Reddit mentions: The best lab crucibles
We found 3 Reddit comments discussing the best lab crucibles. We ran sentiment analysis on each of these comments to determine how redditors feel about different products. We found 2 products and ranked them based on the amount of positive reactions they received. Here are the top 20.
1. Quartz Silica Melting Crucible for Gold & Silver
- Crucible measure: 58mm diameter width at top
- Capacity: 150 grams.
Features:
Specs:
Height | 1.49999999847 Inches |
Length | 3.40157479968 Inches |
Weight | 0.1543235834 Pounds |
Width | 3.09842519369 Inches |
2. Ingot Mold 310 Gram Capacity
- This is a new open ingot mold
- This can be used to recycle scrap metal into sheet and wire
- It has a capacity of 200 dwt
- The ingot size measures approximately 6 1/8" x 2 9/16" x 1 9/16" (155 x 65 x 40 mm)
- Overall length measures approximately 10 1/4" x 3 5/16" x 2" (260.35 x 84.2 x 51 mm)
Features:
🎓 Reddit experts on lab crucibles
The comments and opinions expressed on this page are written exclusively by redditors. To provide you with the most relevant data, we sourced opinions from the most knowledgeable Reddit users based the total number of upvotes and downvotes received across comments on subreddits where lab crucibles are discussed. For your reference and for the sake of transparency, here are the specialists whose opinions mattered the most in our ranking.
And here's my idea for one that I posted in the same thread. I'll leave the disclaimer cause it's funny.
Here's my crazy idea, cause imma be real I'm pretty fucked up right now, so let's go:
What you need, this can all be found online, in a hardware store, and at your house:
Steps:
If you have a hose barb, drill a hole in one side of the mason jar lid big enough to screw the hose barb into. Screw the hose barb into it, and attach the latex tubing to the other side (or wait to do that until you finished the rest of the project).
That's it! In order to set it up, connect the latex tube to the hose barb if you haven't already (and if that's how you built yours), screw the mason jar lid on to the mason jar and dab away!
In order to dab, get your wax on your dab tool and your silicone pad ready. Heat up the coil to red hot, then turn it off. Get ready with the dab and let it cool. As soon as it's just barely red, start to inhale and dab it. As soon as the dab tool is clean, cap it with the silicone pad and clear as normal.
Make sure to take some pictures and tell me how it works!
OPTIONAL:
Male|LINK|LINK|LINK|
Female|LINK|LINK|LINK|
Glue the vinyl tubing into the female side with some of the thicker glue, instead of just sticking it onto/into your bong. Now the whole thing attaches with glass-on-glass action!
Ingot Mold 310 Gram Capacity https://www.amazon.com/dp/B000RB520U/ref=cm_sw_r_cp_api_5-cQBb75Z7AHM
This is the one i use and it works great