Reddit mentions: The best metallic paper & foils
We found 3 Reddit comments discussing the best metallic paper & foils. We ran sentiment analysis on each of these comments to determine how redditors feel about different products. We found 3 products and ranked them based on the amount of positive reactions they received. Here are the top 20.
1. 3" 400ft 2 x 200 Ft Rolls 1 Gold and 1 silver KINGSLEY HOWARDBW88-100E200E
- Set of 2 Hot Foil Stamp Rolls
- Brilliant Metallic Gold and Silver
- 400 Ft, 2 Rolls 200 Ft each
- Perfect for imprinting items, including our lenticular promotional items
- Can be printed onto the following substrates: ABS, Acrylic, Acetate, Butyrate, Cloth, Cellophane, Delrin, Felt, Lacquered Wood, Leather, Laminated Plastic, Mylar, Nylon, Polyurethane, Polystyrene, PVC, Pyroxilin, Plexiglass, Paper, SAN, Satin, Suede, Rigid Vinyl
Features:
Specs:
Color | Gold Silver |
Size | 3" Wide 200 Feet |
2. St Louis Crafts 38 Gauge Aluminum Foil - 12 Inches x 25 Feet - Copper Roll Only
- Economically priced to fit your budget
- An essential for detectives, forensic scientist or criminology students
- Long-lasting product will remain useable for 12+ months
- Bright red coloring for bold, accurate prints
Features:
Specs:
Color | Coppertone |
Height | 1.3 Inches |
Length | 12 Inches |
Number of items | 1 |
Size | 12 in x 25 ft - 38 ga |
Width | 1.4 Inches |
3. iCraft Deco Foil Transfer Sheets, 6" x 12", Silver, 20 Piece
A fun and creative way to add vibrant color, brilliant shine and a metallic or satin finish to any projectUse on paper, fabric, wood or other porous surfacesUse with iCraft Deco Foil adhesives (gel, pen, toner sheets, liquid, foam, spray and hot melt sold separately)Washable on fabrics20 Sheets of 6...
Specs:
Color | Silver |
Height | 13 Inches |
Length | 6 Inches |
Number of items | 1 |
Size | 6" x 12" |
Weight | 0.1 Pounds |
Width | 0.06 Inches |
🎓 Reddit experts on metallic paper & foils
The comments and opinions expressed on this page are written exclusively by redditors. To provide you with the most relevant data, we sourced opinions from the most knowledgeable Reddit users based the total number of upvotes and downvotes received across comments on subreddits where metallic paper & foils are discussed. For your reference and for the sake of transparency, here are the specialists whose opinions mattered the most in our ranking.
Hopefully the trials and tribulations I've gone through will help you out in this setup. If do or are planning on making a lot of items that will need to be embossed or have a foil stamp put on them I would advise to getting a specific press for this. It may cost more but it will be much more effective, less time consuming and most of all far less error prone. Nothing worse than making a great item and them it all going to hell when you mess up the press action. I've done this before with my setup.
At present I use a heat gun that has heat control on it. Found mine at home depot in the paint section. The press I use is an arbor press I found on Amazon that has a flat press attachment I found on etsy. I use the flat press attachment for use with my clicker dies. I'm primarily pressing my logo into items with my setup.
As for the foil, I found my stuff (Silver and Gold) on Amazon as well. Here is what I use,
https://www.amazon.com/400ft-Rolls-silver-KINGSLEY-HOWARDBW88-100E200E/dp/B010C2DI1S/ref=pd_sim_229_5?_encoding=UTF8&pd_rd_i=B010C2DI1S&pd_rd_r=ead3c1b3-b2b9-11e8-b9b0-b9c4745829eb&pd_rd_w=1hXze&pd_rd_wg=QZ52C&pf_rd_i=desktop-dp-sims&pf_rd_m=ATVPDKIKX0DER&pf_rd_p=18bb0b78-4200-49b9-ac91-f141d61a1780&pf_rd_r=S29ZDWW74S4XYT7MEEBR&pf_rd_s=desktop-dp-sims&pf_rd_t=40701&psc=1&refRID=S29ZDWW74S4XYT7MEEBR
I think its good to mention that depending on the stamp design you could trap some of the foil within the stamp and due to the heat and tension being pushed down onto the stamp and foil you could cause more of the foil to bond to the leather. So you will not only get colored lettering that you want but the foil will bond to the leather around the lettering. Hopefully that made sense.
As I searched for the foil I use I came across this machine. I'm thinking of getting it.
https://www.amazon.com/inch-Stamp-Rolls-KINGSLEY-HOWARD/dp/B018VEGLZO?th=1
I hope this info helps.
Good luck.
You did fantastic work!
I've never worked with copper but can't help but wonder if you could get the blue patina method to work with something much thinner, like 38 gauge foil type of roll.
Do you know if it would work the same? I mean, if you're epoxying over the top of it, would it really matter how thick the copper was?
Use a conventional laserjet printer on low-acid paper. Laminate silver foil onto the paper.
Therm O Web Deco Foil (Pack of 20), Silver https://www.amazon.com/dp/B00UY14UBA/
The foil sticks to the toner. Peel the foil up. Burn the paper (silver on paper copy) and keep the silver (punched out letters in silver).