#2,153 in Industrial & Scientific
Use arrows to jump to the previous/next product

Reddit mentions of Uxcell a16050300ux0583 M8 304 Stainless Steel Threaded Sleeve Rod Bar Stud Round Connector Nuts Joiner 5pcs

Sentiment score: 1
Reddit mentions: 1

We found 1 Reddit mentions of Uxcell a16050300ux0583 M8 304 Stainless Steel Threaded Sleeve Rod Bar Stud Round Connector Nuts Joiner 5pcs. Here are the top ones.

Uxcell a16050300ux0583 M8 304 Stainless Steel Threaded Sleeve Rod Bar Stud Round Connector Nuts Joiner 5pcs
Buying options
View on Amazon.com
or
    Features:
  • Thread size: M8/0.3"; product Name: round connector nuts
  • Material: 304 stainless steel; weight: 78G
  • Package Content: 5 x round connector nuts; main Color: Silver tone
  • Height: 30mm/1.2"; Pitch: 1.25mm
  • Outside diameter: 12mm/0.47"
Specs:
Height0.47 Inches
Length1.18 Inches
Number of items1
Weight0.17 Pounds
Width0.47 Inches
Related categories:

idea-bulb Interested in what Redditors like? Check out our Shuffle feature

Shuffle: random products popular on Reddit

Found 1 comment on Uxcell a16050300ux0583 M8 304 Stainless Steel Threaded Sleeve Rod Bar Stud Round Connector Nuts Joiner 5pcs:

u/btodoroff ยท 2 pointsr/hoggit

Couldn't find an image of this piece in place to be 100% sure how it works, but looking at it, my suggestion would be two steps:

  1. Clean the part really well with dishwashing detergent, toothbrush, and cotton swabs to get all the grease and oil off, then repair it with a good reinforced epoxy. Use a screw (with a bit of chapstick on the threads to prevent epoxying in the screw), of the same threads to hold the parts in alignment while the epoxy sets. (This'll make sure the threads remain aligned between the two parts to make sure . It'll likely be stronger than the original plastic the part was made of. Once set, remove screw, apply grease in the threads of the plastic part again, and reassemble.
  2. If it fails again, I'd drill out the area around the threaded hole in the clip and epoxy in a threaded rod coupler of the same thread. Something like this: https://www.amazon.com/Uxcell-a16050300ux0583-Stainless-Threaded-Connector/dp/B01IVT9GG0. Alignment will be important, so find a friend with a good drill press or milling machine to drill out the hole to a good fit and alignment.