#3,407 in Automotive
Reddit mentions of Griot's Garage 14600 100% Cotton Polishing Cloths 10 Pk
Sentiment score: 1
Reddit mentions: 1
We found 1 Reddit mentions of Griot's Garage 14600 100% Cotton Polishing Cloths 10 Pk. Here are the top ones.
or
- KIT INCLUDES: Genuine Zebra Loop Handle Pot + Inner pan + 2 Firebox (pat pend) Spring Tempered Stainless Steel Two Function Handle Clips (search YouTube: "Bomb Proof Billy Can")
- LOCKING BAIL HANDLE - These Zebra Loop Handle Pots are equipped with our (pat pend) stainless steel handle clips which allow you to manually lock the handle in the upright position to keep it out of the campfire heat and for easy pouring (when the handle is locked upright the pot lid is unencumbered, free to be easily removed or replaced)
- LOCKING LID - Our stainless steel clips also serve to keep the lid in place when the handle is in the upright position for stowing provisions inside or to allow horizontal baking!
- MOST VERSATILE DESIGN - The lid fits both the pot and the inner pan. The lid will also work both upside down and right side up. These features allow stacking the parts in different configurations & combinations. The multiple functions of our handle clips have added even more versatility to this already amazing pot system.
- DISCLAIMER: These pots weren't made to be used as ovens. Bake at your own risk. I am still using the same pot that I started with - I use food or rocks as a heat sink or frequently rotate to avoid overheating. --Steve
Features:
Specs:
| Color | White |
you'll want to clean - sand -clean your case before you paint. you don't need to use anything to harsh, just some rubbing alcohol, some fine (200+ grit metal sandpaper) and then some rubbing alcohol again, make sure you keep fingerprints off the case as the oils on your fingers will prevent the paint from adhering properly.
you'll probably want to prime the case first, spray paint with primer won't do it, as you're going from a very dark colour, black, to a much lighter colour, red.
The best way of doing it is to sand everything down, paint everything in black, GLUE your stencil to the case (after the black has dried), there are some glues specific for stencil painting. Then prime your case with the stencil on the case, once that dries (DO NOT REMOVE THE STENCIL) paint your red over it, BEFORE this dries, remove the stencil. Be very careful as some of the primer paint may have stuck to the stencil and can try to rip into the decal.
After you have everything painted, put a clearcoat on it, and give it a good polishing sanding, use a good metal polishing compound, and a buffing wheel, or a cotton rag. (something like these) DO NOT use a washcloth or other 'pile'd' fabrics, they will soak up your polising compound and scratch your case.