#2,228 in Audio & video accessories
Use arrows to jump to the previous/next product
Reddit mentions of TISINO 1/4 inch TRS Stereo to Dual 1/4 inch TS Mono Insert Cable Y-Splitter Stereo Breakout Cable Patch Cord - 3.3 feet
Sentiment score: 1
Reddit mentions: 2
We found 2 Reddit mentions of TISINO 1/4 inch TRS Stereo to Dual 1/4 inch TS Mono Insert Cable Y-Splitter Stereo Breakout Cable Patch Cord - 3.3 feet. Here are the top ones.
or
This is an insert cable, generally used for audio consoles or other preamps that have a send/return on the tip/ring of a 1/4" TRS jack. It's a way to insert a component (like a compressor, EQ, etc.) directly inline with a preamp by using a single 1/4" jack.This "Insert" cable intended primarily for mixing/effects insertion applications, but it also can be used as a "Stereo Breakout Cable" since it is wired exactly the same way as a stereo breakout cable.This cable can also be used to split an unbalanced stereo signal into two unbalanced mono signals, or to combine two mono signals into a single stereo signal.The 1/4 TS connectors are color coded Black(Left/Send) and Red(Right/Return), It splits closer to the 1/4 TS ends, the distance to the split point is about 7.5 inches. Please make sure the power for all your equipmant is "OFF" when changing connections.20 AWG 4N OFC Wire, High Density Shielding and Al-foil Shielded to Prevent EMI/RFI Interference ensuring the highest quality audio transfer without static, or popping.Heavy Duty Gold-plated 6.35mm connector resist corrosion, provide durability and improve the signal transmission, ensures minimal signal loss.
Specs:
| Color | Black |
| Height | 0.6 Inches |
| Length | 6 Inches |
| Size | 3.3 feet |
| Width | 5 Inches |
The best way to do this would be to get a headphone amp, such as the Behringer MA400. You would also need a cord that combines two 1/4 inch outputs into one stereo output. Something like this.
Then you route your normal Master Out through one set of outputs (to your speakers), and the other set of outs to your new MA400. Your artist would then be able to use their own headphones and plug into the MA400.
There are several benefits from a setup like this. First of all, the MA400 allows the artist to monitor themselves with zero latency since the input from the mic is heard before it is processed by Reaper. Secondly, you can enable the web interface which allows the artist to customize his/her own monitor mix with their mobile phone or tablet. It would take a bit of configuring on your part, but it's very easy - check out this video to see how it's done.
I currently use this exact setup and it works perfectly. The artist can control their own headphone mix while monitoring with zero latency. The MA400 even passes phantom straight through in case you ever get an interface that has phantom power.
Not sure what kind of mic you have - if it's USB then this is all a no-go.
Dont have this surround sound on mine :(. You have any idea if I can use this cable from the interface to the mixer ? Or is it better to use a 1/4 to XLR ?
https://www.amazon.com/Tisino-Stereo-Y-Splitter-Return-Insert/dp/B07K59P692/ref=sr_1_fkmrnull_1?keywords=Tisino+1%2F4+inch+TRS+Stereo+to+Dual+1%2F4+inch+TS+Mono+Y-Splitter+Cable+Send+and+Return+Insert+Cable+Patch+Cord+-+3+feet&qid=1556567503&s=gateway&sr=8-1-fkmrnull