Reddit mentions of Grifiti Chiton Fat 12 6.5" x 13.5" Neoprene Keyboard Sleeve 10keyless Mechanical and 11-13 Inch Keyboards with Mouse Pocket

I got this one and it works great for a 60% sized board like the Anne.

This fits it well, especially combined with the Decksaver:

https://www.amazon.com/gp/product/B00MRK233I/

Personally I use this $15 soft case, its not as perfectly snug as I expected it to be - it has some additional space at the end and at the top (they do have a pocket up top so I put the cable in there, which fills up some space). With this, I usually dump my keyboard in the main section of my backpack. I don't carry more than 2 books around though. Feels safe to me.

Here's a pic when the keyboard is all the way to the end.

Here's a pic of where the keyboard "ends" when the sleeve is closed

https://www.amazon.co.uk/dp/B00MRK233I/ref=cm_sw_r_cp_apa_i_K3ODCb7JVZGWG

Got this for mine :)

Are you transporting your multiple zz96 Kev? lol

I just use a sleeve :P and my backpack is padded ... I also have some extra padding in there using more sleeves like this [neoprene one] (https://www.amazon.co.uk/10keyless-Mechanical-Keyboards-Steelseries-Quickfire-x/dp/B00MRK233I/ref=sr_1_1?ie=UTF8&qid=1496768114&sr=8-1&keywords=keyboard+sleeves)

Though to be fair I do not have lots of books, if any at all.

Grifiti Chiton, I have one, and works very nice for my KBP V60.

Yeah the workaround is a PITA but I already did it like, 5 million times today so now I’ve got it memorized. It makes sense why you need it, as the menu key shows you what color you’re trying to use, but grr lol. Yeah I have a 90° cable for my iPhone and love it, but at least right now both my work and home setups work really well with a straight cable. A 90° angle would make things really complicated RE: desk space.

I also immediately flipped on dipswitch 3 and loooove using capslock+IJKL for the arrow keys. So much more logical and easy.

I got this case on Amazon and it’s really great. It’s recommended in the wiki here in this sub, too. It’s cheap and gets the job done - plus the pocket for cables/mouse is an added bonus. The Pok3r has a bit of wiggle room but nothing serious - especially when the case is really only there to prevent shit from getting under the keycaps.

Good luck in your internship!

It's this one

It's pretty standard, but it fits like a glove :)

Thanks man. i will keep an eye out.
i am looking on amazon and i notice two sizes. which size is suitable?

as a side note, on the amazon link http://www.amazon.com/gp/aw/d/B00MRK233I?pc_redir=1413519365&robot_redir=1#, whats thr make of the keyboard shown in the picture?

I just use this one from Grifiti. It's not the prettiest thing out there but it does the job, I throw mine in a bag all the time. Sorry for the crappy cell pic but here's one:
photo

edit: used wrong Amazon link

this is sleeve in question: https://www.amazon.co.uk/gp/product/B00MRK233I/ref=ox_sc_act_title_1?smid=A2ALCKKI3H40W4&psc=1

its fits the Pok3r perfectly, there's also a little hole for the default cable, you won't fit a custom cable in there if it's coiled :(, also which cases on Etsy are you looking at? I'm interested

I use the Grifiti Chiton Fat 12 for my Leopold 660M. I would go for that.

Like this? or are you looking for something with handles, because I don't think that's a thing for 60%s.

I use this Grifiti sleeve for mine.

These are some options I've found for my 60%

https://flashquark.com/product/60-hard-shell-carrying-case-with-handle/

Not specifically made for carrying a keyboard, but could easily work:

https://www.amazon.com/dp/B06XKTK686/?coliid=I34EY177ASCVP1&colid=3320TGSSH9XK7&psc=0&ref_=lv_ov_lig_dp_it
https://www.amazon.com/dp/B01N4MX19P/?coliid=I3C9RZFL45EIMN&colid=3320TGSSH9XK7&psc=0&ref_=lv_ov_lig_dp_it

Some not so hard options that work just fine:

https://www.switchsmith.co/collections/sleeves/products/40-stuffed-sleeper
https://www.amazon.com/dp/B00MRK233I/?coliid=I3VY2B8MWJSS7M&colid=3320TGSSH9XK7&psc=0&ref_=lv_ov_lig_dp_it

I don't have a 60% but for my 100 and 80 I use these for travel/storage. https://www.amazon.com/Neoprene-Keyboard-10keyless-Mechanical-Keyboards/dp/B00MRK233I?ref_=bl_dp_s_web_3030034011 (this one is for 60%)

WIKI Often know the answers to questions !

I personaly got those ONE for a poker and they are very nice so they should work well with HHKB2 too .

Got mine on amazon.co.uk , probably avaible on amazon.de too :)

Here you go, and as Azhdar said, it fits perfectly, no room to slide around or anything.

I've got a Grifiti Chiton Fat 12 due to show up tomorrow. I'll report back on how it is.

This is a perfect fit and cheap it even has a pouch for my mouse.

Vortex case: https://www.amazon.com/dp/B00WMO9LT8/ref=cm_sw_r_awd_grKGvbZH1FP6K

1upkeyboards case (This is the one I have): http://1upkeyboards.com/product_info.php?cPath=1_4&products_id=36

Ducky case: https://mechanicalkeyboards.com/shop/index.php?l=product_detail&p=1000

Grifiti Chiton case: https://www.amazon.com/10keyless-Mechanical-Keyboards-Steelseries-Quickfire/dp/B00MRK233I