Reddit mentions: The best guitar slides
We found 31 Reddit comments discussing the best guitar slides. We ran sentiment analysis on each of these comments to determine how redditors feel about different products. We found 9 products and ranked them based on the amount of positive reactions they received. Here are the top 20.
1. Dunlop 202 Glass Slide, Regular Wall Thickness, Medium
- Dunlop bottleneck glass slide
- Regular wall thickness - medium diameter
- Good for pros and beginners
- Country of Origin: United States
Features:
Specs:
Height | 0.8 Inches |
Length | 5 Inches |
Number of items | 1 |
Release date | October 2010 |
Size | Medium |
Weight | 0.04 Pounds |
Width | 4 Inches |
2. Dunlop 926 Lap Dawg Tonebar, Chromed Brass
- Add sustain and vibrato to your lap guitar playing with the Dunlop Lap Dawg Chromed Brass Tonebar
- Redesigned body with larger radius
- The Dunlop Lap Dawg Chromed Brass Tonebar has a larger radius that adds sustain and vibrato
- The bar's ergonomic body offers a more comfortable grip and side angles that improve speed and clarity for hammer-ons and pull-offs
- 3/4" diameter
Features:
Specs:
Color | Original Version |
Height | 3.6 Inches |
Length | 1 Inches |
Number of items | 1 |
Release date | October 2010 |
Weight | 0.35 Pounds |
Width | 0.9 Inches |
3. Dunlop 212 Tempered Glass Slide, Heavy Wall Thickness, Small Short
- Short/small dimensions:17mm inside diameter, 35mm outside diameter, 51mm length.
- Fits ring size 6.5Small dimensions:17mm inside diameter, 35mm outside diameter, 51mm length. Fits ring size 5.5
Features:
Specs:
Color | Short / Small |
Height | 4 Inches |
Length | 1.3 Inches |
Number of items | 1 |
Release date | May 2012 |
Weight | 0.1 Pounds |
Width | 5 Inches |
4. Ernie Ball Glass slide, Small
- Seamless Pyrex glass
- Silky bluesy slide sounds
- 4mm thick
- 25mm outside diameter
- 48mm long
Features:
Specs:
Height | 5.1 Inches |
Length | 5.75 Inches |
Number of items | 1 |
Release date | September 2008 |
Size | Small |
Weight | 0.1 Pounds |
Width | 2 Inches |
5. Dunlop 210 Tempered Glass Slide, Medium Wall Thickness, Medium
- Accentuates the middle harmonics of your sound
- Processed from high-quality boron silicate
- Heat treated and annealed
- Medium, fits ring size 11
- Medium with heavy wall fits ring size 10-1/2 Large fits ring size 14
- Accentuates the middle harmonics of your sound
- Heat treated and annealed
- Medium, fits ring size 11
- Medium with heavy wall fits ring size 10-1/2 Large fits ring size 14
Features:
Specs:
Height | 1 Inches |
Length | 4 Inches |
Number of items | 1 |
Release date | October 2010 |
Size | Medium |
Weight | 0.05 Pounds |
Width | 4 Inches |
6. Planet Waves Glass Slide, Small
Made from boron silicate for enhanced durability, smoothness and toneFlawless finish and extra smooth surface glides over strings4mm wall thickness produces warm, thick tone and sustain48mm length, 17mm inner diameterAvailable in small, medium and large sizes; clear glass slides
Specs:
Color | Small |
Height | 5.8 Inches |
Length | 3.9 Inches |
Number of items | 1 |
Size | Small |
Weight | 0.0440924524 Pounds |
Width | 1.2 Inches |
7. Ernie Ball Glass slide, Medium
Seamless Pyrex glassSilky bluesy slide sounds4mm thick25mm outside diameter58mm long
Specs:
Color | Glass |
Height | 5.1 Inches |
Length | 5.75 Inches |
Number of items | 1 |
Release date | September 2008 |
Size | Medium |
Weight | 0.15 Pounds |
Width | 2 Inches |
8. Dunlop 220 Chromed Steel Slide
Specs:
Color | Chrome |
Height | 4 Inches |
Length | 5 Inches |
Number of items | 1 |
Release date | October 2010 |
Size | .50mm |
Weight | 0.1 Pounds |
Width | 1 Inches |
🎓 Reddit experts on guitar slides
The comments and opinions expressed on this page are written exclusively by redditors. To provide you with the most relevant data, we sourced opinions from the most knowledgeable Reddit users based the total number of upvotes and downvotes received across comments on subreddits where guitar slides are discussed. For your reference and for the sake of transparency, here are the specialists whose opinions mattered the most in our ranking.
Making a simple but effective IH is so cheap and easy every Dynavap owner should do it.
IH instructions:
Here it is: https://imgur.com/a/3i4UmNQ
Circuit: https://www.amazon.com/gp/product/B01CNM24YM/
Power Supply Unit (PSU) https://www.amazon.com/gp/product/B07DNW1CNB
Glass insulator https://www.amazon.com/gp/product/B0009EQMZE
Beyond this, all you need is 2 small wires (unbraided, thick copper wires will work best), cutters to make them, a small jeweler's screwdriver to screw them down, and a power strip for a poor-man's power switch. If you don't have any of these things, they are also cheap.
First, untwist your induction coil one wrap and spread it out and around the glass insulator slide to match the pic. This spacing gives you a 20-second light with a Ti vapcap sitting at the bottom, which is pretty heavy. If you want it lighter, either leave the coils tighter or just put a cork plug in the bottom of the tube to raise the bottom where the vapcap sits. You can get it down to about 4 seconds with this PSU. Basically, holding it in the center of the coil or keeping the coils tighter will speed it up. 20 seconds is ideal for me. Makes about 2-3 big bong rips per load.
Screw in the ends of the induction coil into the side closest to the circuit coils going in the same direction (see pic). Screw your 2 small wires into the other end of the circuit, and clip the other ends of the wires into the little adapter that comes with the PSU. Don't worry about polarity. The circuit simply won't work the wrong way (blue light won't come on).
Plug in the AC side of the PSU to your power strip (turned off) and the other end into the adapter that came with it, now clipped into your induction heater (this part is covered with tape in the pic, but it's as simple as it sounds).
Hit the power strip switch to operate. Be sure to turn it off before removing the vapcap so you don't forget. Forgetting will result in an overheating unit (yes, the coils get very hot very fast) and early failure. I had one circuit board melt this way. Pretty cheap if it happens but beware. I've used this one for many months now without issue just being mindful. Good luck!
It's actually pretty simple. At it's most basic, try this comment from /u/improvaper
https://www.reddit.com/r/vaporents/comments/a4xzkk/finally_jumped_on_the_dynavap_bandwagon_and_got/ebij6op
Make an induction heater! It's cheap and easy. I've been blasting my instructions everywhere around here lately. If you're interested, let me know and I'll blast them again here. :)
It's definitely worth the (extremely little) effort.
Edit: blasting:
I made mine for about $30 with parts available on Amazon:
Here it is: https://imgur.com/a/3i4UmNQ
Circuit: https://www.amazon.com/gp/product/B01CNM24YM/
Power Supply Unit (PSU) https://www.amazon.com/gp/product/B07DNW1CNB
Glass insulator https://www.amazon.com/gp/product/B0009EQMZE
Beyond this, all you need is 2 small wires (unbraided, thick copper wires will work best), cutters to make them, a small jeweler's standard screwdriver to screw them down, and a power strip for a poor-man's power switch. If you don't have any of these things, they are also cheap.
First, untwist your induction coil one wrap and spread it out and around the glass insulator slide to match the pic. This spacing gives you a 20-second light with a Ti vapcap sitting at the bottom, which is pretty heavy. If you want it lighter, either leave the coils tighter or just put a cork plug in the bottom of the tube to raise the bottom where the vapcap sits. You can get it down to about 4 seconds with this PSU. Basically, holding it in the center of the coil or keeping the coils tighter will speed it up. 20 seconds is ideal for me. Makes about 2-3 big bong rips per load.
Screw in the ends of the induction coil into the side closest to the circuit coils going in the same direction (see pic). Screw your 2 small wires into the other end of the circuit, and clip the other ends of the wires into the little adapter that comes with the PSU. Don't worry about polarity. The circuit simply won't work the wrong way (blue light won't come on).
Plug in the AC side of the PSU to your power strip (turned off) and the other end into the adapter that came with it, now clipped into your induction heater (this part is covered with tape in the pic, but it's as simple as it sounds).
Hit the power strip switch to operate. Be sure to turn it off before removing the vapcap so you don't forget. Forgetting will result in an overheating unit (yes, the coils get very hot very fast) and early failure. I had one circuit board melt this way. Pretty cheap if it happens but beware. I've used this one for many months now without issue just being mindful. Good luck!
Lap Steels are fairly simple, so you don't really have to spend that much to get a good one. But there are some accessories you will need.
For a first lap steel the SX Lap Steel is very well made and includes a stand and case. Its only $150.
You will also need a good tone bare. Dunlop chromed brass For $20.
Also I would get him a volume pedal Ernie Ball Volume pedal For $65.
Other little nice gifts, would be a clip on snark tuner, a couple of instrument cables, song book, and some extra strings.
Ignore what the other person said about fret wear and action height. You are not pushing the strings down to the frets, you are sliding on the string with a tone bar or a guitar slide. Higher is better in this case.
Does he have an amp? Any other effects pedals?
edit: Also a capo like this will be helpful if he is just playing along with random songs.
Good morning, frients!!! I just completed my IH build based on A LOT of research/lurking around these parts. Here are a few more pictures of the setup/internals:
​
https://i.imgur.com/pEex7Xh.jpg
https://i.imgur.com/ntdy5qi.jpg
https://i.imgur.com/HoTzHAi.jpg
https://i.imgur.com/JDlo2FV.jpg
https://i.imgur.com/Hiz0sea.jpg
​
**Update/Parts List**
Box/Enclosure
Induction heater board w/coil
Glass tube
(I shoved a cork in there from an old craft beer bottle. I just shaved it down with an x-acto knife until I was happy with the fit/spacing)
Mosfet
Power supply
Red toggle switch
Momentary switch
DC panel-mount jack
Insulated crimp connectors
I used 16-gauge red/black wiring and insulated crimp connectors I had left over from previous projects.
​
Here's the bubbler I was using with the optional glass mouthpiece.
​
Total: ~$65 USD
​
TL;DR This thing is badass and easy to put together. Do it!!!
I don't believe you have gifted me. Been playing a ton of guitar lately and this would be super nice :)
Sweet contest :D
Well worked well for me for my first go. Best vapor I’ve gotten so far from the IH. Didn’t seem to get the glass overly hot. Dunlop 212 Tempered Glass Slide, Heavy Wall Thickness, Small Short https://www.amazon.com/dp/B0002GWNNE/ref=cm_sw_r_cp_api_WueLBb2MNA17C
The enclosure I used: https://www.amazon.com/dp/B07TS6RY85/ref=cm_sw_r_cp_apa_i_AyhxDbV7EHBCN
The 5A power supply (5A and you don't have to use a mosfet): https://www.amazon.com/dp/B01461MOGQ/ref=cm_sw_r_cp_apa_i_GzhxDbQWPT5QR
I used a glass slide tube for inside of the coil. You will have to rewrap the coil on the IH to fit around the slide, not hard at all: https://www.amazon.com/dp/B001FWYAWQ/ref=cm_sw_r_cp_apa_i_MAhxDbTK5P2YY
The actual IH: https://www.amazon.com/dp/B01GDVVANA/ref=cm_sw_r_cp_apa_i_lChxDb0DGE3TM
The 5v switch w/ wiring harness (you don't need any extra wires this way): https://www.amazon.com/dp/B075QBJVTS/ref=cm_sw_r_cp_apa_i_fDhxDb7HTYE19
A Unibit would be a good thing to have to get the 3 holes drilled in the box. A hotglue gun and a screwdriver and your set....
Schematic (borrowed from another user... can't remember who!
Parts list (canadian, but you can find everything on amazon and/or ebay, or locally):
Heater Board and Coil: https://www.amazon.ca/BAQI-5V-12V-Voltage-Induction-Heating/dp/B0747NBTBX
MOSFET Relay (for operating the momentary switch): https://www.amazon.ca/DROK-Transistor-Driving-Electronic-Controller/dp/B01J78FX9S
Power Supply (or if you have one from an xbox 360 it'll work) This one also includes the female jack: https://www.amazon.ca/Signcomplex-Supply-Transformer-Switching-Adapter/dp/B075R3RW6J
Glass tube: https://www.amazon.ca/Dunlop-202-Dun-Bottleneck-Slide-Reg/dp/B0009EQMZE
Main power switch: https://www.amazon.ca/Pilot-PLSW26-Safety-Racing-Toggle/dp/B000GTMUUI
Momentary Switch to activate the coil ONLY while pressed: https://www.amazon.ca/Ulincos-U16A1-Black-Button-Switch/dp/B015X34IP6
You'll also need some 18ga stranded wire, an enclosure, and some soldering skills/equipment.
it's called a Slide. you can buy it
edit :
http://www.amazon.com/Dunlop-220-Chromed-Medium-Thickness/dp/B000EEJ8IM/ref=zg_bs_486416011_2/190-0278765-0048167
All rings are defective IMO.
Wait, found a good one: http://www.amazon.com/Will-Stealth-Slide-Ring-Guitar/dp/B002497ZJ4
https://www.amazon.com/gp/product/B0049B3YXQ/ref=ox_sc_act_title_3?smid=ATVPDKIKX0DER&psc=1 what i used
It could be patented but not out on the market yet. A quick Google search didn't help too much, but I found something sorta similar.
http://www.amazon.com/Will-Stealth-Slide-Ring-Guitar/dp/B002497ZJ4
Heater
Switchboard
Glass slide
Missing out of this is just some wire and a SPST switch(single pole single throw, just on and off) momentary switch (press when you heat the cap) and optional led lights. I ordered the switch and wire from analogboxmods for decently priced.
I'll edit this comment when I find the link to the guys post that really helped me out with all the wiring.
Edit- https://www.reddit.com/r/Dynavap/comments/btmvt9/basic_induction_heater_schematic_includes/?utm_medium=android_app&utm_source=share