#396 in Camera accessories
Use arrows to jump to the previous/next product
Reddit mentions of [New Version] SMALLRIG BMPCC 4K & 6K Cage for Blackmagic Design Pocket Cinema Camera 4K & 6K w/Cold Shoe, NATO Rail – 2203
Sentiment score: 2
Reddit mentions: 3
We found 3 Reddit mentions of [New Version] SMALLRIG BMPCC 4K & 6K Cage for Blackmagic Design Pocket Cinema Camera 4K & 6K w/Cold Shoe, NATO Rail – 2203. Here are the top ones.
Buying options
View on Amazon.comor
- Not for 6K Pro!!!!!!!【HIGH CUSTOMIZATION】SmallRig BMPCC cage is specifically designed for Blackmagic Design Pocket Cinema Camera 4K & 6K, it would not block any buttons on the camera and you are able to access not only the battery but even the SD card slot. It could be used on DJI Ronin S or Zhiyun Crane 2 gimbal stabilizer
- 【PERFECT PROTECTION】Secure tightly via 2 screws on the top and bottom, 2 detachable small pins are used to prevent your camera from twisting. Rubber pads on the bottom protect your camera body from scratching
- 【MUTIPLE MOUTINGS】This cage comes with multiple mounting points, such as 1/4’’ & 3/8’’ threaded holes, cold shoe and 3/8’’ locating holes for ARRI standard, allow you to attach more accessories, like microphone or SmallRig Articulating Arm – 2070, etc
- 【NATO RAIL】Features built-in nato rail that allows you to quickly release accessories with NATO clamp. Mounting SmallRig Side Handle - 2187 for hand-held shooting
- 【FEATURED RECOMMENDATIONS】Compatible with Ronin S and Crane 2. For better setup, please search “SmallRig Mount for Samsung T5 SSD 2245”, “SmallRig lens adatper support for Metabones 2247” and “SmallRig HDMI cable clamp 2246”, which are exclusively designed for BMPCC 4K & 6K
Features:
Specs:
Height | 2.95275 Inches |
Length | 7.55904 Inches |
Weight | 0.7936641432 Pounds |
Width | 4.52755 Inches |
u/H_anzz - to get started with weddings and music videos on a $2,000 budget I recommend a $1,295 Blackmagic Pocket Cinema Camera 4K with a $69.99 Neewer 35mm f/1.7 manual lens, a $379 Feiyutech AK2000 gimbal, a $79.99 SmallRig cage, a $25.99 SmallRig SSD mount, an $89.99 500GB Samsung SSD, a $19.99 SmallRig battery plate, a $24.50 12V to Weipu cable and a $31.99 set of two NP-F batteries & a dual charger [Referrals].
This is a cinema camera with true 4K DCI resolution, 13-stops of dynamic range and internally recorded pro 12-bit RAW and 10-bit ProRes codecs.
Here's the BMPCC 4K flying on the Feiyutech AK2000:
Here is an example shot with the BMPCC 4K and a Neewer 35mm f/1.7 lens (plus an Oly 12-40):
The BMPCC 4K is also a great camera for weddings and music videos. Here are a few examples:
Weddings
Music Videos
If you decide to go with the Pocket 4K, you might want to subscribe over at r/bmpcc and r/blackmagicdesign - lots of knowledgeable folks there who can help you get the most out of your new camera.
Good luck finding the right setup for your needs!
Yes :) here they are:
Handle: link
Mounting plate: link
Manfrotto Quick Release Plate : link
Follow focus: link
Rods(16" & 6") link
Handlegrip: link
Lens support: link
Shoulder pad: link
Rod clamp: link
Cold Shoe mount: link
To hold the battery I used this rod clamp: link and this plate: link
Battery: link
To connect the battery to the BMPCC 4k I used these cables and the charging cable from the camera to make an adapter: link to cables
Magic arm to hold the monitor: link
Samsung SSD 500gb: link
SSD holder: link
Monitor: link
HDMI cable: link
BMPCC 4k cage: link
I'm using the Sigma 18-35mm (Nikon) and the Viltrox 0.71X Lens Mount Adapter: link
I think that's it :)
Yeah I think I might have to fork over some more money for something like the smallrig cage + adapter support shown here:
https://www.amazon.ca/SMALLRIG-Adapter-Support-Metabones-Compatible/dp/B07KXVBBN3/ref=sr_1_6?crid=E1XEPA28PCZT&keywords=smallrig+cage+bmpcc+4k&qid=1559242116&s=gateway&sprefix=smallrig+cag%2Caps%2C205&sr=8-6
https://www.amazon.ca/SMALLRIG-Blackmagic-Design-Pocket-Cinema/dp/B07KLYGGV7/ref=sr_1_1?crid=E1XEPA28PCZT&keywords=smallrig+cage+bmpcc+4k&qid=1559242116&s=gateway&sprefix=smallrig+cag%2Caps%2C205&sr=8-1
​
I don't do too much handheld, I'd be using my Ronin S most of the time which means I'd also have to balance it all. Any experience doing this?
Also, how do you like your Viltrox?