#4,512 in Tools & Home Improvement
Reddit mentions of Insteon Smart Dimmer 6-Button Keypad, KeypadLinc In-Wall Controller, 2334-232 (White) - Insteon Hub required for voice control with Alexa & Google Assistant
Sentiment score: 2
Reddit mentions: 5
We found 5 Reddit mentions of Insteon Smart Dimmer 6-Button Keypad, KeypadLinc In-Wall Controller, 2334-232 (White) - Insteon Hub required for voice control with Alexa & Google Assistant. Here are the top ones.
or
- Two products in one: 6-button controller and 600-watt dimmer
- Monitor and control up to 5 different devices or sets of devices
- Create whole-house lighting scenes in minutes & view the status of any linked device with built-in LEDs
- Other available models: 8-button Dimmer Keypad (2334-222) + 6-button On/Off Keypad (2487S). Wall plate NOT included - use Insteon Screwless Wall Plate (2422-222) for a professional finish
- Works with Amazon Alexa & Google Assistant for voice control via required Insteon Hub (2245-222) + Doubles as Access Point for Insteon systems
Features:
Specs:
| Color | White |
| Height | 2 Inches |
| Length | 4 Inches |
| Number of items | 1 |
| Weight | 0.29982867632 Pounds |
| Width | 2 Inches |
Insteon 6 button Keypad
https://www.amazon.com/INSTEON-2334-232-Keypad-Dimmer-6-Button/dp/B00DN9VGL2/ref=sr_1_1?ie=UTF8&qid=1509735074&sr=8-1&keywords=insteon+6+button+keypad
Insteon Fanlinc
https://www.amazon.com/Insteon-2475F-FanLinc-Dual-Band-Controller/dp/B00715SU4A/ref=sr_1_1?s=hi&ie=UTF8&qid=1509735092&sr=1-1&keywords=insteon+fanlinc
Keypad button labels
https://www.smarthome.com/fanlinc-button-kit-for-keypadlinc-white.html
Boom, done. You don't even need a hub.
came here to say the same thing. I have two of these installed in my house. I did however wire it a little bit different than the way it was stated in the manual. I wired the light directly to the 6 button dimmer and then linked the 4 middle buttons to off/low/med/high with the fanlinc
Fanlinc box wired to the ceiling fan
https://www.amazon.com/Insteon-2475F-FanLinc-Dual-Band-Controller/dp/B00715SU4A
Keypad
https://www.amazon.com/Insteon-Dual-Mesh-Technology-Unbeatable-Reliability/dp/B00DN9VGL2/
keypad insert for the fan speeds
https://www.amazon.com/Insteon-2322-382-FanLinc-Button-KeypadLinc/dp/B007S0CAMQ/
another option i considered but didnt actually pursue is the Aeotec micro dimmer that could be paired with a their wall swipe switch whenever it comes out.
https://aeotec.com/z-wave-wall-switch
https://aeotec.com/z-wave-light-dimmer-switch
It's not a cheap, or easy solution, but here is what I did for my ceiling fan. First off, I am using Insteon smart devices. I don't see a lot of discussion about Insteon here, but I love it. I've pretty much replaced every switch in my house with Insteon. They sell their own smart hub, but I have an ISY994i from Universal Devices because is works with my security system.
So, on the the fan/light control. I bought/installed an Insteon fanlinc. which installs into the housing of the ceiling fan. With the FanLinc and a Smart hub you can control the fan speed and light with program logic, or your cell phone. But to control it from the wall, I installed an Insteon 6 button keypad dimmer and FanLinc button kit. The end result is a smart fan/light I can control with my phone and programming logic, but also has a nice keypad on the wall for setting the fan speed, etc.
Again, this is not a cheap option (especially if you have to buy the smart hub), but it works great!
Just looking at amazon reviews.
Insteon makes a product for just this. Pair it with a 6 button controller and you’ll have separate control and speeds.
Insteon 2475F FanLinc Insteon Dual-Band Ceiling Fan and Light Controller https://www.amazon.com/dp/B00715SU4A/ref=cm_sw_r_cp_apip_4YQEZhs6N5LUL
Keypad Dimmer Switch (Dual-Band), https://www.amazon.com/dp/B00DN9VGL2/ref=cm_sw_r_cp_api_i_NhaPDbNSKSFH8