#940 in Audio & video accessories
Reddit mentions of AmazonBasics RCA Audio Subwoofer Cable - 8 Feet
Sentiment score: 3
Reddit mentions: 10
We found 10 Reddit mentions of AmazonBasics RCA Audio Subwoofer Cable - 8 Feet. Here are the top ones.
or
Subwoofer cable for connecting subwoofer speaker to a stereo receiver, sound system, or other compatible audio deviceCorrosion-resistant gold-plated RCA connectors; split-tip center pins for optimal pressure and conductivity; tough, yet flexible PVC exteriorExpertly transmits low-frequency signals generated by subwoofers, ensuring exceptional sound quality and bass responseAccommodates devices with RCA port; works with S/Pdif, digital, and composite video interfaces; backed by an AmazonBasics 1-year limited warranty
Specs:
| Color | Black |
| Height | 0.8 Inches |
| Length | 96 Inches |
| Size | 8 Feet |
| Weight | 0.231483 Pounds |
| Width | 0.8 Inches |
Denon S940
Elac Debut 2.0 B6.2
Elac center
Infinity R10 Sub
Speaker Stands ( optional)
Speaker cable
Sub Cable
Corrected. Single RCA subwoofer cable, not Dual RCA cable.
Sub out on the Q5 is single RCA.
https://www.parts-express.com/Data/Default/Images/Catalog/Original/230-210_ALT_1.jpg
See the middle SW Output with the gold RCA jack. The positive on the RCA is the Tip (Center) portion of the terminal the Ring (Outer) is the negative. The only 3.5mm jack is the AUX on the left.
Subwoofer cable: https://www.amazon.com/dp/B01D5H8G3W Single RCA to Single RCA.
Speaker Cable: https://www.amazon.com/AmazonBasics-14-Gauge-Speaker-Wire-Feet/dp/B01D5H8YNO/ $11 for 100 feet. Cheap, doesn't need to be anything more than that.
It's an SW-10 (lower left of the image), it's an older model, so there is no mono input, you use both inputs. Here is the manual.
Here is what you need:
You plug the single RCA into the receiver, the other end goes into the Y adaptor, and both RCA's of the Y adaptor go into the sub.
That Denton actually has two sub outputs. Denon S510BT
The sub outputs are in the top rear section. You can connect your sub with a cable like this
I set up a previous version of this AVR for my mom when her Yamaha stopped playing nicely with her new TV. No complaints!
That cable would work, but so would a single ended cable like this. It's a mono signal anyway and given the small size of the Vanatoos there won't really be a benefit to lessening the amp gain on the sub using both connectors.
Yeah should work fine. You'll need an RCA cable running from the sub out of your receiver to the mono in on the subwoofer. Then just wire your speakers into the receiver with speaker wire / bananas. No real special cable is needed, just grab a single RCA that'll reach.
Speaker wire for the speakers, digital coaxial or subwoofer cables for the sub.
It looks like binding posts for banana plugs for the speaker connections on the wall plate.
Amazon and monoprice are good places for speaker wire as well.
Banana plugs -5 pairs
Subwoofer Cable -8ft. There are plenty out there for cheap. Just search subwoofer cable.
50ft 14 GA speakerwire. The speaker wire connects to the bananaplugs.
Get this or something similar. It is an RCA subwoofer cable. It goes from the sub (pre out) on the receiver, to the sub in on the subwoofer.
The single (purple) end goes into the receiver. The other end goes into the subwoofer. For the subwoofer, you can either use that cable and plug both into the subwoofer's left and right inputs, or use this and plug the single plug into the subwoofer's LFE input. Either way works. Some subwoofers are easier to come out of standby when both left and right inputs are connected. I use the one you mentioned.
The two outputs on the receiver are for connecting 2 separate subwoofers. Do NOT use both of those to go into 1 subwoofer.