Reddit mentions of Reliable Hardware Company RH-RMSET-25-A 25 Sets of Rack Rail Screws and Washers

Here's the composition of the rack:

• NavePoint 12U Network Rack
  
• TP-Link TL-SG1024: 24 port rackmount switch
  
• TP-Link TL-SG1016PE: 16 port rackmount power over ethernet switch (needed for the Wi-Fi access points)
  
• TP-Link TL-R600VPN: Rackmount router w/ dual-WAN and VPN
  
• Rackmount Power w/ surge protection
  
• Rack shelf: Used to hold modem and NAS
  
• Patch Panel: 24-port Cat6 patch panel (wires go in the pack via punchdown connection, and you run patch cables to the switches)
  
• 12" Patch cables: For connecting between the patch panel, swicthes, other on-rack devices
  
• Synology 416play NAS: Movies, music, pictures, etc. 32 TB in all.
  
  Elsewhere in the house/other useful parts:
  
  
• Keystone Cat6 jacks: one per bedroom, 4 in my home office, 4 in the media room (not built yet), 3 in the family room
  
• 1-, 2-, 3-, and 4-hole keystone wall plates: Buy the number of holes you want and just pop in the keystone jacks
  
• Blank keystone inserts: For when you have too many holes in the keystone plates
  
• Ubiquiti AC Pro x 3: Wi-Fi access points, roughly center of the house on each floor (basement, first, second)
  
• Punchdown tool: For doing the punchdown connections on the patch panel and on each of the keystone Cat6 plugs in each room
  
• Extra rack screws and washers
  
• J-Hook: There are two hooks on each wall, holding service loops for the Cat6 and Coax, respectively.
  
  Useful things I learned:
  
  
• I was originally going to run the wires myself, but never could find the time. Also Cat6 is expensive when not purchased in wholesale quantities (< 10,000 ft). So we hired a local electrician to run the actual wires. It took two of them about 1.5 days to run everything. This was well worth the money, since the project would have taken many months to do in the evenings/on weekends with a toddler running around.
  
• I did all the wall terminations. Since they were punchdowns, it was easy and took one evening after work. The electricians would have charged me another half-day of labor.
  
• I did all the network rack work. This also took one evening after work.
  
• Do NOT buy electrical/networking equipment from a big box hardware store. Always go to a specialized retailer, like an electrician supply store. Their prices will be 1/20th that of the big box store, you won't have to have anything shipped, and their employees actually know what they are talking about. So if you're looking for something that you don't know the name of, you can usually describe it.
  
• Newer construction may have fire breaks/blocks/stops which prevent fire and gases from traveling up the inside of the walls. This makes fire move more slowly and give you more time to evacuate. However, it also means you might need to drill holes/patch walls in order to run wires vertically.
  
• Put in a service loop. If you ever need to re-terminate for any reason (like replacing a patch panel), it will give you extra cable to work with. Do the same thing inside your walls behind the wall plates, since you might have to do the same thing there as well.
  
• Buy networking gear that is rated for the same speed (i.e., gigabit). Your network will only be as fast as the slowest part of it.
  
• Watch out for network loops. This is really easy to do and will cause your router to crash or perform suboptimally. I spent >2 hours debugging on of these as a result of connecting my router to itself by way of both switches.

Pretty much all rack mount stuff. The box itself I made. You can get the AV Keystone jacks and 48 port plate at Monoprice. The rails, screws, additional plates and rack mounted power supplies from Amazon.

http://www.monoprice.com/category?c_id=104&cp_id=10426

http://www.monoprice.com/product?p_id=8630

http://www.amazon.com/Technical-Pro-PS9U-Supply-Charging/dp/B0057RL6DQ

http://www.amazon.com/Reliable-Hardware-Company-RH-6-SRR-Space/dp/B00JQYUI7G

http://www.amazon.com/Reliable-Hardware-Company-RH-RMSET-25-Washers/dp/B00JQYUAQU

http://www.amazon.com/16port-Blank-Panel-Keystone-Jack/dp/B00PEKNW2Y

http://www.amazon.com/kenable-Cable-Management-Universal-Cabinet/dp/B004HTHL20

http://www.amazon.com/CNAweb-Blank-Spacer-Mount-Filler/dp/B01B1T0RZG

http://www.amazon.com/Odyssey-APV01-Space-Panel-Accessory/dp/B0002DV0CW

I had a pile of the keystone jacks from a previous purchase a couple years ago so I did not have to get a whole lot of them. The toslink keystone jack has a issue of popping out which is solved using a zip tie to hold it in.

I bought this shallow mount rack to house everything, these rack shelves, and this hardware pack. It comes with a lock and two keys - very convenient for when everyone's gone from the house or when we throw a rager.