Reddit mentions: The best finger toy skateboards
We found 15 Reddit comments discussing the best finger toy skateboards. We ran sentiment analysis on each of these comments to determine how redditors feel about different products. We found 11 products and ranked them based on the amount of positive reactions they received. Here are the top 20.
1. SkateHoarding Skateboard Wall Hanger Mount Rack Display
- Supreme Quality Skateboard Wall Hanger Display Mount (read the reviews)
- World's Fastest Mounting Gravity Balance Skateboard Wall Hanger
- HoverMount ALL OG, Popsicles, Longboards and Complete Skateboards
- No Drilling Holes in your Valuable Skateboard. Perfectly Swap Boards at Will
- Utility Patented Superior Functionality The PRO's Choice
Features:
Specs:
Color | Black |
Length | 2 Inches |
Weight | 0.220462262 Pounds |
Width | 2 Inches |
2. P-REP 32mm Solid Performance Fingerboard Trucks - with Lock Nuts and Baked Bushings
Chrome 32mm SOLID performance tuned nuts trucksSet of BKF Blue Baked BushingsFull set of 6 lock nuts for kingpins and wheelsComes as a set of 2 trucks with all necessary nuts, and screwsAssembly tool, instructions and P-REP and Broken Knuckle stickers included - From Broken Knuckle fingerboards
Specs:
Color | Chrome |
Size | 32mm |
3. Peoples Republic - Chape - Foam Grip Tape for Wooden Fingerboard - 6 Pieces Uncut
6 pieces uncut foam gripComes with P-Rep and Broken Knuckle fingerboards stickers
Specs:
4. P-REP Starter Complete Wooden Fingerboard 30mm - Red
- The wooden fingerboard to get you going right, Assembly is Required
- P-REP Deep Mold 5 ply Wooden Fingerboard Deck - 30mm x 100mm
- 29mm trucks with hard yellow tuning
- Basic Bearing Wheels and precut foam grip tape
- Assembly tool, simple instructions and P-REP and Broken Knuckle stickers included
Features:
Specs:
Height | 0.5 Inches |
Length | 5 Inches |
Width | 3 Inches |
5. Skull Fingerboards Hippie Jesus 34mm Pro Complete Professional Wooden Fingerboard Mini Skateboard 5 PLY with CNC Bearing Wheels
1x Hippie Jesus Deck (Low Kicks, Low Concave, 5 PLY, 96mm x 34mm)2x Skull Pro Trucks Chrome/Chrome (32mm) - Single Axle // 6 Lock Nuts4x Shadow CNC Single Bearing Wheels1x Skull Tool1x Uncut Skull Tape
7. Teak Tuning Prolific Complete Fingerboard with Upgraded Components - Pro Board Shape and Size, Bearing Wheels, Trucks, and Locknuts - 32mm x 97mm Handmade Wooden Board - Toasted S'Mores Burl Edition
- COMPLETE FINGERBOARD SETUP || Complete fingerboard setup with upgraded components that includes everything you need to build your 32mm fingerboard. The PROlific series by Teak Tuning features high quality gear at low prices. It is the sweet spot between expensive, high end gear and cheaper, entry level gear
- TOASTED S'MORES EDITION || Includes the PROlific dark wooden deck, white 32mm spacer trucks with o-ring tuning, brown polyurethane bearing wheels, PROlific foam tape, mini filing board, 4 spacers, 4 regular nuts, 4 upgraded stainless steel lock nuts with nylon inserts, 1 tool, and 1 set of brown handmade Bubble Bushings
- UPGRADED COMPONENTS || The included stainless steel lock nuts with nylon inserts are designed to prevent wheels from falling off during tricks ensure that wheels will not fall off during use
- ASSEMBLY REQUIRED || Assembly is required. Instructions are provided to assemble the components into a complete fingerboard
- FOR RIDERS OF ALL SKILL LEVELS || Perfect for riders of all skill levels. Includes a free Teak Tuning sticker. Choking Hazard: Small Parts. Not suitable for children under the age of 16
Features:
Specs:
Color | Toasted S'mores |
Height | 0.25 Inches |
Length | 5 Inches |
Number of items | 1 |
Size | With Spacer Trucks |
Width | 2 Inches |
8. Teak Tuning Bubble Bushings, Professional Shaped Fingerboard Tuning, Black/White Swirl, Pack of 5
Pack of 5 black/white swirl Bubble Bushings with a free Teak Tuning stickerTrucks shown in photo are for demonstration and are not included with tuning kitCompatible with all fingerboard trucksHigh performance shaped fingerboard tuning modeled after realistic skateboard trucks. Hand made in New York...
Specs:
Color | Black/White |
Height | 0.1 Inches |
Length | 1.8 Inches |
Number of items | 1 |
Size | OG Series - 60A-ish |
Width | 1.8 Inches |
9. Teak Tuning O-Ring Fingerboard Tuning Kit, White
- White Teak Tuning O-Ring Kit. Each kit includes: 4 Original Teak O-Ring Bushings, 4 Stainless Steel Washers, 2 Pivot Cups, 1 Mini Teak Sticker
- Teak Tuning is made from a durable, tear resistant, and strong material that lasts long and performs great.
- Compatible on all fingerboard trucks including Blackriver Trucks, Dynamic Trucks, Tech Deck Trucks, FlatFace Dump Trucks, Y-Trucks (remove washers to use on Y-Trucks)
- Perfect for all truck tightness preferences. Use full kit for tight and medium trucks. Remove washers for loose trucks.
- Choking Hazard: Small Parts. Not suitable for children 14 and under.
Features:
Specs:
Color | White |
Height | 0.1 Inches |
Length | 1.8 Inches |
Width | 1.8 Inches |
10. Peoples Republic P-REP Fingerboard CNC Lathed Bearing Wheels - Yellow
- From Broken Knuckle fingerboards
- P-REP Yellow CNC Lathed Bearing Wheels
- Comes as a set of 4 wheels
- Instructions and P-REP and Broken Knuckle stickers included
Features:
Specs:
11. Hexbug Tony Hawk Circuit Boards Power Set Remote Control Skateboard
Tony Hawk Circuit Board Power Board Set by HEXBUGUnleash your inner pro-skater with HEXBUG's new line of Tony Hawk Circuit Boards!Birdhouse authentic deck included!Removable power axle and remote control for two ways to playTurbo boost for accelerated ramp action
🎓 Reddit experts on finger toy skateboards
The comments and opinions expressed on this page are written exclusively by redditors. To provide you with the most relevant data, we sourced opinions from the most knowledgeable Reddit users based the total number of upvotes and downvotes received across comments on subreddits where finger toy skateboards are discussed. For your reference and for the sake of transparency, here are the specialists whose opinions mattered the most in our ranking.
I would say the deck and wheels should be fine. I have a set of noahwood wheels and they're actually pretty good. But I would have to agree with everyone else on the trucks. Spend a few extra bucks and get these:
https://www.amazon.com/dp/B07VWLH8DZ/ref=cm_sw_r_cp_apa_i_UQtODbGGE6FEW
Come in different colors as well. Enjoy!
Gun Grip works great and is pretty cheap. https://www.amazon.com/dp/B01FLQO5IU/ref=cm_sw_r_cp_api_WhnVBbBFE90CY
If you don’t mind a rougher texture fingerboard / skateboard grip tape is awesome but can tear your hands up over time if you move your hand position a lot.
There is also a foam version for fingerboards “Tech Decks” that Ive been meaning to try. https://www.amazon.com/dp/B00AW3ZRF8/ref=cm_sw_r_cp_api_RknVBbC6P81AG
/r/fingerboards
For 12$ you can get a fingerboard that works about 100x better than a tech deck. Fun desk toy :)
FYI I picked up my board last night, lejoost was really nice, and the art and boards are all made in Astoria, and of very good quality. I just ordered this skateboard deck hanger from Amazon and am looking forward to putting my little slice of Astoria up on the wall.
i bought a p-rep a couple years ago and it wasn’t that great imo. if you can spend just a little bit more i would suggest a skull fingerboard complete setup, they’re about $30 and the shape and quality was better than my old p-rep.
34mm skull fingerboard
Works real nice for mine. Might be able to poke two small holes and that's it. Will help with wood warping
SkateHoarding Skateboard Wall Hanger Mount Rack Display https://www.amazon.com/dp/B010OW6EPI/ref=cm_sw_r_cp_api_scvazbFCKEMF1
https://www.amazon.com/gp/aw/d/B010OW6EPI/ref=ya_aw_oh_bia_dp?ie=UTF8&psc=1
These are great!
Amazon! Same place I got my blank decks.
https://www.amazon.com/gp/aw/d/B010OW6EPI/ref=mp_s_a_1_1?qid=1450366413&sr=8-1&pi=SY200_QL40&keywords=skateboard+wall+mount&dpPl=1&dpID=41ZveIjLycL&ref=plSrch
https://www.amazon.com/dp/B008AJQ804/ref=cm_sw_r_other_apa_i_ETw4DbETPS32F
Yeah its tech deck, but its wood and these are the only ones Ive ever been able to find with the flat nose.
Whoa! Those Hexbug skateboards are less than a tenner: https://www.amazon.co.uk/Tony-Circuit-Board-Power-HEXBUG/dp/B00NCQZLM6/ref=pd_lpo_vtph_21_bs_t_2?_encoding=UTF8&psc=1&refRID=CER01QCPM358ERJR6X9J
A lot of possibility there...
https://www.amazon.com/Peoples-Republic-Fingerboard-Lathed-Bearing/dp/B01F1FEU6I/ref=mp_s_a_1_67?keywords=Broken+Knuckle+Fingerboards&qid=1573256253&sr=8-67 THE LINK FOR THE FLAT WHEELS.
Use small sections of the casing from old apple ear buds for pivot cups. Take out the 4 cup washers from the bushings on the trucks and put them on the axles with cup side towards the truck, in between the wheels and the trucks. Replace the bushings with tiny o-rings and tiny washers. I got them at the hardware store. Essentially you need these parts. https://www.amazon.com/Teak-Tuning-Ring-Fingerboard-White/dp/B07FMTHDHY/ref=mp_s_a_1_13?keywords=teak+bushings&qid=1574018243&sr=8-13 The pivot cups are the small tubes in the photo. You can use earbud cable casing, stripped off of the wire.
Here are the trucks: https://www.amazon.com/Teak-Tuning-Professional-Prodigy-Upgraded/dp/B07X3FRP77/ref=pd_sbs_21_44?_encoding=UTF8&pd_rd_i=B07X3FRP77&pd_rd_r=0da8b43c-5eb4-4eb9-942e-05fbfe383640&pd_rd_w=7xZeB&pd_rd_wg=hoLO5&pf_rd_p=52b7592c-2dc9-4ac6-84d4-4bda6360045e&pf_rd_r=0S1DH91YZ1RFBF35HHHQ&psc=1&refRID=0S1DH91YZ1RFBF35HHHQ
And here are the bushings: https://www.amazon.com/Teak-Tuning-Bushings-Professional-Fingerboard/dp/B07FMWXRL1/ref=sr_1_2?keywords=teak+bubble+bushings&qid=1574125774&sr=8-2
Or this
PROlific Complete Fingerboard with Upgraded Components - Pro Board Shape and Size, Bearing Wheels, Trucks, and Locknuts - 32mm x 97mm Handmade Wooden Board - Toasted S'Mores Burl Edition https://www.amazon.com/dp/B07V81SQ86/ref=cm_sw_r_cp_api_i_lBpNDb6Z383K6