#19,087 in Tools & Home Improvement
Use arrows to jump to the previous/next product
Reddit mentions of iTouchless EZ Faucet PRO Automatic Sensor Faucet Adapter for Bathroom, Kitchen Sink, also use as Cat Fountain and Pet Water Dispenser
Sentiment score: 1
Reddit mentions: 8
We found 8 Reddit mentions of iTouchless EZ Faucet PRO Automatic Sensor Faucet Adapter for Bathroom, Kitchen Sink, also use as Cat Fountain and Pet Water Dispenser. Here are the top ones.
or
- 100% Touch-Free & Automatic – Just place your hand under the spout and water will flow automatically. It's the easiest and most hygienic way to use the sink
- No Waste – EZ Faucet automatically shuts off the water when you pull your hands away. It's perfect for children and anyone who wants to conserve water.
- Easy to Install – Easily installed on any standard American faucet. All the tools you will need are included. No complex plumbing required.
- Save Money – No water waste means a lower utility bill for you! Only dispenses water when the sensor is activated intentionally, with no-drip loss.
- Cat Water Fountain – Give your cat fresh, clean water 24/7. Cats find it easy to use and you will enjoy the convenience too.
- Hands-free operation
- Prevents contamination of germs
- Fits standard faucet sizes
- No plumbing change, easy to install
- Manual on/off switch for full control. Hot/cold and water flow can still be controlled by exiting faucet's handles
Features:
Specs:
| Color | Chrome Silver |
| Height | 4 Inches |
| Length | 2 Inches |
| Number of items | 1 |
| Release date | February 2006 |
| Size | 4 in. H x 4 in. W x 2 in. D |
| Weight | 0.4 Pounds |
| Width | 4 Inches |
This is what we have installed on one of our sinks, our cat learned it in 30 seconds, dogs learned it after about 2 days. We've used it for about 5 years now, replaced the device once and replace batteries about once every 9-12 months or so. http://www.amazon.com/gp/aw/d/B000EJXR0M/ref=mp_s_a_1_2?qid=1425782354&sr=8-2&pi=AC_SY200_QL40&keywords=automatic+faucet&dpPl=1&dpID=5120H7BY79L&ref=plSrch
found it
The motion sensor can be bought here. https://www.amazon.com/dp/B000EJXR0M/ref=cm_sw_r_cp_awdb_t1_6byOBbAYT89CX
I dont remember the exact thread measurements on all the adapters, but they can all be found in a normal hardware store.
Non-mobile: http://www.amazon.com/dp/B000EJXR0M/ref=mp_s_a_1_2?qid=1425782354&sr=8-2&pi=AC_SY200_QL40&keywords=automatic+faucet&dpPl=1&dpID=5120H7BY79L&ref=plSrch
^That's ^why ^I'm ^here, ^I ^don't ^judge ^you. ^PM ^/u/xl0 ^if ^I'm ^causing ^any ^trouble. ^WUT?
http://www.amazon.com/iTouchless-Faucet-Automatic-Touch-Free-Adaptor/dp/B000EJXR0M
Purchase: Home Depot, Amazon.com
So I understand you want to shut the water off completely but why not just add something similar to this: http://www.amazon.com/iTouchless-Faucet-Automatic-Touch-Free-Adaptor/dp/B000EJXR0M
It will make your sink a touchless and it will shut off automatically after she's done.
You'll still be wasting water when she does it but I'm sure a few pennies worth of water isn't going to break the budget if you're already in the market for a solution to remotely shut the water off.
Or just replace the facuet completely with a touchless.
I personally like the idea of what the one guy posted but soldering isn't something everyone can do and adding on that is going to probably require a LOT more work because your sink (probably) doesn't have any/much exposed copper. It probably has just enough stubbing through your cabinet for the anglestop to be attached to. So you'd end up needing to route new lines inside your cabinet for that thing to attach to. It would get messy and probably a lot more costly unless you're able to do it yourself.
These are better. No cleaning or refilling.