Best products from r/GalaxyS7
We found 204 comments on r/GalaxyS7 discussing the most recommended products. We ran sentiment analysis on each of these comments to determine how redditors feel about different products. We found 453 products and ranked them based on the amount of positive reactions they received. Here are the top 20.
1. Spigen Rugged Armor Designed for Samsung Galaxy S7 Edge Case (2016) - Black
- New look featuring glossy accents and carbon fiber textures
- Flexible TPU case with interior spider-web pattern & Raised lip of 1.2mm protects screen
- Air Cushion Technology for shock absorption
- Tactile buttons for solid feedback and an easy press
- Galaxy S7 Edge Case Compatible with Samsung Galaxy S7 Edge (2016)
Features:
2. ArmorSuit MilitaryShield Screen Protector Designed for Samsung Galaxy S7 Edge Case Friendly Anti-Bubble HD Clear Film
Precise laser cutting Armorsuit MilitaryShield Case Friendly screen protector for Samsung Galaxy S7 Edge [Not Tempered Glass]Ultra HD Clear and amazingly thin, perfectly matches the contours of your device. Easy application with flexible material is designed for maximum full coverage on curved corne...
3. SUPCASE Unicorn Beetle Pro Series Case Designed for Galaxy S7 Edge, Full-Body Rugged Holster Case Without Built-in Screen Protector for Samsung Galaxy S7 Edge (2016 Release) (Black/Black)
Precisely designed for Samsung Galaxy S7 edge (2016). provides full access to phone ports, functions and sensitivity.Built for heavy use, and perfect for the outdoors. Advanced Dual layer designed case combined of polycarbonate hard shell and flexible TPU withstands accidental drop, bump and shock36...
4. SUPCASE Unicorn Beetle Pro Series Case Designed for Galaxy S7, with Built-In Screen Protector Full-body Rugged Holster Case for Samsung Galaxy S7 (2016 Release) (Black/Black)
- Precisely designed for Samsung Galaxy S7 (2016, Not fit Samsung Galaxy S7 Edge). Provides full access to phone ports, functions and sensitivity.
- 360 degree swiveling belt clip holster for carrying convenience
- Precisely designed for Samsung Galaxy S7 (2016). provides full access to Phone ports, functions and sensitivity.
- Protective Front casing with built in bubble free screen protector enhances touch sensitivity
- Durable protection in sporty design, available in multiple colors
Features:
5. Spigen Rugged Armor Designed for Samsung Galaxy S7 Case (2016) - Black
- New look featuring glossy accents and carbon fiber textures
- Flexible TPU case with interior spider-web pattern & Raised lip of 1.2mm protects screen
- Air Cushion Technology for shock absorption
- Tactile buttons for solid feedback and an easy press
- Galaxy S7 Case Compatible with Samsung Galaxy S7 (2016)
Features:
6. Spigen Thin Fit Designed for Samsung Galaxy S7 Edge Case (2016) - Black
A Samsung Galaxy S7 Edge Case Compatible with Samsung Galaxy S7 Edge (2016)Hard case made from premium polycarbonate & Feels case-less and bare for a natural impressionExposed buttons and port openings for quick and easy accessFor Smooth Black Only: Soft finish coating provides grip and a matte-fini...
7. Galaxy S7 Case, SUPCASE Unicorn Beetle Series Premium Hybrid Protective Clear Case for Samsung Galaxy S7 2016 Release, Retail Package (Frost/Black)
Compatible only with Samsung Galaxy S7 (2016)Slim, form fitting, minimalist design with transparent back, defined edges and smooth finishMade of shock absorbing high grade TPU and PC materials, available in multiple colorsAll Phone Features, Buttons and sensitivity are accessible and easily operated...
8. ArmorSuit MilitaryShield Screen Protector Designed for Samsung Galaxy S7 Case Friendly Anti-Bubble HD Clear Film (Not for S7 Edge)
Precise laser cutting Armorsuit MilitaryShield Case Friendly screen protector for Samsung Galaxy S7 (NOT Compatible with Samsung Galaxy S7 Edge)Ultra HD Clear and amazingly thin, perfectly matches the contours of your device. Easy application with flexible material is designed for maximum full cover...
9. Spigen Thin Fit Designed for Samsung Galaxy S7 Edge Case (2016) - Gunmetal
- Defined fit keeps device slim and lightweight
- Hard case made from premium polycarbonate & Feels case-less and bare for a natural impression
- Exposed buttons and port openings for quick and easy access
- For Smooth Black Only: Soft finish coating provides grip and a matte-finish
- Galaxy S7 Edge Case Compatible with Samsung Galaxy S7 Edge (2016)
Features:
10. SanDisk Ultra 200GB Micro SD (SDSDQUAN-200G-G4A)
- MicroSDXC form factor
- Performance/speed:Up to 90MB/s read speed, write speed lower)
- Capacity: 200GB
- Class 10 for Full HD video (1920x1080)
Features:
11. IQ Shield Screen Protector Compatible with Samsung Galaxy S7 Edge (Case Friendly) LiquidSkin Anti-Bubble Clear Film
The IQ Shield (Case Friendly) Screen Protector compatible with Samsung Galaxy S7 Edge includes our proprietary screen protector, installation tray or spray solution, squeegee, lint-less cloth, and intuitive installation instructionsInnovative anti-bubble LIQuidSkin adhesive coupled with our unique I...
12. Fast Wireless Charger, PLESON Fast Charge QI Fast wireless Charging pad [Sleep-friendly] Backward Compatible with all Standard Qi-enabled devices (Fast Wireless Charger C500)
- 【Wireless Fast Charge】Up to 1.4x faster than standard wireless charging pads, reducing total charging time from 0-100% by up to 50 minutes! Please use QC 2.0 or Samsung original adapter and cable to enable fast charge feature. (Not including the AC adapter)
- PLESON C500 fast wireless charger is a smart widget with intelligent identification function. [FAST MODE with Green LED]: QC 3.0 AC adapter needed, is ONLY available for the Samsung Galaxy S9 Plus, S9, Note 8, S8, S8 Plus, S7, S7 Edge, S6 Edge Plus, Note 5 (NOTE: Samsung S9 Plus and S9 OEM AC adapter CANNOT SUPPORT fast wireless charging); [STANDARD MODE with Blue LED]: Using 5V 2A adapter, supports iPhone X, iPhone 8, iPhone 8 Plus and other Qi-enabled devices like LG V30/G6, Google Nexus 5/6.
- No beep, No annoying lights. Humanized design of LED indicator. LED indicator will automatically turn off after working 10 seconds. Without any distraction caused by indicator and giving you a good sleep. Built-in over-voltage, undervoltage, and short-circuit protection provides ultimate safety for your smartphone.
- QC 2.0 Adaptive Fast Charger is required for the fast charge wireless charging feature, please use QC 2.0 adapter as its power source. (Not including the AC adapter in the package)
- HASSLE-FREE WARRANTY We promise 60 days FULL MONEY BACK GUARANTEE
Features:
13. Spigen Thin Fit Designed for Samsung Galaxy S7 Case (2016) - Black
Defined fit keeps device slim and lightweightHard case made from premium polycarbonate & Feels case-less and bare for a natural impressionExposed buttons and port openings for quick and easy accessFor Smooth Black Only: Soft finish coating provides grip and a matte-finishGalaxy S7 Case Compatible wi...
14. AquaAudio QZ-2Q0H-R3GO Cube Waterproof Bluetooth Wireless Speaker with Suction Cup and Built-in Mic for All Bluetooth Media Devices (Black)
- Amazing clarity, deep bass and super rich sound. With the hottest sound optimizer technology experience your music while in the shower like never before!
- The ‘Auto Pairing’ feature connects your device automatically to the speaker. Connects wirelessly to your smartphone, tablet or any other Bluetooth device. Plus it connects to Siri. / New Bluetooth v3.0 Technology allows you to connect wirelessly up to 50 feet away.
- Adjust the volume and switch song tracks directly from the Bluetooth speaker. Speaker doubles as a hands-free speakerphone; click the ‘Answer call’ button on the speaker and chat directly through the built-in microphone.
- Installed rechargeable lithium-ion battery delivers up to 10 hours of playing time on a single charge. Charges fully in just 2.5 hours / Rechargeable via USB cable (included).
- Modern Sleek design and features a powerful suction cup; just attach it to any flat surface, such as tiled walls, glass, etc. / Dimensions: 3 inch x 3 inch / Speaker power: 3-watts
Features:
15. iOttie Easy One Touch Wireless Qi Standard Car Mount Charger for for iPhone X, 8/8 Plus, Samsung Galaxy S9 S9 Plus S8, S7/S7 Edge, Note 8 5 & Qi Enabled Devices
- Qi wireless standard charging compatible with QI wireless enabled devices such as samsung galaxy s8, s8 plus, s8 note, s7, s7 edge. I iphone 8, 8 plus, x
- Offers an easy one touch lock and release mounting system that locks the device into the holder with just the push of a finger
- Fits devices from 2.3 to 3.3 inches wide
- Includes a micro USB charging cable to provide power to the mount as well as a dashboard pad for mounting on almost all types of surfaces (please note, most likely will not work on leather/ vinyl dashboards)
- Employs a telescopic arm to allow for better viewing angles for users with a 17 millimeter ball joint at the end to attach the mount to the base
- Please make sure to not leave in the sun too long while not in use
- For samsung & iphone users please bring down the bottom foot of your easy one touch wireless to allow for a seamless charge
Features:
16. Spigen Ultra Hybrid Designed for Samsung Galaxy S7 Edge Case (2016) - Crystal Clear
- Clear back panel + TPU bumper for Galaxy S7 Edge
- 1.2mm raised lip and 4-point rear guards protect front and back from flat surfaces
- Embossed buttons for an easy, conspicuous press for Galaxy S7 Edge
- Air Cushion Technology (Military-Grade Protection MIL-STD 810G 516.6)
- Samsung Galaxy S7 Edge Case Compatible with Samsung Galaxy S7 Edge (2016)
Features:
17. Spigen Neo Hybrid Crystal Designed for Samsung Galaxy S7 Case (2016) - Gunmetal
2 Piece Flexible TPU + Hard PC Exterior Bumper FramePrecise cutouts compatible with most cablesInterior dotted buffer prevents smudges & Clear casing for a minimalist look and clarityRaised lip and camera cutout offer lens & screen protectionGalaxy S7 Case Compatible with Galaxy S7 (2016)
18. IQ Shield Screen Protector Compatible with Samsung Galaxy S7 Edge (Full Coverage) Anti-Bubble Clear Film
The IQ Shield Screen Protector compatible with Samsung Galaxy S7 Edge (Full Coverage) includes our proprietary screen protector, squeegee, cloth, and intuitive installation instructionsInnovative adhesive coupled with our unique application method ensures easy, anti-bubble and a frustration-less ins...
19. Aukey 3.1Amps / 15W Dual-port Rapid USB Car charger Designed for Apple and Android Devices
Multi-function: You will be able to charge your phone and listen to music with a headphone / earphone at the same time using the adapterEfficient transmission and stable signal : 100% Copper wire core offers digital sound quality and ensure the stability of the transmission. You just need to plug an...
20. Spigen Tough Armor Designed for Samsung Galaxy S7 Edge Case (2016) - Black
- Shock-absorbing TPU interior + polycarbonate exterior with kickstand for hands-free viewing
- Air Cushion Technology (Military-Grade Protection MIL-STD 810G 516.6)
- Large cutouts fit most cables while protecting the phone and camera
- Raised lip of 2.0mm protects screen
- Galaxy S7 Edge Case Compatible with Samsung Galaxy S7 Edge (2016)
Features:
I got this case http://www.amazon.com/Spigen%C2%AE-Resilient-Ultimate-protection-impacts/dp/B01A7ICWTQ?ie=UTF8&psc=1&redirect=true&ref_=oh_aui_detailpage_o04_s00 and it works awesome and I cannot complain about it one bit. It doesn't add tons of bulk, but it has decent grip and can easily slide into a shirt or jeans pocket without issues.
I did try a couple of tempered glass screen protectors but I returned them immediately. I really like Sparin glass protectors on my other tablets/phones but it is absolute garbage on my S7. I'm not sure if there are many out there yet, but there should be some coming up by the end of this month that will fit to the curved edges on the regular S7. My problem was that the glass would overlap the curve and there was 1/4 inch on each side that were not in contact with the screen. That meant whenever I had to pull something from the side it just wouldn't work.
I currently am using the IQ Shield http://www.amazon.com/Galaxy-Protector-Coverage-Shield%C2%AE-LiQuidSkin/dp/B019S70NJI?ie=UTF8&psc=1&redirect=true&ref_=oh_aui_detailpage_o02_s00 LiQuidSkin screen protector and it works great. I would highly recommend getting the "Case Friendly" version as the regular version will pop up on the corners when you put it in a case. Feel wise, it's smooth. With the screen off you can see a bit of an "orange peel" look, but it's not noticeable with the screen on. It is a wet application and I put it on after steaming up my bathroom using the shower to reduce dust in the air and it applied super easy and perfect.
I'll eventually get a good tempered glass screen protector, but this does the job of preventing scratches for now.
I've always loved Spigen. I've got the Spigen Tough Armor in black. It looks great and protects my phone without getting in the way of the edge screen. Also, that kickstand is fucking amazingly useful. I use it all the time to watch videos or even to help take photos with a timer. I've also used it to prop my phone overlooking a pack-n-play so that we can use my phone as a baby monitor when traveling. It's got great protection, looks great, and actually makes the S7E easier to use.
I suggest you get a good case for the phone first. As I've seen in the comments, you like to have drop protection, therefore I give you: the spigen rugged armor https://www.amazon.com/Spigen-Rugged-Resilient-Absorption-Samsung/dp/B01A7IDHOU
This case will give you the best of drop protection and won't add bulk to it, plus it will work with most screen protectors out there and offers also protection on the edges.
As for other things, I like to keep the edge screen for apps edge only. This way I can fit in some apps that I use on a regular basis and I don't want to put too much on the home screen. The transparency setting to full hides the setting very well.
Of course, at first get to know your device and learn to appreciate the things that come with it. I suggest you should make it up for yourself whether you like the features the edge screen brings along or not.
You should go into your edge screen settings and disable yahoo or other news that will show up in your "briefing feed". However, I did not disable the Briefing feed which shows me 3rd party notifications when i swipe on the edges, as I find this very useful in meetings or when the phone just sits at my desk.
For battery life's sake, go to settings, wi-fi, and find the feature "scan for nearby devices". I disabled that because it just drains battery. Then, go to location settings, select "improved accuracy", and disable wi-fi or bluetooth settings. After that, you go to battery settings and scroll down to "app power saving". Set the apps you dont want to be running wild in the background to "always save power". Samsung will turn apps into this mode after 3 days, but you can set it that apps like games for example don't fetch for notifications all the time etc. Last, but not least, tap that build number and you can find the option "inactive apps" in your developer settings. You can toggle apps that you cant deactivate nor uninstall to be inactive so that they don't waste power.
I hoped I could help you out. If you need anything else, this or the r/s7edge subreddit has a lot of informations.
Gratz!
I used this one for 6 or 7 months before I dropped it and it cracked the corner of the case. Saved my phone but it wouldn't stay in the case anymore. III prefer this one because it only adds 2mm of thickness (check out the description) and a ton of grip. It's made of plastic, but the texture will fool you.
After that, I had this lying around after a sale. It's just rubbery, super grippy, and still pretty minimal. Plus now I can see my dbrand skin lol. Definitely keeps my palms off the edge though.
Before this phone I didn't like cases either, so I really can't recommend any of those premium cases because they add too much thickness. Spigen is a reputable case maker too, and they have their own metal cases if you're interested. Good luck!
The phone doesn't have a UHS-II interface, so the answer is your current card is fine.
I haven't used that case so I don't know about that. I use this:
http://www.amazon.com/Spigen%C2%AE-Exact-Fit-Gunmetal-Premium-Samsung/dp/B01AUR0NZE?ie=UTF8&psc=1&redirect=true&ref_=oh_aui_detailpage_o03_s00
Spigen Exact Fit. I love it, it's thin, I can use the real phone buttons, and it's got very nice grip. Also super quick and easy to remove. However it certainly is not as protective as most other cases. A tradeoff I'm willing to make.
http://www.amazon.com/gp/product/B01CURN9UI?psc=1&redirect=true&ref_=oh_aui_detailpage_o01_s00
All of this stuff can be bought on Amazon. I just get pre-release for product testing/review purposes.. but Amazon is showing that it's available right now, I think?
Edit:
Looks like they have one for the matte version, too!
http://www.amazon.com/Shield%C2%AE-Matte-Replacements-Bubble-Free-Anti-Fingerprint/dp/B01CYRIJBI/ref=sr_1_11?s=wireless&ie=UTF8&qid=1458227243&sr=1-11&keywords=iq+shield+s7
I definitely prefer the matte over the clear. You also see less dust if you installed it poorly :)
I have had this after a few days of owning it, it's been over 6 months and it's holding great, it's starting to peel on the bottom left edge from taking it out of the case but I'm. Very happy with it! I got the matte version but I suggest anyone to buy the clear version. I got the back also, it must be flawless if I ever decide to remove them
Armor suit is my favorite after trying many. Overall, most the decent wet install shields are fantastic.
https://www.amazon.com/gp/aw/d/B01ACXSKAG/ref=mp_s_a_1_3?ie=UTF8&qid=1501349894&sr=8-3&pi=AC_SX236_SY340_FMwebp_QL65&keywords=s7+edge+screen+protector&dpPl=1&dpID=51WtCcEuicL&ref=plSrch
For a case, the Spigen Tough Armor is really nice in the protection it gives, it your phone still looks sleek as hell.
https://www.amazon.com/gp/aw/s/ref=a9_asi_1?rh=i%3Aaps%2Ck%3As7+edge+spigen&keywords=s7+edge+spigen&ie=UTF8&qid=1501349942
As for the one you bought, go back to the store and demand your money back. Should be pretty easy. Tell them you were told by an associate that it'd work perfectly, and it was garbage. If it's a retailer like Wal-Mart, you'll definitely get it back. If you got it through a wireless store like verizon, well... it'll be tougher. You'll probably have to call them out on their shit, demand corporate numbers so you can complain, etc. (Maybe you'll get lucky though.)
Best to leave it alone haha.
The phone is so beautiful and a joy to hold, but after this, I bought a case to cover up the nick/chip/scruff. It became a tank but I love it more. With this frame + my case, it's pretty much unbend-able!
My case is a Supcase Pro if you are wondering.
I am a huge Spigen fan, but I got the one you listed and I don't like it. It really looks rubbery and makes the phone look cheap. I truly love this Spigen case though. I bought a bunch of cases and now use it exclusively (I got the gold because my phone is gold)
http://www.amazon.com/dp/B01B1I6J0E/ref=twister_B01B297RG2?_encoding=UTF8&psc=1
I also like this one http://www.amazon.com/Spigen%C2%AE-Resilient-Ultimate-protection-impacts/dp/B01A7ICWTQ/ref=sr_1_3?ie=UTF8&qid=1463344407&sr=8-3&keywords=galaxy+s7+spigen+case
i have two cases i got from this sub due to using a coupon code.
the first was the Spigen Neo Hybrid
http://smile.amazon.com/Spigen%C2%AE-Crystal-PREMIUM-Gunmetal-Premium/dp/B01AUORG7K
I think i got that one for $2 instead of the advertized $5 due to some pricing glitch.
It was fine but a little bulky. and the way the edges were cut, it wasn't as smooth feeling in the hand as the naked phone....which i get. you want protection. but i just felt like there could be something better. Also, it didnt work with my existing old Nexus 5 wireless charger, so that made me sad.
the other was an Anker Slim Shell i think was like 1 cent on prime.
http://smile.amazon.com/Anker-SlimShell-Galaxy-Ultra-Thin-Transparent/dp/B01C77U7QU
this is what i have currently on my phone. Gives me back the feel of my phone, works on my wireless charger. i'm happy with it.
Check out this case
I used Spigen slim armor before it and noticed the case gets scratched very easily and buttons are not as noticeable.
The Unicorn Beetle case is currently my favorite as it has amazing grip, protection and looks great! (Comes in multiple colors)
[Screen protectors also work with this case.]
No! Trust me, I've tried that! I tried cutting a S7 Edge protector to fit an S7 and ended up tossing it away. They don't cut at all, they stretch and fight and end up distorted and ruined.
And I'm not sure where you're from, but Amazon has those screen protectors for cheap. Like $7 USD cheap. Most in-store protectors over here are like $20!
ArmorSuit
IqShield
Skinomi
The issue with the iOttie is that it is not fast wireless charging, but they do have a new version out.
I replaced my iOttie https://www.amazon.com/iOttie-HLCRIO132-Wireless-Standard-Charger/dp/B00UXS7958/
with this one - dodocool Qi Wireless Charger 10W 3-coil Fast Wireless Charging Car Mount: https://www.amazon.com/gp/product/B06XD7WJDL/
The dodocool has a goofy name but works well. It is able to charge my phone while using Spotify and Google Maps at the same time. FYI Waze does seem to use a bit more juice than Google Maps.
Also, I like how it has the vent clip style mount included as I never have had any luck with the suction cup base mounts staying put after a hot day.
Alright I got a technical question.
I ordered a SanDisk Extreme PRO 64GB link
Read: Up to 95MB/s
Write: Up to 90MB/s
So won't this be ideal for a snappy phone speeds from an SD card for both 4k and general use?
---
Compared to the current offer Actual amazon link
The product description doesn't give a clear indication of write speeds (vs the 1st product I listed) but from the useful Amazon Comments I got:
Sequential Read : 45.93 MB/s
Sequential Write : 14.7 MB MB/s
^(thanks /u/ekol for the correct read/write speeds)
So wouldn't the 64gig Extreme pro be ideal for 4k recording and general speediness?
https://www.amazon.com/dp/B01D8D5NCA/ref=cm_sw_r_cp_awdb_t1_Kx.NBbS4HBKCR
This is the one I have. Much cheaper than oem samsung and works just as good. Supports fast wireless charging, has a good design, led doesnt stay on the whole time (good if you charge at night), and the company has good reviews for support and warranty.
I have this and am reasonably happy with it:
https://www.amazon.com/gp/product/B00UXS7958
It isn't magnetic, but it is quick and easy to insert and remove. To put the phone, you simply push it against the back and the jaws snap shut. To remove it, you press on the right and left side bars sticking out, and that pushes the jaws open, which then lock.
With music playing via bluetooth and the screen on displaying Google Maps for navigation, charging is kind of a break-even thing. During the day, when auto-brightness is cranking the screen up, I slowly lose charge (like 1% per hour). At night, when the screen dims and Maps goes into night mode, I gain a few percent per hour.
Occasionally, when I leave my car in direct sun for long periods of time, I come back to find the suction has released and have to re-attach it, but this isn't a big deal.
It looks like the price has gone up. I paid $36 for it in August 2016.
I honestly cannot say anything bad about this case. Provides great protection while staying very thin. Everything is snug and cutouts are perfect.
http://www.amazon.com/SUPCASE-Full-body-Holster-WITHOUT-Protector/dp/B01BLI4FWI/ref=sr_1_2?ie=UTF8&qid=1458924224&sr=8-2&keywords=galaxy+S7+edge+supcase+unicorn
I've had this case for a few months now and it's pretty great. Not bulky at all, protects the phone from basic falls, and it's easy to hold.
https://www.amazon.com/Spigen-Rugged-Resilient-Absorption-Samsung/dp/B01A7ICWTQ/ref=sr_1_8?ie=UTF8&qid=1496504753&sr=8-8&keywords=samsung+galaxy+s7+case
https://www.amazon.com/gp/product/B01A7IDCC2/ref=oh_aui_search_detailpage?ie=UTF8&psc=1
I use this one on my S7 Edge. I think it's probably close to what you are looking for. It's got kind of a rubber/grippy texture to it and I love it, never have a problem with it slipping out of my hand. It's definitely a slim fit so not a ton of protection but I rarely if ever drop my phone so just wanted something with basic protection and good grip.
Edit: Found an S7 version:
https://www.amazon.com/Spigen-Galaxy-Surface-Excellent-Samsung/dp/B01A7ICRLO/ref=pd_sim_107_2?_encoding=UTF8&pd_rd_i=B01A7ICRLO&pd_rd_r=2Q03T88Y90HKY652YP5B&pd_rd_w=KpxA3&pd_rd_wg=GVPJj&psc=1&refRID=2Q03T88Y90HKY652YP5B
I got the Tough Armor, but those look good as well. The kickstand on the Tough doesn't exactly look that sleek, but it's functional enough. I've had a few Diztronic cases in the past as well. Nice and simple.
I have the 200GB Sandisk UHS-1 card, which is 90MB/s. Not the fastest, that was way out of my price bracket, but I'm guessing at least one of the most popular due to the heavy discount when the S7 got announced. Once I find out the best way to benchmark before/after enabling adoptable I'll report back.
I use an ArmorSuit screen protector for my S7 because it works well with cases.
It's not a traditional screen protector. It's more of a rubberized plastic that sticks to it. They're easy to put on and have a lifetime warranty on each of them. If you ever need a new one you just need to pay $2 for shipping. I would totally recommend them.
*edit: They also adhere to the curves of the phone. I have installed one of these on both a Galaxy S8+ and Galaxy S9+ and they adhere to the curves perfectly.
It's the Galaxy S7 Edge Case, Spigen® [Ultra Hybrid] AIR CUSHION [Crystal Clear] Clear back panel + TPU bumper for Samsung Galaxy S7 Edge (2016) - (556CS20034)
http://www.amazon.com/gp/product/B01A7IDKMO?psc=1&redirect=true&ref_=oh_aui_detailpage_o04_s00
Essentially I got two of them. Obviously I don't need two cases. Amazon wouldn't let me cancel one. USPS shipping tends to be about $3 in the US. So For $6 I can send you one, with tracking number. PM me.
This one is a hard plastic back with a grippy TPU side. Doesn't interfere with using the edge. The sides are still pretty grippy, the back is more protective hard plastic rather than bendable grippy like the LUVVITT. But it does show off the back better (the LUVVITT has a matte texture so it doesn't give a wet look).
I have this one, and I love it! Makes it have similar dimensions to the s6 active. It's pretty sturdy also.
http://www.amazon.com/gp/aw/d/B01BLF3OLO/ref=mp_s_a_1_2?qid=1459028713&sr=8-2&pi=AC_SX236_SY340_FMwebp_QL65&keywords=supcase+s7
I love my NiteIze Steelie mount. I use it multiple times a day. It is fast, low profile and holds up to my spirited driving. I dismantled my Qi charger to get the phone as close as possible.
It turns out the magnet on the Steelie is so strong, it will interfere with the induction charging.
FYI: I did a test without the case or magnet. I placed 5 Millimeters of paper between the phone and charger and the wireless charging still worked fine.
Edit: Here are product links:
I've only ever used this case but it seems pretty solid and has a lot of good reviews to boot:
https://www.amazon.co.uk/gp/product/B01A7IDHOU
I just put this on my S7E a few nights and am happy with it. It's a wet application, but after watching the installation visits it was pretty simple.
Samsung Galaxy S7 Edge Screen Protector [Case Friendly], Armorsuit MilitaryShield w/ Lifetime Replacement - Anti-Bubble Ultra HD Premium Shield - Clear https://www.amazon.com/dp/B01ACXSKAG/ref=cm_sw_r_cp_apa_9xKHxbJP78T43
Spigen Rugged Armor. Very happy with it. Not too bulky, but solid protection. Good quality, well made case.
https://www.amazon.com/Spigen-Rugged-Resilient-Absorption-Samsung/dp/B01A7ICWTQ
I've never had luck with screen protectors with curved screens so I don't use them.
As far as cases go, I've found Caseology cases like this one and Spigen cases like this one don't add much bulk and keep it feeling pretty thin. Anything with a kickstand is gonna feel super thick.
This is the chap I use. The 'Spigen', its easy to get on and off, but not loose at all. Fits like a glove and doesnt feel overly bigger then not having the case.
BUt then I got mine mainly for gentle chips and corner / side bumps. Plus its hard to hold the edge without touching the actual edge screen! So this helps no end with that too!
I have the S7 edge, so good screen protectors are hard to come by because they're prone to come up around the edges. The best protector I have ever used on any phone is the Armorsuit MilitaryShield.
It uses a wet application process so you will need to power down your phone overnight while it dries. I recommend watching a YouTube tutorial when applying it. The end result is a smooth, bubble free protector that you can barely tell is there.
GS7 version:
https://www.amazon.com/Armorsuit-MilitaryShield-Protector-Anti-Bubble-Replacements/dp/B01ACXRS6I/ref=sr_1_1?s=wireless&ie=UTF8&qid=1485534830&sr=1-1&keywords=Armorsuit+MilitaryShield
I have this and it is awesome.
This one is good too for those who like slimmer cases
I use that protector and it's great, no trouble installing at all. Take your time and DON'T worry about the small bubbles and blemishes that you see when you first finish. After about 12 hours most were gone and after 24 hours it looked perfect, not a single bubble.
I used Spigen neo hybrid for a bit, but just switched to their thin fit https://www.amazon.com/dp/B01AUR0NZE and love it. Protection may not be the best, but I worry more about scratches on the case and screen then drops. Minimal size increase over stock phone, AND it fits over the Slickwrap decal that I have on the phone, in case I take the case off.
this is the case I have and I love it so much, has a built in screen protector (plastic) that protects the phone from scratches, which you will get if you put your phone in your pocket or purse, it doesn't make the phone too bulky and adds a ton of grip too. I like to add that the built in protector doesn't mess with the touch sensitivity.
https://www.amazon.de/SUPCASE-Schutzh%C3%BClle-eingebautem-Displayschutz-schlagfesten/dp/B01BLEWFGK/ref=sr_1_1?s=ce-de&ie=UTF8&qid=1496500370&sr=1-1&keywords=unicorn+beetle+pro+s7
I bought ArmorSuit for my S7 and it's been great, fits perfectly with my case and besides being slightly more "sticky" it runs smooth. I've since bought additional versions for other devices... Economical with lifetime replacements. (Edited for autocorrected product name.)
I like that this one has a frosty clear back so you can see the samsung logo and s7 logo and it just looks sweet.... probably wont be good for drops but will definitely protect against scratches on the body https://www.amazon.com/SUPCASE-Unicorn-Premium-Protective-Samsung/dp/B01BLF3OLO/ref=sr_1_2?ie=UTF8&qid=1485965513&sr=8-2&keywords=supcase+s7
I bought a hard plastic spigen at the store when I bought my phone just so I had one. I love it and am using it permanently. Great access to the buttons.
http://www.amazon.com/Galaxy-Spigen%C2%AE-Exact-Fit-Premium-Samsung/dp/B01A7IDCC2/ref=sr_1_8?s=wireless&ie=UTF8&qid=1463623100&sr=1-8&keywords=spigen+s7+edge&refinements=p_89%3ASpigen
have this one for my s7 but it's the exact for model that has the phone exposed at top and bottom so it's even more minimal. love it cause it's very matte and adds grip to the very slippery glass back and adds basic protection. wireless charging works too FYI...
http://www.amazon.com/gp/product/B01A7ICRLO?psc=1&redirect=true&ref_=oh_aui_detailpage_o00_s00
Yes I've used it for the past 6 months. Still on my first one. Fits great -- since it's a film, it conforms to the curved edge well. Pics here are accurate: https://www.amazon.com/Armorsuit-MilitaryShield-Protector-Anti-Bubble-Replacements/dp/B01ACXRS6I
I definitely second this. I recommend that you get the Spigen Rugged Armor case. It's about 10-15 dollars and it's pretty good.
Not the same, but pretty similar and I can recommend it:
The Spigen® [Thin Fit] Exact-Fit [Black]
http://www.amazon.com/Galaxy-Spigen%C2%AE-Exact-Fit-Premium-Samsung/dp/B01A7IDCC2?ie=UTF8&keywords=Spigen%20galaxy%20s7%20edge&qid=1464165244&ref_=sr_1_7&sr=8-7
I've used Spigen for my last 3 or 4 phones. The Rugged Armor has been great for my s7 edge. It's slightly thinner than Neo Hybrid, and only slightly thicker than the Thin Fit since it sits in front of the bezel on top and bottom.
This is the case I use:
https://www.amazon.com/gp/aw/d/B01A7IDF3S/ref=mp_s_a_1_3?ie=UTF8&qid=1487822695&sr=8-3&pi=AC_SX236_SY340_QL65&keywords=s7+edge+spigen+clear+case
It's very slim and provides basic protection, which is enough for me (it has a small lip over the screen to protect it from drops). Spigen's cases have been working really well for me and haven't had a problem with them yet. However, if you want a little more protection, this could work as well:
https://www.amazon.com/gp/aw/d/B01A7IDKMO/ref=mp_s_a_1_1?ie=UTF8&qid=1487822868&sr=8-1&pi=AC_SX236_SY340_FMwebp_QL65&keywords=s7+edge+spigen+clear+case
Everyone has their preference on what to disable or keep.. I can give you my opinion and someone else will say keep that app.. So mainly comes down to you.
I can recommend this SD card if you like to save music/movies onto your phone.
SanDisk Ultra 200GB Micro SD (SDSDQUAN-200G-G4A) https://www.amazon.com/dp/B00V62XBQQ/ref=cm_sw_r_other_apa_aHErxbZY6D76C
I prefer finding a case I like, like a Spigen Rugged Armor, and then use a lycra/spandex card pocket. Card Ninja is my favorite.
https://www.amazon.com/Spigen-Rugged-Resilient-Absorption-Samsung/dp/B01A7IDHOU/
https://www.amazon.com/CardNinja-Ultra-slim-Adhesive-Credit-Smartphones/dp/B009ZVL7N4/
I love this Clear TPU case and have used this screen protector for over a year and it looks like new!
True that. I just settled with the Shield IQ LiquidSkin because I've heard the tempered glass never fit the S6E properly. The screen protector is nice and I can't even tell it's there. Would feel safer with tempered glass, however.
that looks like a nice case actually. I just bought the black s7. Sorta regret the black now that I found that clear back case. I thought the black would look better given that it's mostly covered anyway.
I was thinking about this case before. Not sure now.
https://www.amazon.com/Spigen%C2%AE-Resilient-Ultimate-protection-impacts/dp/B01A7IDHOU/ref=sr_1_6?ie=UTF8&qid=1467214812&sr=8-6&keywords=spigen+tough+armor+s7+edge
I have the Pleson, it works great. It is around $19 and I highly recommend it.
I've got a Galaxy S7 Case, Spigen® [Neo Hybrid Crystal] PREMIUM BUMPER [Gunmetal] Clear TPU / PC Frame Slim Dual Layer Premium Case for Samsung Galaxy S7 (2016) case I accidentially ordered instead of the one for the Edge, if anyone is willing to trade for an edge case that would be awesome.
This is the one I use and it's awesome. I have a Spigen slim case on my S7E.
Galaxy S7 Edge Screen Protector, IQ Shield® LiQuidSkin (Case Friendly) Full Coverage Screen Protector for Galaxy S7 Edge HD Clear Anti-Bubble Film - with Lifetime Warranty https://www.amazon.com/dp/B01CURN9UI/ref=cm_sw_r_cp_apa_w0Zvyb53Z2QVX
Have pre-ordered one of these http://www.amazon.co.uk/gp/product/B01BLI4FWI?psc=1&redirect=true&ref_=oh_aui_detailpage_o03_s00 but it's not out till April so have one of these http://www.amazon.co.uk/gp/product/B017TU6I3G?psc=1&redirect=true&ref_=oh_aui_detailpage_o02_s00 ready for next week when I (hopefully) get my edge.
Have had a Unicorn Beetle case on my LG G3 for a long time now and has held up extremely well, from high drops to pockets full of keys.
Dunno, I have these ones and they're both fucking amazing:
Galaxy S7 Edge Case, Spigen® [Rugged Armor] Resilient [Black] Ult... http://www.amazon.co.uk/dp/B01A7IDHOU/ref=cm_sw_r_other_udp_apa_3O0Yxb7R2QZF4
Spigen Neo Hybrid Bumper Style Premium with Slim Fit Dual Layer Protective Cover Case for Samsung Galaxy S7 Edge - Satin Silver https://www.amazon.co.uk/dp/B01B1I6JMM/ref=cm_sw_r_other_apa_aQ0YxbYX79YRQ
The 2nd one I got a few days ago and I'm currently using. I ended up returning lots of cases before this one.
Get this one from Amazon. It's $20 and offers true fast charging, unlike any Chinese bootleg. When you put your phone on it a ring of LEDs around it turns blue, then turns green to indicate fast charging, then fades off after a few seconds. It's sweet.
I went with this one: https://www.amazon.com/gp/product/B01ACXSKAG/
It of course doesn't look or feel like the bare glass, but I'm happier with it (so far) than I expected to be.
I used these and they worked great. With a little persistence they stuck to the curve and overall were easy to put on and they are staying on without issue. :
http://www.amazon.com/Galaxy-Screen-Protector-Case-Friendly-LiQuidSkin/dp/B01CURN9UI?ie=UTF8&psc=1&redirect=true&ref_=oh_aui_detailpage_o04_s02
Spigen I have it. It looks amazing and it protects your phone like crazy
https://www.amazon.ca/gp/aw/d/B01A7ICWTQ/ref=mp_s_a_1_3?ie=UTF8&qid=1519664413&sr=8-3&pi=AC_SX236_SY340_QL65&keywords=spigen+s7+case&dpPl=1&dpID=41z8er7KE9L&ref=plSrch
It's the screen protector that you want to be case friendly. https://www.amazon.com/ArmorSuit-MilitaryShield-Protector-Replacements-Anti-Bubble/dp/B01ACXSKAG Like this. Not the case itself.
Unicorn beetle case on Amazon.
https://www.amazon.com/gp/aw/d/B01BLI4FWI/ref=psdcmw_3081461011_t1_B01BLIBS0A
It's awesome 👍
I actually have the first one that was linked (the non-Edge version) and I absolutely love it. My roommate had a different case for his S7 and once he saw the one I got, he immediately switched.
I like the Unicorn Beetle. I had one for my LG G3. It fits nicely and keeps it thin. So far I have dropeed my S7 a few times and I dont even see a scratch since the edues are rubber.
http://www.amazon.com/SUPCASE-Full-body-Holster-Protector-Samsung/dp/B01BLEWFGK/ref=sr_1_3?s=wireless&ie=UTF8&qid=1464990805&sr=1-3&keywords=s7+case+beetle
Love sipgen cases I have used them on my last 3 phones!
I bought 3 different sipgen cases for my S7E when they had their crazy sale. I have tried the:
This is what I use, and it works great.
https://www.amazon.com/iOttie-HLCRIO132-Wireless-Standard-Charger/dp/B00UXS7958
Only caveats are if it's hot outside the phone can get SUPER hot. Generally I don't have any issues, but on 80*F+ days I usually unplug the charger.
Also, I don't expect the wireless charging to charge fast, so when I actually need fast charging I just move the cable from the dock to the phone.
These are issues with any wireless chargers, not just the iOttie.
Supcase Unicorn Beetle Pro
Doesn't include a screen protector but the plastic in the front makes it feel much more protected in a 360 way. Also it's not very bulky and feels grippy.
I picked up this case and I love it. https://www.amazon.ca/dp/B01BLEWFGK/ref=cm_sw_r_cp_apa_cGtkzbB8B73YM
https://www.amazon.com/gp/product/B01BLF3OLO/ref=ox_sc_sfl_title_1?ie=UTF8&psc=1&smid=A3RZJ9YYQ3ASDK
Best case I ever used. Got it for $1 for my girlfriend's iPhone, and it worked so well I got one for my S7e, and eventually my S7.
I just bought this and it works perfectly and way cheaper than the Samsung brand chargers.
Thanks for the reply!
The Unicorn Beetle pro Full case that I would get though doesn't come with a screen protector (http://www.amazon.com/SUPCASE-Full-body-Holster-WITHOUT-Protector/dp/B01BLI4FWI/ref=sr_1_1?ie=UTF8&qid=1464080997&sr=8-1&keywords=Unicorn+beetle+pro+full+case+S7+edge).
I've never been a fan of them and am generally very careful with my phones (upgrading from a 3+ year old S3).
Should I get a screen protector for this phone though?
Supcase unicorn beetle. Very happy with it amazon link
Right now, I'm using the Spigen Rugged Armor case:
https://www.amazon.com/Spigen%C2%AE-Resilient-Ultimate-protection-impacts/dp/B01A7IDHOU/ref=sr_1_6?ie=UTF8&qid=1467214812&sr=8-6&keywords=spigen+tough+armor+s7+edge
Do you think I should be fine with the GD Smith one along with this case, or should I get a different case?
Thank you for the links by the way!
I had the same problem with that case. Went with one of these instead and it's great.
Spigen Thin Fit Galaxy S7 Case https://www.amazon.com/dp/B01A7ICRLO/ref=cm_sw_r_other_apa_8gljybEA96QAA
I'm a big fan of the Spigen Exact Fit. Very minimal. Check it out
ArmorSuit MilitaryShield Samsung Galaxy S7 Screen Protector (Case Friendly) Anti-Bubble HD Shield w/ Lifetime Replacements https://www.amazon.com/dp/B01ACXRS6I/ref=cm_sw_r_cp_apa_21nMzb52D3NFK
I use the commuter with this screen protector since December and it is still in perfect condition. I followed the instructions and left my phone off for 12 hours which was hard but I did it right before bed on a night I didn't have to set an alarm. It doesnt bunch up in the corners or edges, I have no dirt or air bubbles, and it hasn't torn. I shove my phone in my purse, my pockets, my desk, no issues. It's a good product. Also my touch screen response has not changed at all.
1 down side is when the corner of my nail hits it I can feel that it's not glass I'm touching. Also it gets smuges pretty easy but they wipe off with my shirt.
I have a scosche magnetic mount. It holds the phone with a case just fine even without the included metal. No issues. I have this charger. Works great.
Lots of good options out there. I'd say go for Sandisk's options. Their 128gb is twice as fast for $9 more. The 200gb version is sold out on amazon now though.
http://smile.amazon.com/SanDisk-Ultra-200GB-Micro-SDSDQUAN-200G-G4A/dp/B00V62XBQQ/
I have a Pleson fast wireless charger from Amazon and it works great no heat build up or anything.
http://www.amazon.com/Wireless-wireless-Sleep-friendly-Compatible-Qi-enabled/dp/B01D8D5NCA/ref=sr_1_4?ie=UTF8&qid=1462380533&sr=8-4&keywords=wireless+fast+charger
It's just the nature of it. Some cases are going to grip the curved edge more. Others, like snap on thin cases, do not grip the edge as much and are fine with this protector.
So my debate right now is to stick with this protector and a thin case, or get a protector that only rests on the flat area of the glass, and use the thicker cases.
These are the 3 Spigens I have, last 2 I believe are variants of yours, and the ones that peel up for me. First one is working with the IQ sheild.
http://www.amazon.com/gp/product/B01A7ICRLO
http://www.amazon.com/gp/product/B01AUORG7K
http://www.amazon.com/gp/product/B01A7ID3PS
http://www.amazon.com/Spigen®-Resilient-Ultimate-protection-impacts/dp/B01A7IDHOU
I've had this since the day I got my phone. Adds grip without too much extra bulk. I actually feel it's more comfortable with this on.
Not OP, but I use this same charging pad and have a case on an s7 edge. It's a little finicky, but it definitely works with a case.
Here's the case I use:
http://www.amazon.com/Galaxy-Spigen%C2%AE-Exact-Fit-Premium-Samsung/dp/B01A7IDCC2
IQ Shield
Just installed this yesterday. Even with the matte finish, you can hardly tell that it's on. Install was SUPER easy and it's 100% coverage. No problems putting my Spigen Tough Armor Case around it.
https://www.amazon.com/gp/product/B01CURN9UI/ref=oh_aui_search_detailpage?ie=UTF8&psc=1 this one, case friendly version. Feels very smooth still to this day. I had previously ordered a full cover matte version from Skinomi but I didn't like the material/how it looked and it was most definitely not case friendly
You can't use both - you either use that metal plate on the back OR the wireless charging. Metal completely blocks the electromagnetic field that current version of wireless charging uses.
If you really want to use the phone mounted somewhere on dashboard (which I personally never do) - you can try something like this instead of magnetic mounts:
https://www.amazon.com/iOttie-HLCRIO132-Wireless-Standard-Charger/dp/B00UXS7958
Or, like you said, just give up on wireless charging altogether.
https://www.amazon.com/Armorsuit-MilitaryShield-Protector-Replacements-Anti-Bubble/dp/B01ACXSKAG/ref=sr_1_sc_1?s=wireless&ie=UTF8&qid=1542642809&sr=1-1-spell&keywords=amour+suit+s7edge
Been using this case for 1 year now and no issues. i love the application process too, its quite unique.
Just got this https://www.amazon.com/gp/aw/d/B01AUR1D58/ref=cm_cr_arp_mb_bdcrb_top?ie=UTF8 . Blue coral color to match my phone, reviews seem almost all positive which seems really rare for a case so I'm looking forward to it.
try armor suit - it's the only one that worked with the edge screen
the secret i found is using a hair dryer (on low, cool) to make it stick better to the edge when it is 'curing'
although it's a wet applicator, i like it a lot
(https://www.amazon.com/gp/product/B01ACXSKAG/ref=oh_aui_search_detailpage?ie=UTF8&psc=1)
I'm currently using this case: https://www.amazon.ca/SUPCASE-Full-body-Holster-Protector-Samsung/dp/B01BLEWFGK/ref=sr_1_1?keywords=unicorn+beetle+s7+case&qid=1569097223&s=gateway&sr=8-1
It works quite well for protecting from falls and stuff. The biggest drawback I have with it, is that the area around the home button collects dirt and whatnot between the screen and the screen protector. Otherwise, I find it to be durable and doesn't add as much bulk as something like an Otterbox Defender.
Armorsuit case friendly. Zero issues.
Yeah, my car charger worked great for my s6, but doesn't work with my s7.
I use the Rugged armor, good balance between protection and less bulk.
Armorshieldis what I have, it's good.This is it
https://smile.amazon.com/gp/product/B01ACXSKAG/ref=oh_aui_search_detailpage?ie=UTF8&psc=1
I use this one. It's similar to a Zagg shield but a lot cheaper and easier to install. Identical quality if not better.
Armorsuit MilitaryShield® Samsung Galaxy S7 Screen Protector (Case Friendly) Anti-Bubble Ultra HD Shield w/ Lifetime Replacements https://www.amazon.com/dp/B01ACXRS6I/ref=cm_sw_r_cp_apa_cpfIxbA7CQ80V
https://www.amazon.ca/Spigen-Rugged-Resilient-Absorption-Samsung/dp/B01A7IDHOU
Spigen Rugged Armor Galaxy S7 Edge Case with Resilient Shock Absorption and Carbon Fiber Design for Samsung Galaxy S7 Edge 2016 - Black
Love it. Very nice design, and good protection. It does take 1-2 mm from the edge screen on both sides but I dont care. you can't notice it.
Here is the one I use. Never had any issues with it and my case not getting along.
ArmorSuit MilitaryShield - Samsung Galaxy S7 Edge Screen Protector [Case Friendly] w/ Lifetime Replacements - Anti-Bubble HD Screen Protector for S7 Edge - Clear https://www.amazon.com/dp/B01ACXSKAG?ref=yo_pop_ma_swf
Yeah, it's called Neo Hybrid Crystal! Here's a link http://www.amazon.com/gp/product/B01AUORG7K
Yeah, I plan on getting one of these three
https://www.amazon.com/dp/B01A7IDKMO
https://www.amazon.com/dp/B01BLHLCNY
https://www.amazon.com/dp/B01A7IDHOU
I just put this one on mine. https://www.amazon.com/gp/product/B01BG2EJYS
It went on super easy. But the sides around the curved part didn't stay down at first. But I have this case on it https://www.amazon.com/gp/product/B01BLI4FOG which the front green part is actually a separate piece and it held the sides down while they set/dried.
No bubbles/dust specs etc. I do feel I lost some sensitivity though not much but once in awhile i have to swipe down a few times for the notification bar to come down. (Could also be me getting used to the phone also since I've had it for not even a week.)
I am using a new class 10 200GB in my Edge as well: http://www.amazon.com/gp/product/B00V62XBQQ
http://imgur.com/0PeqhVD
I scooped this 200gb for $80 when Amazon was running a promo.http://www.amazon.com/SanDisk-Ultra-200GB-Micro-SDSDQUAN-200G-G4A/dp/B00V62XBQQ?ie=UTF8&keywords=200gb%20micro%20sd%20card&qid=1459010995&ref_=sr_1_1&s=pc&sr=1-1
Amazon: SUPCASE Full-body Rugged Holster Case WITHOUT Built-in Screen Protector for Samsung Galaxy S7 Edge, Unicorn Beetle PRO Series
Ive been using this screen protector for about 5 months now and haven't had a problem with it not fitting
https://www.amazon.com/gp/aw/d/B01ACXSKAG/ref=mp_s_a_1_3?ie=UTF8&qid=1497878928&sr=8-3&pi=AC_SX236_SY340_FMwebp_QL65&keywords=galaxy+s7+edge+screen+protector&dpPl=1&dpID=51WtCcEuicL&ref=plSrch
Mate you copy and pasted the wrong information :
That information is for:
>CrystalDiskMark 3.0 - PNY U3 Turbo Performance 32GB High Speed MicroSDHC - P-SDU32GU390G-GE
Sequential Read : 90.912 MB/s
Sequential Write : 54.702 MB/s
Speed benchmark for the 200gb sandisk via this site is:
45.93 MB/s read and 24.33 MB/s write for sequential in CDM
ATTO picture on the right tops out at 15 MB/s write speed writing larger files and 40+ MB/s read speed
edit: another customer review http://www.amazon.com/gp/aw/review/B00V62XBQQ/R23QSX1C2N3LKY?ref_=glimp_1rv_cl at 83 MB/s read and 14.7 MB/S write
And another with a CDM http://www.amazon.com/gp/aw/review/B00V62XBQQ/R2VEZ2XWKOTMDU?ref_=glimp_1rv_cl NFI how to interpret as his SEQQ32T1 is 26ish MB/S but SEQ is 60MB/S
/u/Nilzzz reports 19MB/S sequential write
They could, if it takes that long to charge the S7E it likely is quite low power output. A lot of the ports in cars were designed for older phones or those with smaller batteris like the iPhone. Not really a lot you can do if that's the case and want to use that port. Car adapters aren't that much if you do need fast charging though.
Not sure if I can post amazon links but I got it here: http://www.amazon.com/Galaxy-Spigen%C2%AE-Exact-Fit-Premium-Samsung/dp/B01A7ICRLO/ref=sr_1_2?ie=UTF8&qid=1457116638&sr=8-2&keywords=spigen+s7+thin
I've reviewed a bunch and the only good screen protector period is armorshields. The rest suffer from orange peel texture, bubbling, small cutouts excluding the curves, and some have touch sensitivity issues.
https://www.amazon.com/Armorsuit-MilitaryShield-Protector-Anti-Bubble-Replacements/dp/B01ACXRS6I
There is technically no good screen protector for the s7 due to the curve, but this is the closest you'll get.
This one comes with a proper cable too https://www.amazon.com/gp/aw/d/B00LJT2EPK/ref=mp_s_a_1_1?ie=UTF8&qid=1478009111&sr=8-1&pi=AC_SX236_SY340_FMwebp_QL65&keywords=Quick+charge+car&dpPl=1&dpID=41rwgcnT%2BTL&ref=plSrch
It's a Spigen Rugged Armour. £7.95 in the UK at the moment. (or around $11.50)
http://www.amazon.co.uk/gp/product/B01A7ICWTQ?psc=1&redirect=true&ref_=oh_aui_detailpage_o00_s00
Spigen Rugged Armor
Neo Hybrid Crystal - Hybrid
And my daily Thin Fit
Here you go!
http://www.amazon.co.uk/Galaxy-Spigen%C2%AE-Exact-Fit-Premium-Samsung/dp/B01A7IDCC2
That's for the S7. Here's for the Edge:
http://smile.amazon.com/Galaxy-Spigen%C2%AE-Exact-Fit-Premium-Samsung/dp/B01A7IDCC2/ref=sr_1_1?ie=UTF8&qid=1457121251&sr=8-1&keywords=spigen+s7+edge+thin
What do you think of this one? https://www.amazon.com/dp/B01A7IDHOU/ref=cm_sw_r_wa_awd_x_bbZhybRTR42QH
For future reference, you can just type a word then the link example.
Amazon
http://www.amazon.com/gp/product/B01A7IDKMO?psc=1&redirect=true&ref_=oh_aui_detailpage_o02_s00
I prefer the Armorsuit MilitaryShield. It's been reliable with an OtterBox Commuter case, and it has a lifetime warranty.
I was wondering if you have tried this screen protector before?
https://www.amazon.com/gp/product/B01ACXRS6I/ref=ox_sc_act_title_1?ie=UTF8&psc=1&smid=A3LQSX85N730QN
Armorsuit MilitaryShield
Get this: https://www.amazon.com/Armorsuit-MilitaryShield-Protector-Replacements-Anti-Bubble/dp/B01ACXSKAG/ref=sr_1_3?ie=UTF8&qid=1542124903&sr=8-3
Easy to apply, and very durable.
The ultra HD one?
http://www.amazon.com/ArmorSuit-MilitaryShield-Protector-Anti-Bubble-Replacements/dp/B01ACXSKAG?ie=UTF8&psc=1&redirect=true&ref_=oh_aui_detailpage_o02_s00
For the S7 I only have http://www.amazon.com/gp/product/B01AUORG7K?psc=1&redirect=true&ref_=oh_aui_detailpage_o01_s00 I can ship it tomorrow morning within 50 US Con for $13.
i got this one i like it alot doesnt make my phone bulky https://www.amazon.com/dp/B01BLEWFGK/ref=cm_sw_r_other_awd_bja9wbZHPZRBC
I use this one.
http://smile.amazon.com/SUPCASE-Full-body-Holster-WITHOUT-Protector/dp/B01BLI4FWI/ref=lp_10332084011_1_1?s=wireless&ie=UTF8&qid=1457826769&sr=1-1
Am I seeing this right? I know the listing is without the screen protector for the edge but does this mock-up mean they have one with a screen protector or one coming? It would be the first full phone protector case I've seen with an S7 Edge screen protector on it.
http://www.amazon.com/gp/aw/d/B01BLI4FWI/ref=pd_aw_sim_107_3?ie=UTF8&dpID=519-ykl3KDL&dpSrc=sims&preST=_AC_UL100_SR100%2C100_&refRID=12M9VJMH4FN0AAEJ8DQZ
This is the one?
http://www.amazon.com/SUPCASE-Full-body-Holster-WITHOUT-Protector/dp/B01BLI4FWI?ie=UTF8&ref_=cm_cd_al_qh_dp_t
A week ago, I bought this one
Sandisk Ultra 200gb UHS-I is on sale for $80 at the moment. Not seeing much talk about it, is there a major downside I'm not seeing? Reviews say speeds are fine for 4k video.
This is the case I've been using since I bought my phone in early June.
https://www.amazon.com/gp/product/B01BLF3OLO/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
I really like it, feels comfortable and tough. Dropped it a couple times, only been damaged once at a corner by something kinda sharp.
EDIT: went ahead and took some pictures so you can see it in "action."
http://imgur.com/a/Cd3uc
The cracking in the bottom rightof my screen protector is due to a defect, I applied some pressure with my thumb nail and it spidered out, not from lack of protection from case necessarily.
It's currently unavailable but this is it - Galaxy S7 Case, Spigen® [Thin Fit] Exact-Fit [Black] Premium Matte Finish Hard Case for Samsung Galaxy S7 (2016) - (555CS20003) https://www.amazon.com/dp/B01A7ICRLO/ref=cm_sw_r_other_awd_ggb8wbW85S56D
I haven't noticed an scratches but I don't use it all the time. I have this one that I use more often. Galaxy S7 Edge Case, Spigen® [Thin Fit] Exact-Fit [Gunmetal] Premium Matte Finish Hard Case for Samsung Galaxy S7 Edge (2016) - (556CS20030) https://www.amazon.com/dp/B01AUR0NZE/ref=cm_sw_r_cp_apa_5L4rxbEBZQXFT
I use the Obliq if I'm out hiking, at the tennis court, etc.
The Armorsuit Military is by far the easiest screen protector Ive ever put on a phone. Its very hard to mess up putting this on.
This one?
Why'd you choose the hard plastic over the softer?
I know it's not magnetic but I love my iottie wireless charging dock.
https://www.amazon.com/dp/B00UXS7958/ref=cm_sw_r_cp_apa_eNsBybRWXB81Y
I use this and it hasn't had any dust or peeling problems https://www.amazon.com/gp/aw/d/B01ACXSKAG/ref=ya_aw_od_pi?ie=UTF8&psc=1
Disliked my Otterbox, got this instead, I love it, never going back to Otterbox.
Galaxy S7 Case, SUPCASE Full-body Rugged Holster Case with Built-in Screen Protector for Samsung Galaxy S7 (2016 Release), Unicorn Beetle PRO Series - https://www.amazon.com/dp/B01BLEWFGK/ref=cm_sw_r_cp_apap_LgALMAQ4oXPZu