/gp/product/B0071H6UBI/ref=as_li_tl?ie=UTF8&camp=1789&creative=390957&creativeASIN=B0071H6UBI&linkCode=as2&tag=battleforthew-20) with balanced pro XLR output and a [$150 open box Tascam DR-40 recorder] (http://rover.ebay.com/rover/1/711-53200-19255-0/1?icep_ff3=2&pub=5575034783&toolid=10001&campid=5337235943&customid=&icep_item=171558578367&ipn=psmain&icep_vectorid=229466&kwid=902099&mtid=824&kw=lg) with XLR inputs and phantom power for the mic.
You'll need a couple of cables (one to [connect the mic to the recorder] (http://www.adorama.com/HOXFF1015.html?KBID=66297) - the other to [connect the recorder to your camera] (http://www.amazon.com/gp/product/B004YUAGFG/ref=as_li_tl?ie=UTF8&camp=1789&creative=390957&creativeASIN=B004YUAGFG&linkCode=as2&tag=battleforthew-20), if you want a backup track) - but this setup will give you pro quality sound within your budget.
[Here] (https://lh4.googleusercontent.com/-N2fhpkBqQyA/UlAwzPz9p8I/AAAAAAAAIKA/Cr572sFRSW8/w724-h543-no/P1120289.JPG)'s a picture of the DR-40 mounted on my camera with a used pro XLR mic I bought for $75 on eBay. This setup produces very clean sound.
Good luck!