#16 in Electric motor mounts & accessories
Use arrows to jump to the previous/next product
Reddit mentions of Qubino Z-Wave Plus Universal Relay with Dry Contact Switch ZMNHND3
Sentiment score: 1
Reddit mentions: 3
We found 3 Reddit mentions of Qubino Z-Wave Plus Universal Relay with Dry Contact Switch ZMNHND3. Here are the top ones.
or
WHAT DOES IT DO? Install it behind your push-button garage opener switch, or at the low-voltage installation for your fireplace, or any dry contact circuit to get on/off Z-Wave control and status updates to your smart home hub.WHAT ELSE DO I NEED? Check for NEUTRAL wire in the switch box (VERY IMPORTANT) if connection to 120VAC. If powering the relay by 24 VDC, you'll need a separate power supply. You'll need a compatible Z-Wave hub to use this device (scroll down for details), like SmartThings, Vera, or Home Center Lite. Does NOT work with Wink or alarm panels. Alexa is NOT a Z-Wave hub.DIVERSE INSTALLATION: It's so small, it will easily fit in any location and can be paired with a momentary or on/off wall switch for convenient local control. The relay adds to your system through auto-inclusion making the set-up quick and easy!EXTRA FEATURES: Advanced configuration is available for expert users with open Z-Wave systems (parameter setting input required). THIS RELAY IS NOT SUPPORTED BY WINK, PIPER, OR ALARM PANELS (ADT Pulse, Vivint, Honeywell, Simon XT, and others).IS THERE TECH SUPPORT? Yes! You can always contact the seller or manufacturer for help with wiring or programming your Qubino relay. You'll get additional instructions and step-by-step directions for any installation.
Specs:
| Height | 1.574803148 Inches |
| Length | 0.393700787 Inches |
| Width | 1.574803148 Inches |
Also Qubino (and here) - availability is uneven but it's often discounted. I have a another Qubino relay which works fine.
I also use zwave. I have one like u/DragonMoose but didn’t like the blue light on the switch and I had to modify the decora switch plate to make it fit. I used this: https://www.amazon.com/Qubino-Z-Wave-Universal-Contact-ZMNHND3/dp/B01MSEG2J1/ref=mp_s_a_1_2?keywords=qubino&qid=1569976896&s=gateway&sr=8-2 for the other fireplace which hides behind the switch which matches all my other switches. I was able to get power from an outlet on the same wall as the fireplace switch on one and from an adjacent switch on the other. Works great but does require zwave hub and not cheap, but relatively easy.
Controlling the flame height is not possible with my fireplaces so don’t know about that unless your fireplace has a control for it. I don’t have a blower in my setup but if you have controls to adjust those, you should be able to automate it.
Here are two I found on Amazon...have never used them:
https://www.amazon.com/Wireless-Z-Wave-Multi-Input-Output-Contact/dp/B00B6RZ7MM/ref=sr_1_1?ie=UTF8&qid=1540992794&sr=8-1&keywords=z-wave+relay+dry+contact
https://www.amazon.com/Qubino-Z-Wave-Contact-Module-ZMNHND3/dp/B01MSEG2J1/ref=sr_1_2?ie=UTF8&qid=1540992794&sr=8-2&keywords=z-wave%2Brelay%2Bdry%2Bcontact&th=1