Reddit mentions of Lalvin Dried Wine Yeast EC #1118 (Pack of 10)

The packaging of this yeast clearly says "Gluten Free." From what I have read around, the dry yeasts are more likely to be safe for celiac than the others. I've used this yeast for sparkling cider before and it turned out great (for us) with no complications from my celiac friends.

do not use turbo yeast, take it from someone who has a friend, that has a dog that has made a few drops of alcoholic beverages... Turbo yeast will make it taste like you are drinking from that old guy at the gyms dirty racquetball socks. Use either a ale yeast us-05 or if you want to go cheap use something like ec-1118 and make sure there us no preservatives in whatever you are fermenting

I've made some slight modifications to this, mostly to make it easier to follow. I've also included steps that should be quite obvious to someone who's done any homebrewing before, but I wish someone had told me when I first started.

I'd link to the original, for the sake of attribution, but the user who posted this deleted their account not long after I wrote everything down.

This will produce a sweet fruit-mead (or melomel). WARNING this will be far more alcoholic than it tastes, and should not be consumed if you've recently taken antibiotics, or suffered gastric distress, as the yeast culture will still be alive, and will happily colonize your intestines if your gut microbiome is too fucked up.

Equipment: Most of this stuff will be a good deal cheaper at your local homebrew store, but I've included amazon links (also to the yeast).

At least 2 (3 is better, for reasons we'll get to) 1-gallon jugs (I don't recommend scaling this up), glass preferred. Add an extra jug for each additional batch. This one includes a drilled stopper and airlock

Drilled stoppers (or carboy bungs) and airlocks, non-drilled rubber stoppers.

An autosiphon and food-safe tubing.

Food-safe sanitizing solution (I recommend StarSan).

An electric kettle with temperature selector is useful, but not needed.

If you want to bottle it rather than just keeping a jug in your fridge:

Empty beer or wine bottles (just save your empties), capping or corking equipment, caps or corks, and a bottling wand.

Ingredients:

2.5 lbs (1130g) honey, clover recommended.

A cup (approximately 250ml) or so of fruit (I recommend blackberries, and I strongly recommend against cherries, other recipes have worked for me, but this yields a very medical flavor with cherries).

1 packet Lalvin EC-1118 yeast (a champagne yeast notable for its hardiness, its ability to out-compete other microorganisms, and its high alcohol tolerance).

Optional: potassium sorbate (to reduce yeast activity when our ferment is done), pectic enzyme (aka pectinase - for aesthetic purposes). Both are also available in bulk.

Process:

Day 1:

Mix sanitizing solution with clean water at specified proportions in one of your jugs, filling the jug most of the way. Stopper it, shake it. Remove stopper, set it down wet-side-up (to keep it sterile), pour the fluid to another jug. There will be foam left behind, this is fine, don't bother to rinse it or anything. At low concentrations this stuff is totally fine to drink, and won't ruin your fermentation or flavor.

Add honey to jug, all of it.

If you have a kettle, and your jug is glass, heat water to around 160F (71 Celsius), pour a volume into your jug roughly equal to the amount of honey present. Fix sterile stopper to jug. Shake until honey and water are thoroughly combined. The heat will make it FAR easier to dissolve the honey. Set aside for an hour or so while it cools. Add clean water 'til mostly full, leaving some room for fruit and headspace.

If you're missing a kettle, or using a plastic jug, this is gonna be a little harder. Fill most of the way with clean water (I recommend using a filter) leaving some room for fruit and headspace. Fix sterile stopper, shake 'til honey and water are thoroughly combined. This will take a while, and you will need to shake VERY vigorously.

At this point, you should have a jug mostly-full of combined honey and water. To this, add fruit (inspecting thoroughly for mold, don't want to add that). Then dump in a single packet of the Lalvin EC-1118 yeast, don't bother rehydrating it first or anything, it'll be fine going straight in. Add pectic enzyme if you have it (this does nothing to the flavor, it just makes the end product less cloudy). Stopper it up, shake it again. This jug now contains your "must" (pre-ferment mead).

Pour some sterilizing fluid in a bowl, put a carboy bung/drilled stopper in the bowl, with an airlock. Ensure full immersion. Let sit for a minute. Replace stopper with your bung/drilled stopper, affix airlock. Fill airlock with clean water, sanitizing fluid, or vodka. Rinse the stopper, fix it to your jug of sanitizing fluid.

Place must-jug in a dark place, I recommend a cabinet or closet.

Days 2-7:

Retrieve jug, give it a little jostle. Nothing so vigorous as to get your mead into the airlock, but enough to upset it. This is to release CO2 buildup, and to keep any part of the fruit from drying out. The foaming from the CO2 release may be very vigorous. Do this over a towel for your first batch. If the foam gets into your airlock, clean your airlock and reaffix it. Perform this jostling procedure at least once per day, more is better.

Day 8:

Final jostling, I recommend doing this in the morning.

Day 9:

let it sit, we want the sediment to settle.

Day 10: Time to get it off the sediment

Shake sterilizing fluid jug. Affix tubing to siphon. Put the siphon in the sterilizing fluid, shake the jug a little just to get the whole siphon wet. Siphon fluid into either a third container or a large bowl. This is all to sterilize both the inside and outside of your siphoning system.

Remove siphon from jug. Give it a couple pumps to empty it of any remaining fluid. Place siphon in your mead jug, leaving the end of the tubing in sterilizing fluid while you do this.

Take the jug that you just siphoned the sterilizing fluid from. Dump what fluid remains in it. Place the end of the tubing in this jug, then siphon the mead into it. Make no attempt to get the last bit of mead into your fresh container, it's mostly dead yeast and decomposing fruit.

Add potassium sorbate if you have it, stopper the jug, place it in your fridge.

Clean the jug you started in. Clean your siphon and tubing.

Day 11:

Let it sit

Day 12 or later: time to transfer again, or bottle it.

If you no longer have a jug full of sterilizing fluid, make one.

Repeat the earlier steps to sterilize the siphoning system, with a bottling wand attached to the end of the tubing if you want to bottle.

Sterilize your bottles or a clean jug, either with fluid or heat.

Siphon mead either into your bottles or jug. Stopper/cap/cork when done.

Put your jug/bottles in the fridge.

The yeast culture is still alive, and will continue to ferment. The fridge, and optional potassium sorbate, will merely slow this down. I recommend drinking any bottles within two months, to avoid a risk of bursting bottles. The mead should already be tasty at this point, but usually tastes much better after a couple more weeks.

EDIT: Fixed the formatting up a bit.

So, first time trying any sort of homebrewing - I went with a few juice blends I put together and added Wine Yeast EC #1118. Should I strain this once I'm happy with the fermentation, or is just piping out it while the sediment is well-settled enough? Thanks!

Edit - Also, what are the most obvious signs of contamination or poor sanitization/sterilization?

For best results, add sugar, add champagne yeast, and put one of these where the cap goes. They fit directly in a welch's container.

You can also use single packets of Lavlin 1118 champagne yeast, or any other yeast that has a high alcohol tolerance. If you can get to a home brew shop they're about $1-ish per packet.

You can boil ascorbic; it will degrade; it's too slow to be practically useful. A 1-hr boil will get rid of aprox. 50% of ascorbic. Source

Also, don't boil it because you'll make shitty cider that way; just buy juice from concentrate if you're trying to make cheap easy cider.

For wine yeast, try any wine-making store near where you live (or homebrewing store), or buy it online - Here's a link to a 10 packs of yeast for $8 USD

> I can't seem to find this EC-1118 stuff yet,

Here you go. Hopefully you can get something like this locally or via the internet. Do not use "turbo yeast" if you can help it. Just use regular bread yeast from any market over turbo's. They are meant for making fuel, not drinking alcohol.