#3,798 in Toys & Games
Use arrows to jump to the previous/next product
Reddit mentions of Venom 20C 3S 5400mAh 11.1V LiPo Battery with Universal Plug (EC3/Deans/Traxxas/Tamiya)
Sentiment score: 1
Reddit mentions: 1
We found 1 Reddit mentions of Venom 20C 3S 5400mAh 11.1V LiPo Battery with Universal Plug (EC3/Deans/Traxxas/Tamiya). Here are the top ones.
Buying options
View on Amazon.comor
- Battery Type: Lithium Polymer (LiPo)
- Battery Capacity: 5400mAh
- C Rate and Maximum Continuous Discharge (Amps): 20C (108A)
- Plug Type: Venom UNI Plug. Compatible with Traxxas Plug, Tamiya Plug, Deans Plug & EC3 Plug.
- Backed with Proven US Support and Venom's Industry Leading Limited Lifetime Warranty.
Features:
Specs:
Height | 1.75 Inches |
Length | 8.75 Inches |
Number of items | 1 |
Weight | 0.95 Pounds |
Width | 3 Inches |
It's simple really. Do you want a drone you can always rely on and not have to put a lot of work into that gets great results, go buy a p3/4 or mavic, or do you want to spend a lot of time building which for me is half the fun of drones and have a drone that you'll have to work out mistakes and won't be too neat but once you get all the wrinkles out you can put on any gimbal camera, and with apm/pix you can have sonar, osd, telemetry, visua positioning module, gps/glonnas.
Basically for the same price or a little bit less you can build a drone that's just as good as the p3a/s with a GoPro and transmitter
Here's the part list for what you need to build a good filming diy quadcopter. I assume you already have a computer and transmitter. All of these are amazon prime items and eBay items with fast and free shipping. The best thing is that you don't need to solder anything, of course you could get variants of the parts that are cheaper but requires soldering by this way there's a lot less wires and clutter and you should be getting a 10-15 minute flight time
Usmile S500 PCB Quadcopter Frame Kit with Landing Gear
https://www.amazon.com/dp/B013YENQ2W/ref=cm_sw_r_cp_tai_MbZtzbBD5AAV5
30$
Motors 920 kv
https://www.amazon.com/dp/B01HM8EXJG/ref=cm_sw_r_cp_tai_edZtzb0VN0YF3
30&
Escs 4 in 30aX4
https://www.amazon.com/dp/B018A6K2SA/ref=cm_sw_r_cp_tai_zfZtzbC2VZBZ6
40$
16x 1045 props
https://www.amazon.com/dp/B01LZGJNAL/ref=cm_sw_r_cp_tai_BhZtzb7A38NV2
15$
Venom 5400 20c 3s lipo
https://www.amazon.com/dp/B000W7PZU6/ref=cm_sw_r_cp_tai_7mZtzbMKEHH7P
60$ but it's worth every penny
Apm 2.6 flight controller
https://www.ebay.com/itm/232151137887
30$
Apm power module
https://www.ebay.com/itm/231617302003
10$
Apm shock absorber
https://www.ebay.com/itm/321765065426
5$
Ublox neo m8n gps+glonass (great gps)
https://www.ebay.com/itm/252133458960
20$
Apm telemetry
https://www.ebay.com/itm/221783168543
20$
Apm osd
https://www.ebay.com/itm/132062166617
10$
3 axis gimbal for GoPro (I'd recommend tuning first)
https://www.ebay.com/itm/281776499167
60$
Fpv tx/rx
https://www.ebay.com/itm/281897786845
30$
Fpv good antennas
https://www.ebay.com/itm/122035038453
10$
$370 build total
I'd also recommend getting a GoPro to use with this
And if you want to get really advanced you can create a portable ground station to use with the drone while it's flying consisting of an Android tablet with gps which lets you do follow mode
https://www.ebay.com/itm/231894739709
Otg cable to connect to telemetry
https://www.ebay.com/itm/152247474853
This will let you control the drone using the tablet as if it was a computer running the apm app. There are a few good articles about it online if you search for it, or you could just get a small laptop
Even more advanced you can get sonar for apm and visual positioning models to make it like the phantom 4 and be really stable hovering