#4,574 in Sports & Outdoors
Use arrows to jump to the previous/next product
Reddit mentions of Hammers .22 Crossbow Airgun Scope Rail Adapter Riser 3/8inch 11mm Dovetail to Weaver w/Pointed Stop Pin
Sentiment score: 2
Reddit mentions: 2
We found 2 Reddit mentions of Hammers .22 Crossbow Airgun Scope Rail Adapter Riser 3/8inch 11mm Dovetail to Weaver w/Pointed Stop Pin. Here are the top ones.
or
Converts dovetail rails to a 9 slot Weaver railAlso works as a riser mount that raises line of sight by 0.571inchBulit-in pointed stop pin and 3 clamping screws for extra holding power (needs to have predrilled receiver top to apply)Reversible side plate to adjust fit between 3/8inch and 11mm dovetail railsGreat for use on .22 rifles, airguns and crossbows wth dovetail scope bases
Specs:
| Color | Black |
| Weight | 0.14375 Pounds |
You're going to need a scout style (long eye relief) optic
The rear sight is on a 3/8 dovetail. . Remove the rear sight and either get a set of 8/8 rings or a 3/8 to 11mm adapter and some 11mm rings. If you do the adapter I'd suggest drilling a shallow dimple to tighten the set screw on the adapter so that it starys put during the recoil. I used this and it works great.
They also make adapters that go into the rear sight so that you don't remove it but I'm fairly certain they're a bit more expensive
Really pleased with this mount. http://www.amazon.com/dp/B009ZKHD3S/ref=pe_175190_21431760_3p_M3T1_ST1_dp_1
Solid as a rock and mounts well to the dovetail. I left my rear pin in and filed a little off of the mount so that the pin acts as a stop bar. If I cared a little more about looks I'd have drilled holes instead. But honestly it doesn't need more than the included stopper as long as you drill a small impression for the pin. Also Pleased with this scope if you are looking for that too. http://www.amazon.com/dp/B000FH6M00/ref=pe_175190_21431760_3p_M3T1_ST1_dp_1