Reddit mentions of Light Bars for Trucks, ADID 36W 4" 4 Inch 3600 Lumen, 6000-6500K Breathable Pin Driving Fog Lights Led Work Light bar for Jeep ATV UTV SUV Truck Motorcycle Boat, 2 Years Warranty, 2 Pack

I am one of the luminous idiots with a light bar in my lower grill(2017 3) tied to my fog light switch.

You can do it but you need to make sure it is not pointed far forward/up. I would suggest you tie it into the fog light, but using the high beams is an option. The problem comes about if the high beam circuit can handle the additional load. Each light will add 4 watts(really 3, but add safety margin.) so a total of 8 watts and 6 amps requiring a 7.5a fuse or the stock fuse +7.5(so 20a fuse stock, 30a fuse with lights). How you can get around this is by using a relay that gives ground when the power to the high beams and power coming directly from the battery with a 7.5a fuse. So when the high beams get power, it also grounds the light pods and turns them on without adding strain to the high beam circuit.

Another option is to use the fog light circuit, this is a great option if you don't have fog lights and is easier but more expensive. You swap a stalk with fogs into the car and wire into the fog light sockets and it will turn on when you turn on the fogs. What is great about this option is that it gives you the ability to use the high beams independent of the light pods and vise versa and because it uses the stock switch, you can have a cleaner install as you don't need to put a button anywhere. You can do the relay trick if you already have fog lights.

Personally I feel the narrow style of light pod like this would look better in either the upper or lower grill as it has less of the stock grill blocking it vs the square 12 diode model you linked to. Also for amazon links you don't need anything from the "ref=" onward, so your link should look like this: https://www.amazon.com/6000-6500K-Breathable-Driving-Motorcycle-Warranty/dp/B07FNFWFDD/