Reddit mentions: The best aquarium water pump accessories
We found 35 Reddit comments discussing the best aquarium water pump accessories. We ran sentiment analysis on each of these comments to determine how redditors feel about different products. We found 22 products and ranked them based on the amount of positive reactions they received. Here are the top 20.
1. Two Little Fishies ATL5445W Ball Valve for Regulating Water Flow, 1/2-Inch
- Two Little Fishies Ball Valve
- Barbed Aquatic Ball Valve for regulating water flow
- Used for devices such as canister filters, pump return lines, protein skimmers, calcium reactors, etc.
- Two Little Fishies Ball Valve
- Barbed Aquatic Ball Valve for regulating water flow
- Used for devices such as canister filters, pump return lines, protein skimmers, calcium reactors, etc.
- Used for devices such as canister filters, pump return lines, protein skimmers, calcium reactors, etc.
Features:
Specs:
Height | 0.02 Inches |
Length | 0.02 Inches |
Number of items | 1 |
Size | 1-(Pack) |
Weight | 0.02 Pounds |
Width | 0.02 Inches |
2. MarineLand Maxi-Jet 1200, Multi-Use Water Pump and Power Head, Fully Convertible
Three Pumps in OneTurns powerhead in to a prop style circulation pumpThe most fully adaptable pump availableModel Number: ML90512
Specs:
Color | -1 |
Height | 6.875 Inches |
Length | 4.75 Inches |
Number of items | 1 |
Size | 295/1300 gph |
Weight | 1.15 Pounds |
Width | 4 Inches |
3. Eshopps AEO19085 Float Valve for Aquarium Water Pump
- Combination feeding dish and water dish
- Made from durable materials
- Colored to look like natural rock
- Country Of Origin: United States
- Age range description: All ages
Features:
Specs:
Height | 1 Inches |
Length | 1 Inches |
Number of items | 1 |
Size | 1 Count (Pack of 1) |
Weight | 1 Pounds |
Width | 1 Inches |
4. SUN Aquarium Submersible Water Pump (420 GPH)
Budget-friendly magnetic drive pumps for most aquarium applicationsEnjoy versatile submersible use in fresh or saltwater aquariumsEnergy-efficient aquarium pumps boast quiet, reliable performanceAslo work for small ponds, water gardens and desktop water fountainsH-max: 8.9 ft, power: 45-watt, dimens...
Specs:
Height | 4 inches |
Length | 5 inches |
Size | 420 GPH |
Weight | 2 Pounds |
Width | 4 inches |
5. Eheim AEH4005943 Tubing 594 for Aquarium Water Pump, 10-Feet
Pre-cut 16/22mm plastic hosing for Eheim 2217/2260/2226/2228/2326/2328/2227/2229/2327/2329/2026/2028/2126/2128/2071/2073/2075/2080/2180/2074/2076/2078. Phenol and zinc free. 9.8 ft (3m)Orders for more than 1 meter would come as one continuous lengthComes in an attractive green colorCountry Of Origin...
Specs:
Color | GREEN |
Height | 1 Inches |
Length | 1 Inches |
Number of items | 1 |
Size | 1.00 x 1.00 x 1.00 inches |
Weight | 1 Pounds |
Width | 1 Inches |
6. Marineland Maxi-Jet 400, Multi-Use Water Pump And Power Head, Fully Convertible, 110/500 GPH
- 3 PUMPS IN 1: Marineland Maxi-Jet Multi-Use Water Pump acts as a power head, utility pump and circulation pump.
- MULTIPLE USES: Powers undergravel filters, protein skimmers, calcium reactors and refugiums.
- CONVERSION KIT: Turns the power head into a prop-style circulation pump.
- AERATION: Venturi pump allows for fully adjustable aeration.
- FOUR SIZES: Maxi-Jet 400 (110 to 500 GPH); 600 (160 to 750 GPH); 900 (230 to 1000 GPH); and 1200 (295 to 1300 GPH).
Features:
Specs:
Color | -1 |
Height | 6.875 Inches |
Length | 4.75 Inches |
Number of items | 1 |
Size | 110/500 gph |
Weight | 1.15 Pounds |
Width | 4 Inches |
7. DC 3.5V -9V 3W USB Submersible Water Pump Aquarium Fountain Pond Pump-simulate Natural Ocean / River Environment
Submersible water pump for aquarium, fountain, fish pond, etcFlow rate is adjustable with knob in front of the pumpWith 2 suction cups at the bottom and to be used in water onlyInput Voltage: DC 3.5V -9VPower: 3W
Specs:
Height | 1.5 Inches |
Length | 1.4 Inches |
Width | 1 Inches |
8. Python Brass Snap Connector for Aquarium
- Apparatus includes a male adapter/coupler that fits any standard faucet, and a female coupler that attaches to your No Spill Clean and Fill.
- Solid brass construction ensures durability and long-term use.
- Must be used in conjunction with the brass adapter included with your system (69HD) or the plastic faucet adapter (13A).
- Item Package Weight: 0.23
Features:
Specs:
Height | 1.02 Inches |
Length | 1.03 Inches |
Number of items | 1 |
Size | 1.02 x 1.02 x 1.03" |
Weight | 0.23 Pounds |
Width | 1.02 Inches |
9. Zacro Standard Airline Tubing Air Pump Accessories(Green)
- Air pumps accessories, perfect match to your fish
- 2m/78.7inch length, 0.2 inch tube diameter, easy to clean the airline tubing
- 2 pcs bubble release air stones and 2 pcs air valves, diffuses oxygen efficiently and smoothly in you
- Perfect match air pump accessories, safe for fish and good for fresh or salt water environments
- Tips: To prevent the water backflow and pump damage, the out port must connect to the air stones
Features:
Specs:
Height | 7.6 Inches |
Length | 5.3 Inches |
Weight | 0.25 Pounds |
Width | 0.3 Inches |
10. Rio Plus 600 PT Venturi Water Pump for Aquarium
- Enhanced Motor Design
- Intake Ventura
- Energy efficient
- Protein Skimmer Pump
- Co2 Plant Tank Injection
Features:
Specs:
Height | 1.75 Inches |
Length | 2.75 Inches |
Number of items | 1 |
Weight | 0.7 Pounds |
Width | 2.4 Inches |
11. Marineland Maxi-Jet 900, Multi-Use Water Pump And Power Head, Fully Convertible
- 3 PUMPS IN 1: Marineland Maxi-Jet Multi-Use Water Pump acts as a power head, utility pump and circulation pump.
- MULTIPLE USES: Powers undergravel filters, protein skimmers, calcium reactors and refugiums.
- CONVERSION KIT: Turns the power head into a prop-style circulation pump.
- AERATION: Venturi pump allows for fully adjustable aeration.
- FOUR SIZES: Maxi-Jet 400 (110 to 500 GPH); 600 (160 to 750 GPH); 900 (230 to 1000 GPH); and 1200 (295 to 1300 GPH).
Features:
Specs:
Color | -1 |
Height | 6.875 Inches |
Length | 4.75 Inches |
Number of items | 1 |
Size | 230/1000 gph |
Weight | 1.15 Pounds |
Width | 4 Inches |
12. Sun JVP-101A 6W 2-Unit 800 GPH Wave Maker with Suction Cup
- Totally submersible and oil-free motor to avoid pollution to the living circumstance
- 2 units - 793GPH flux and wide-spread range which is ideal for marine aquarium, high waterproof performance ensures safety and reliability
- Suction Cup with articulating ball joints for versatile directions, 360 degree rotation to allow full flow directions
- Extremely low energy consuming - requires 6 watt power, power: 110V/60Hz
- Easy to install - just suck the cupule to anywhere of the in-wall, plug in the power and it works
Features:
Specs:
Color | Black |
Height | 4.3 Inches |
Is adult product | 1 |
Length | 8.6 Inches |
Size | 800 GPH, 2 Pack |
Weight | 1 Pounds |
Width | 6 Inches |
13. Eheim 4005310 Spray Bar Set for 594 Tubing
- This product is easy to use
- This product adds a great Value
- This product is Manufactured in Germany
- Country Of Origin: Georgia
Features:
Specs:
Height | 7.5 Inches |
Length | 1 Inches |
Number of items | 1 |
Size | 594 5/8" ID |
Weight | 0.35 Pounds |
Width | 1 Inches |
14. Zacro Aquarium Fish Tank Cleaner for Changing Water Vacuum Water Filter Pump
- Sherpa-lined snap-front hooded jacket featuring snap-flap pockets at chest
- Side-entry on-seam pockets at hips
- Drawstring hood
Features:
15. Rio Plus 200 Aqua Pump/Powerhead - 138 Gallons per Hour, 6 Watts UL listed
Enhanced motor designVersatileQuiet and cool operationCeramic shaft and bearingsFully submersible
Specs:
Color | UL listed |
Height | 1.7 Inches |
Length | 2.5 Inches |
Number of items | 1 |
Weight | 1 Pounds |
Width | 2.3 Inches |
16. MistKing 22251 Starter Misting System V4.0 - PetOverstock,Black
- IMPROVED SYSTEM: 4th generation starter misting system features a basic design that acts as a starting point for customization
- UPGRADED TIMER: Easily runs up to 10 nozzles with ease; For running more nozzles, consider upgrading to the Ultimate or Advanced Misting Systems
- BETTER CONTROLLERS: 3 new controllers precisely run the misting system, letting you customize your system to control exactly how you need it
- INCLUDES: Misting pump, adapter, 1 Value L misting assembly, reservoir bulkhead, 15 feet of 1/4-inch tubing, ST-24 timer, 5 tubing clips, and manual
- VARIABLE APPLICATION: Built for multiple applications; Utilize the system for patio cooling, greenhouses, or terrarium habitats
Features:
Specs:
Color | Black |
Height | 7.62 Inches |
Length | 2.44 Inches |
Size | V4 Starter |
Weight | 2.44 Pounds |
Width | 2.44 Inches |
17. Aqueon Aquarium Springs Kit, 8.8 Gallon
Designed with your aquatic pets safety and health in mindMaterials designed in the USAQuality driven, Competitive Price and Ease of use with Aqueon
Specs:
Color | Black |
Height | 4 Inches |
Length | 5 Inches |
Size | 8.8 gallon |
Weight | 1 Pounds |
Width | 2 Inches |
18. Fluval A14652 Spec I&II Replacement Water Pump
- Fluval has been providing quality aquatic products at value pricing for years. Whether you have a beginner setup or even up to advanced seasoned aquatic experts, Fluval provides everything you need for quality, healthy aquatic environments.
- Made in the USA with quality materials
- Field tested to ensure nothing but the best for your pet
- Country Of Origin: United States
Features:
Specs:
Color | Black |
Height | 7 Inches |
Length | 12 Inches |
Number of items | 1 |
Width | 4 Inches |
19. AquaClear Powerhead 10 - 110 V, 80 Gallons per Hour
- Multifunctional pump that pumps 80 gallons per hour
- Stronger currents and consistent output over time
- Quick and easy installation with ability to be hidden in aquarium
- Silent operation; Powerhead lifts water as well as moves it
- Provides additional safe mechanical filtration
Features:
Specs:
Color | Black |
Height | 4 Inches |
Length | 4.5 Inches |
Number of items | 1 |
Weight | 0.9 Pounds |
Width | 2 Inches |
🎓 Reddit experts on aquarium water pump accessories
The comments and opinions expressed on this page are written exclusively by redditors. To provide you with the most relevant data, we sourced opinions from the most knowledgeable Reddit users based the total number of upvotes and downvotes received across comments on subreddits where aquarium water pump accessories are discussed. For your reference and for the sake of transparency, here are the specialists whose opinions mattered the most in our ranking.
To be perfectly frank this recipe doesn't make much sense as an all-grain at all. If anything it's a relative of UJSSM, where grains are being added just for flavor, and are giving no fermentable sugars at all. I don't offer that to be cruel, good AG recipes are hard to find, just to say that wherever you got this recipe, I wouldn't get any more AG recipes from their. Here are the issues:
You can solve this by grinding your corn. Cracked corn is truly godawful for sacch efficiency. Corn has the densest of all starch reserves for any grain, but it accomplishes that by having an incredibly organized and packed in starch reserve which cannot be pulled out lightly. I don't know why cracked corn is so ubiquitous in AG recipes, but that grind size is, without exaggeration, several hundred times larger than what is workable by enzymes and boiling water. Whiskey; Technology, Production, and Marketing has the numbers on grind size but if you need proof go buy a lb of cornmeal and make polenta. It's the exact same species of corn (dent) but finely ground. Cracked corn is likely so popular because its cheap (less than 10 for a 50 lb bag at any feed store) and seemingly ungrindable (no brew store will ever grind corn for you because brew stores use either rolling or hammer mills which crush, and corn don't like being crushed--I know microdistillers that can't grind their own corn because they are former brewers and accidentally bought a fancy rolling mill instead of plate or stone mills). Rest assured you can easily hand grind corn with something like this. It's labor intensive but that exact mill lasted me 3 years of hand-ground 50 gallon ferments.
You can absolutely boil that corn, but it's not necessary, 190 strike water is fine IF your corn is ground. Neither boiling directly or striking are going to get you a real appreciable amount of corn sugar.
Sidenote: iodine should completely disappear with a good conversion. You should be able to add the recommended amount (everything will turn purple but not black) then shake for 30s at which point it should become such a light red as to be barely perceivable from the original color.
That being said you still need to bring temp down smoothly and evenly (I strike, give it maybe 15, then cool to temp in about 30 minutes). 2 hours is too long even with the above technique. This pump plus a little 1/4 inch copper coil is perfect for the job (I love these pumps, I use these little 15 dollar chinese pumps in my micrdistillert more than I do my "professional" microbrew chugger--which is an unmitigated piece of shit).
This brings us to the last piece of the bad conversion puzzle. Your instinct to add backset in during boil is right, in fact that pretty much the obly reason to add backset. You need to adjust ph down to 5.5 at room temp. 7 won't kill your enzymes (because they aren't alive) but it will slow them down, and between temp and the relatively low amount of barley you're using, they beed all the speed they can get. Get a good digital meter, strips are way too inaccurate.
A good conversion will have the texture of flat soda (and you can easily get 1.05-06 just with grain). The kind of thing that isn't thick at all but if spilled will obviously quickly turn movie-theater-floor sticky.
Finally about equipment. A 10 gal pot is absolutely fine for cooking whiskey. You can get a big mash tun but it's going to extremely expensive for any size that's beneficial. You're much better off just doing batches and consolidating then in a big fermentor (and yes the trash can thing is disheartening, but unfortunately distilling is rapidly rising in popularity so a ton of people are trying to jump on the bandwagon and fleece people ready to start a new hobby).
You can just add boiling water into a big fermentor and add grain but 1) you need all the boiling water all at once, you can't be cooling and then reheating, 2) you'll need to add some commercial alpha at grain pitch (the corn will clump otherwise), and 3) you should ferment on grain to make up for some list efficicency.
The absolutely most efficient highest yield method that a homedistiller can do is boil the corn in the water for 2 hours (use a grain bag and false bottoms can be cheaply made), squeeze out the grain after conversion, then add 170f degree water back into the spent grain, squeeze out the grain again and then ADD THE GRAIN TO THE FERMENTOR (I have tested it and squeezing the grain a second time but still adding the grain to the ferment does in fact produce a marginal improvement in yield over both 2 squeezes no grain and one squeeze, 170f water, no secind squeeze and ferment on grain). But there is always a point of diminishing returns, like I said a 200f strike is plently efficient to be economical and while I could drive another 10% out, corn is much less expensive than time.
I like to end posts like this with shots of my tanks. I do this because I just want to remind you 1 more time that my first 5 gallon tank was an absolute death trap for any fish that was unfortunate enough to land in it. I hope this helps!!!
Distilling water is the exact same process as ethanol just a bit higher temps. The pump should sit inside the bucket and the tube should connect to the bottom most port. The top port on your condenser will be where the water flows out, I personally put this tube back into the bucket as to create a looping system. It saves on water and 5gallons should cool your pot enough for a single run. By the end of a run the water in the bucket will usually be around bath temps so it's good to change this out if your doing multiple runs in a day. A valve isn't some complicated device lol, it just slows the stream of water or can shut it off completely while the pump is still running. This valve is cheap and does a great job.The valve is nessisary with this pump as the condenser bucket will overflow at max speed and as such I turn the valve half way till the water is constantly leaving the top port without flowing over the port hole it self. The pump I listed is a bit overkill but it leaves much flexibility for the future. It can pump up high distances such as the distance from the floor to the pot, and it can be used with any size still should you ever upgrade. If you have any more questions, feel free to ask. I periodically check my Reddit so when I do I can help ya out.
I highly recommend getting a set of quick disconnects for your sink connection. Over time, it's easy to cross thread the plastic which will cause leaks, especially since you'll be connecting and disconnecting pretty frequently.
Something like this: https://www.amazon.com/Python-Brass-Snap-Connector-Aquarium/dp/B001EUI01G
I've been using one of these: http://www.amazon.com/Eshopps-AEO19085-Float-Valve-Aquarium/dp/B00BUFV2GK/ref=sr_1_14?ie=UTF8&qid=1454118087&sr=8-14&keywords=float+valve
Pricier than a regular float valve, but super useful if you routinely fill several different containers.
Absolute cheapest way to get up and running is a $10 tank at Petco's dollar-per-gallon sale. You'll pay a lot more for a smaller tank, honestly.
5-10 lbs of rock for a scape will cost you around $10-20.
You can buy substrate or you can go without. Bare bottom actually makes it easier to keep the tank clean, although it affects the aesthetics, of course.
You can get a cheap powerhead for $10-15, although a better powerhead is less likely to fail on you...but it'll cost you closer to $25.
That puts you at $55 already, without lights.
I'm not really sure what you need there, to be honest. My "cheap" LEDs cost near $200, but I'm growing some higher light corals. If you stuck to low-light (mushrooms and zoanthids/palys) type stuff, you could get by with a lot less output.
Hopefully someone else can help you with an economy lighting option.
Here's some things I think you can do:
Once you have that done, reply to this message and I'll see if I can help you further.
By air pump you mean like one used to inflate basketballs and tires? Found this tubing and air stone on amazon - is this what you meant? Just hook up the pump to the tubing and pump air in?
So the carbon filter is ok at 4inches but I definitely need a six inch fan? Did I understand that correctly?
I dont think you need to add oxygenation of the water if you are doing aeroponics. if you are misting the roots of the plants, you are going to get water dropping from the roots to the water creating both surface agitation and bubbles. Plus you may even get parts of the roots that are suspended in the air that are not being hit by water that will absorb your oxygen.
I know that does not answer the question, but if I was doing aeroponics, I would not worry about it. If you want to add a pump to your reservoir to get both bubbles and surface agitation, use a venturi style pump. This does a oxygen/water mix that a lot of people use for Koi ponds to keep the fish alive. Think of a hot tub jet. You get a blast of bubbles and water spraying. They use a Venturi style system I think in all hot tubs.
Here is one on Amazon for $23.00 with free shipping for Prime members.
EDIT: to remove Affiliate link. I'm not trying to sell you anything, I just stay logged into amazon by default.
Equipment List
____
Chemicals and Food
____
OnePlus 2 Manual Camera Settings
For those interested my light is an AI Prime LED set to the 14k spectrum.
Oops, it was actually $50 for 40 lbs of rock.
https://www.amazon.com/gp/product/B00F8DVAO4/ref=oh_aui_detailpage_o04_s01?ie=UTF8&psc=1
Here's the powerhead i got:
https://www.amazon.com/SunSun-JVP-101A-2-unit-Maker-Suction/dp/B00DY9ZAFO/ref=sr_1_1?ie=UTF8&qid=1480355284&sr=8-1&keywords=saltwater+powerhead
I'm not too familiar with a sump.
can you help pick out some parts for what i'd need because I'd be interested in doing less frequent water changes if at all possible.
also can an overflow be an alternative to a sump?
https://www.amazon.com/Eshopps-PF300-Overflow-Aquariums-75-Gallons/dp/B00CJ2575K/ref=pd_bxgy_199_img_3?_encoding=UTF8&pd_rd_i=B00CJ2575K&pd_rd_r=S89NJCB19GMJX2XNXY57&pd_rd_w=jEUDa&pd_rd_wg=N19XF&psc=1&refRID=S89NJCB19GMJX2XNXY57
Also i found this sump that has good reviews... i just don't know what other parts i'd need with it to make it work
https://www.amazon.com/Aqueon-34500-ProFlex-Model-44-55-Gallon/dp/B0036S1FQG/ref=sr_1_1?ie=UTF8&qid=1480355334&sr=8-1&keywords=saltwater+sump
http://www.amazon.com/Marineland-ML90512-Maxi-Jet-1200-1300GPH/dp/B004IMPOJ8/ref=sr_1_1?ie=UTF8&qid=1422575961&sr=8-1&keywords=maxi-jet
Much more powerful, I used to use it for changing water, now I run a dedicated water feed and drain line to my tanks.
I did not use any clamps.
This is the tubing
Eheim AEH4005943 Tubing 594 for Aquarium Water Pump, 10-Feet https://www.amazon.com/dp/B00BUFTQW2/ref=cm_sw_r_cp_apap_wi4iTmaGWn7oR
This is the heater
ISTA I-H614 150W Inline External... https://www.amazon.com/dp/B01MSFFTET?ref=ppx_pop_mob_ap_share
It is definitely nice not having the heater inside the tank.
Maxijet. Buy them online though, they're sold at complete rip off prices in stores. I saw a Maxijet 1200 at Petsmart on CLEARANCE for $42. Amazon sells them for $17.99.
I have a maxijet, it's quiet and has really good flow. I only use it as a powerhead though, there are a bunch of attachments you can use to make it a circulation pump, or utility pump. As a circulation pump it's garbage, way too loud.
Thanks. I'll just buy some hose and some hose clamps... Seems like there will be less failure points that way.
You like your fluval canisters?
This + this+ this. I use this setup and it works perfect for me.
What kind of filter are you using? There's all manner of kits available on Amazon.
I would be tempted to run two filters and feed into one joined spray bar. Sponge filters on the intakes will help keep the spray bars from being plugged.
I have 1 adult RES in a 55 gallon tank with about 40 gallons of water.
Zacro Aquarium Fish Tank Cleaner for Changing Water
This is what I've been using for years. Cheap and works. I use a 5 gallon bucket for emptying and refilling in increments. I pour the waste water down the toilet, and fill in the tub. I use ReptiSafe to condition the water before adding it back (inactivates chlorine).
No lugging the tank anywhere. No substrate to trap waste.
I recently invested in a Cascade 1000 canister filter and that has really helped keep the water clear for much longer intervals. It was about $100 but now I only have to do partial water changes once every two weeks, and I try to clean the filter every month and change the media on schedule. Much less work and totally worth the investment.
The side opposite of the plug wire is a removable cap. Take the cap off and take out impeller. clean both then reassemble and test to see if it works.
I would get a maxi jet pump if looking for a cheap upgrade.
MarineLand Maxi-Jet 1200 Pro Pump for Aquariums 3 in 1, 295/1300 GPH https://www.amazon.com/dp/B004IMPOJ8/ref=cm_sw_r_cp_apa_i_0y0PDb2E2NJKJ
You're going to want something more like this.
The one you linked won't have good head height.
Didnt get a aqua clear 70 I got a Pen-Plax cascade 100. Size wise I think its smaller but it looks like it will do the job. I just added about 9 gallons of water the powerhead filter and heater, salted the water and am sitting at 1.025sg. Ill add the sand as soon as temp comes up a bit. Then rock in the next couple of days.
Current Setup.
10g Tetra Tank from wal mart w led hood.
Cascade Pen Plax 100 pump.
Cascade Heater 20g
Rio 200
Carib Sea live sand 20lb
Instant Ocean Salt
Im probably going to upgrade the rio to a Koralia of some kind.
I am working a similar problem to activate a pump to fill a tank. Two aquarium float switches and a relay should do it.
Here's the thread I started; a lot of the comments are relevant to you. I'm still wrapping my brain around relays so someone else will have to help you for that.
https://www.reddit.com/r/maker/comments/85g1at/float_switch_level_control_for_a_pump_wiring_help/
A little pond pump like this would probably do the job.
https://www.amazon.com/Submersible-Aquarium-Fountain-Pump-simulate-Environment/dp/B008OCZUK6
Depending on the size of the enclosure will depend on the mist nozzle coverage. I have one pump for a dart frog viv and uses three nozzles, it is a 36x24x24. I also have one pump for two Chameleon set ups for my wife which are 4' X 4" x 3" with 4 nozzles each but does not require such high humidity.
I would say Mistking is the way to go. A little expensive but worth the money. https://www.joshsfrogs.com/mistking-starter-misting-system.html
https://smile.amazon.com/MistKing-22251-Starter-Misting-System/dp/B012IAK4SC/ref=sr_1_1?ie=UTF8&qid=1519816321&sr=8-1&keywords=mistking
It's an aqueon. It's like, circular and has a hole for a plant in the middle and it hooks on the back of the tank and there's a circular cut out in the lid for it too. I'll see if I can find a link
Edit: this is exactly what I have except I have a real plant in there. https://www.amazon.com/Aqueon-Aquarium-Springs-Kit-gallon/dp/B00ZXAM32A
I have this http://www.amazon.com/Fluval-Spec-Rplacement-Water-Pump/dp/B00DV66CB6/ref=sr_1_4?ie=UTF8&qid=1415215106&sr=8-4&keywords=fluval+spec+v+pump
This is plugged into the wall. I want this pump to turn on and off every 2-3 seconds to simulate a wave motion in my fish tank. I've looked at timer adapters, but their fastest interval is 1 minute. I need something in between the pump and the wall socket to control the 2-3second interval.
I saw that in a King of DIY video.
The valve that broke the inline one near the gravel vac. I took a chance and ordered this from Amazon:
http://www.amazon.com/gp/product/B000255NV4
I'm hoping it fits.
Also, got this:
http://www.amazon.com/gp/product/B001EUI01G
If they don't fit, I guess I am buying a Python to replace the Tetra.
You could use any sort of pump, dosent necessarily need to be a filter. I used one of these for a few days while I was waiting for the extra fluval fittings I needed to come in. You just need to be able to move water through the reactor.
40 GPH:
https://www.amazon.ca/KollerCraft-TOM-Power-Head-40/dp/B00176MP4K/
80 GPH:
https://www.amazon.ca/AquaClear-Powerhead-10-Gallons-Hour/dp/B0002DHMYM
That doesn't make much sense to me honestly. You might as well just do frequent water changes. Or just order a UV sterilizer.
COODIA Internal Green Water Killer Filter Aquarium Tank U-V Light Submersible Disinfection Pump https://www.amazon.com/dp/B07V26V5MS/ref=cm_sw_r_cp_apa_i_7odqDb3JJ4AYK