Reddit mentions of Simonds Flat Hand File, American Pattern, Double Cut, Rectangular, Medium, 12" Length, 1-5/32" Width, 7/32" Thickness

I added an LSR to my partscaster project and I'll never have a strat without one ever again. With a good two post tremolo and locking tuners, it's as stable as any locking nut system I've ever tried. I don't understand why Fender only offers it on the HSS version of the deluxe.

I don't have the magic ears like some of the folks who'll tell you the metal nut "suks muh tonez". IMHO, unless you're playing 100% clean jazz type stuff, there's no discernable difference. And the trem comes back to tune even after EVH type abuse, but without the setup hassle or tuning change limitations of a Floyd Rose. Added bonus: worry free string gauge changes. The bearings accommodate 008" to .056" without you having to worry about modifying string slots. And if you want to go lighter gauge with traditional nuts, you sometimes have to replace the nut entirely.

For what it's worth, you can always change out the pups. Or just get a Standard and have an LSR put on it.

EDIT: If you attempt to do an LSR mod yourself, I highly recommend getting a proper file (flat square edges, the exact dimensions of the LSR). I learned the hard way. My neck only cost me $125, so I'm not too bummed about it, but my next one will look alot cleaner and have a much tighter fit. Best to clamp a makeshift jig to guide the file, right onto the neck and use calipers and a straight edge to check your depth and angle often.

• [Wilkinson] (http://www.stewmac.com/Hardware_and_Parts/All_Hardware_and_Parts_by_Instrument/Electric_Guitar_Parts/Electric_Guitar_Bridges_and_Tailpieces/Electric_Guitar_Tremolos/Wilkinson_Gotoh_VS-100N_Tremolo.html) trem. Drill press would be ideal for the post holes, but you could also just clamp a guide to the body.
  
• LSR nut. Unless you have access to a router jig, I would suggest a rectangular file matching the LSR's dimensions to clean up and deepen the slot you're going to start with a super fine cut saw.
  
• Locking Tuners. Staggered, so no more string trees. Super stable tuning when paired with the Wilkinson and LSR, even after divebombs. Those "F" tuners have a super accurate 18:1 gear ratio. I also like that particular design because they're stabilized with a pair of incorporated pegs that slip into pre-drilled holes, instead of relying on a tiny little screw.
  
  I can't comment on the Gen 4 Noiseless, as I've never used them. My wiring is more like a Les Paul, with dual HB, three way switch and push-pulls for coil splits. This is a pretty good resource for wiring ideas, if you're looking for inspiration. Generally speaking, you'll also want to replace the switches and pots with Switchcraft, CTS, etc. My guess is that the MIM's come with Alpha, but I could be wrong.
  
  EDIT: Keep in mind, when researching wiring diagrams, that "Noiseless" usually means humbucker. It might look like a single coil, but it will be two coils stacked one on top of the other. Check manufacturer specs to confirm whether you're dealing with four or two wires, then plan accordingly.