Reddit mentions of US PeaceKeeper P21111 Small Punch Roll for Armorer's Tools

US PeaceKeeper P21111 Small Punch Roll for Armorer's Tools

It is perfect for my needs and you really can't beat the price.

I got this roll to hold my picks. It’s cheap and works well so far; I love it. US PeaceKeeper P21111 Small Punch Roll for Armorer's Tools https://www.amazon.com/dp/B0044YGCA0/ref=cm_sw_r_cp_api_i_72xaCbSFDPCC6

If money were not a factor, I think Peterson, Sparrows, and Spooxe would be on my list. I can personally vouch for sparrows cases,

I would recommend getting this "small punch tool roll" from Amazon.

US PeaceKeeper P21111 Small Punch... https://www.amazon.com/dp/B0044YGCA0?ref=yo_pop_ma_swf

I use this for most if that. If you’re looking for more of a pouch, Maxpedition was what I always used prior to that. Rytans cordura pouch is excellent, too!!

https://www.amazon.com/US-PeaceKeeper-P21111-Small-Armorers/dp/B0044YGCA0

I use an armorer's punch roll. It was approximately $5, and holds ~20 picks and 10 wrenches with leftover space. Something like this: https://www.amazon.com/gp/product/B0044YGCA0

I use an armorer's punch roll, but am starting to outgrow even it. My wife wants a sewing project so I am going to get her to sew a new one up out of some cotton duck.
https://www.amazon.com/US-PeaceKeeper-P21111-Small-Armorers/dp/B0044YGCA0/ref=lp_3049472011_1_4?srs=3049472011&ie=UTF8&qid=1537540257&sr=8-4

https://www.amazon.com/US-PeaceKeeper-P21111-Small-Armorers/dp/B0044YGCA0

I use receiver blocks purchased from amazon... they work just fine. In the past couple of weeks I've acquired many tools I'd consider essential to the amateur AR builder. Here's what I got so far:

• Schuster Roll Pin Starter Punch Set: These two starters make putting the lower roll pins, gas tube and forward assist so easy. There are better ones out there, but these work just fine and fit the roll pins perfectly for $18.
  
  http://www.midwayusa.com/product/694883/schuster-ar-15-roll-pin-starter-punch-set-2-piece-steel
  
  
• Sears Craftsman 6pc. Roll Pin Punch Set: These are to finish pushing the roll pins in without slipping/mushrooming the pins.
  
  http://www.sears.com/craftsman-6-pc-roll-pin-punch-set/p-00943167000P
  
  
• 6pc Drive Punches from Harbor Freight: These are okay for starting off, but I use a Weaver gunsmithing set... I will upgrade these when I get more money. For now they sit in my punch roll for range repairs.
  
  
• Model 1 Pivot pin installation tool: For $4 you simply cannot beat this tool... I wanted the Wheeler Engineering version, but they were sold out everywhere. This thing really saves your ass when you're putting lowers together.
  
  http://www.midwayusa.com/product/920248/model-1-pivot-pin-detent-installation-tool-ar-15
  
  
• Upper receiver block: This thing works pretty well, but I will upgrade to a hinged one with the insert where the BCG/CH go.
  
  http://www.amazon.com/gp/product/B007LDRXWW/ref=oh_details_o02_s00_i00?ie=UTF8&psc=1
  
  
• Lower receiver/mag block: Great for tightening down castle nuts, installing pivot pins and changing out stocks.
  
  http://www.amazon.com/gp/product/B005J13VCO/ref=oh_details_o01_s00_i00?ie=UTF8&psc=1
  
  
• Tapco/Intrafuse AR-15 Armorer's Wrench: It's nice and has many features that are all labeled by stamping or engraving... the one marked "BEER" is a bottle opener, which is a nice touch. This tool has not let me down yet and although I'm not a fan of Tapco accessories, this thing is great.
  
  http://www.amazon.com/Tapco-Intrafuse-AR-Armorers-Tool/dp/B006PTMYHM/ref=sr_1_1?s=sporting-goods&ie=UTF8&qid=1368590041&sr=1-1&keywords=tapco+armorers+tool
  
  
• US Peacekeeper Small Punch Roll: Very nice way to organize tools for the bench and on the go. It keeps all the AR-15 and pistol tools nice and tidy in my range bag.
  
  http://www.amazon.com/gp/product/B0044YGCA0/ref=oh_details_o00_s00_i00?ie=UTF8&psc=1
  
  
  The only other tools I keep in my bag are a Nylon/Brass hammer & a Lyman screwdriver with common bits in the handle.
  
  I hope you guys can use some of this info for future use... any suggestions are welcome.
  
  

https://www.amazon.com/US-PeaceKeeper-P21111-Small-Armorers/dp/B0044YGCA0/ref=sr_1_fkmr0_1?ie=UTF8&qid=1505416598&sr=8-1-fkmr0&keywords=us+peacekeeper+punch+pouch

Darksim tweeted this a few weeks ago so I picked up one for $8 at the time. I really like it, it rolls up really nice.
US PeaceKeeper Small Punch Roll for Armorer's Tools US PeaceKeeper Products http://www.amazon.com/dp/B0044YGCA0/ref=cm_sw_r_tw_dp_cNTQwb094CJ6B via @amazon

Here are some of my Petersons in it.
https://pbs.twimg.com/media/CZrJLC9VAAAQFIR.jpg:large

This one and this one both have zippered pouches to keep your tensioners secure. I like the first one because the whole things zips closed.

A bunch of people around here, including me, have this one. I would much rather have one of the first two.

​

I honestly don't really use my other picks and wrenches, but I keep them in this case that I bought from Amazon for $4.60 about a year ago (it's gone up a bit since then; used to be an “add-on item”). Basically I just put them all in there when I got that case and haven't opened it since, so I can't really comment on its usability or durability.

what college? I'm a first-year at Oregon state University. BTW if you need a case for your lock picks this one looks pretty good. Mine arrives tomorrow so maybe it's crap but i'll have to wait and see.


https://www.amazon.com/gp/product/B0044YGCA0/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1

https://www.amazon.com/US-PeaceKeeper-Small-Punch-Armorers/dp/B0044YGCA0

It was half that price when I got it a week ago as an add-on item. I'd probably pay the current price still.

Here's some photos:

http://imgur.com/gjFT28Q

http://imgur.com/KXovkL0