#1,837 in Tools & Home Improvement
Reddit mentions of GE Enbrighten Z-Wave Plus Smart Motion Light Switch, Works with Alexa, Google Assistant, 3-Way Compatible, ZWave Hub Required, Repeater/Range Extender, White & Light Almond, 26931
Sentiment score: 3
Reddit mentions: 4
We found 4 Reddit mentions of GE Enbrighten Z-Wave Plus Smart Motion Light Switch, Works with Alexa, Google Assistant, 3-Way Compatible, ZWave Hub Required, Repeater/Range Extender, White & Light Almond, 26931. Here are the top ones.
or
VOICE CONTROL – ALEXA & GOOGLE ASSISTANT COMPATIBLE (requires a Z-Wave certified hub). Works with the following Z-Wave certified hubs: SmartThings, Ring Alarm, Wink, ADT Pulse, ADT Command, Trane, Vivint, Nexia, Honeywell, Home Seer, Harmony Home Hub Extender, Vera and more.SELECTABLE MOTION CONTROL – Personalize the switch with three motion-detection options – occupancy, vacancy and manual. Occupancy mode turns lights ON/OFF automatically, while lights are turned on manually and off automatically in the vacancy setting. To deactivate the motion sensor, select manual operation. With five time-out duration options ranging from five seconds to 30 minutes and up to 180-degree detection coverage, the switch accommodates any room with varying amounts of activity. Additionally, enjoy custom scenes, versatile scheduling and convenient alerts with remote operation and voice control when connected to a compatible hub.3-WAY READY – The smart device operates perfectly on its own or seamlessly integrates into multi-switch setups with required add-on switches – models 12723, 12728, 46199 or 46200. Up to four add-on switches can be connected to the same device.Voltage:120 voltFULL-HOME COVERAGE – Z-Wave Plus works with all previous Z-Wave generations to allow continued expansion of your home-automation network. The switch is capable of controlling indoor or outdoor fixtures for whole-home automation and repeats your Z-Wave signal from your hub or other devices to extend your range by up to 150ft. Extended signal range increases your home automation coverage to enhance your control.EASY INSTALLATION – Requires indoor in-wall installation with hardwired connections. NEUTRAL WIRE REQUIRED. Includes white and light almond cover buttons (wall plate not included). Works with all LED, CFL, incandescent and halogen bulbs as well as other devices. Operating temperature range 32-104 degrees Fahrenheit.Please refer user guide below for better use
Specs:
| Color | White & Light Almond |
| Height | 3 Inches |
| Length | 1.5 Inches |
| Number of items | 1 |
| Size | Switch |
| Weight | 0.4 Pounds |
| Width | 1.5 Inches |
Well while I have you here (not trying to have you be my personal support staff so feel free to ignore), I am also planning to have at least one motion detector per room so i can do things based on motion. I was going to get the GE on/off motion switch (https://www.amazon.com/GE-Wireless-Lighting-Repeater-14291/dp/B07226MG2T/ref=sr_1_2_sspa?ie=UTF8&qid=1525720559&sr=8-2-spons&keywords=ge%2Bsmart%2Bswitches&th=1) rather than buy a switch and then buy a separate motion sensor, 2 in 1 rater than having to maintain 2 things!
If I have a setup like, GE motion on/off switch which controls room lights, but also have a spot heater hooked up to a different outlet connected to a smart outlet/plug which i will connect to smartthings....
I assume the "motion" detection will work with smartthings? So i can do something like "when motion is detected (via GE smart switch) in Room, turn on lights and spot heater"
sorry newbie question have to know all this before i plop down hundreds of dollars upgrading all my switches. :)
>I don't want a motion switch as I actually want it to be smart
Get both. GE smart motion detector switch(also comes in a dimmer version)
The motion detector will be instant for the light switch it directly controls, but it's also a smart switch so you can control it through your system and use it to trigger other routines. Once you get SmartThings there's a device handler that allows a lot more customization and you can essentially treat the motion detector as a separate device from the switch. I have one in my entryway that controls a lot of my automation. I'll get more eventually, but they're not cheap and I wanted to put in smart switches in all my house first.
Added bonus: no dead batteries since it runs off mains.
Boom
You may want to look into this switch. Had motion sensor and buttons to toggle on and off.
Not 100% sure what you need, but it sounds like you want the motion sensor never to be disabled?
I'm not sure exactly how this switch works, but you could use webcore (add-on to smartthings) to make it do what you want. Aka turn the light off if the light is left on too long without motion.
Hopefully this helps!
GE, White & Light Almond, Enbrighten Z-Wave Plus Smart Motion Light Switch, Works with Alexa, Google Assistant, SmartThings, Wink, Zwave Hub Required, Repeater/Range Extender, 3-Way Compatible, 26931 https://www.amazon.com/dp/B07226MG2T/ref=cm_sw_r_cp_apa_i_I21YDb0HWHDQW