Reddit mentions: The best soldering tips
We found 10 Reddit comments discussing the best soldering tips. We ran sentiment analysis on each of these comments to determine how redditors feel about different products. We found 3 products and ranked them based on the amount of positive reactions they received. Here are the top 20.
1. Weller ST7 TIP,CONICAL,1/32",FOR WP25/40
- ST Series Tips: Will fit the SP40L / SP40N series irons as well as the WP25, WP30, WP35, WLC100 series tools
- Precision ground copper tips are plated with iron, nickel and chromium
- ST7 - .031" / 0.79 mm diameter Conical tip
- Tinned with Lead Free alloy
Features:
Specs:
Height | 6 Inches |
Length | 1.75 Inches |
Number of items | 1 |
Size | 0.031" |
Weight | 0.02208 Pounds |
Width | 0.5 Inches |
2. Oatey 31400 Bagged 9-Inch x 12-Inch Flame Protector
- Occupational Health & Safety
- Country of Manifacturer: United States
- Manufacturer: Oatey
- 9" x 12" woven ceramic (non asbestos) heat shield
- Protects work areas from torches up to 2000 Degree
- Packaged in a polybag
- Protects studs, walls, floors and other surfaces from sparks and flames
Features:
Specs:
Height | 1 Inches |
Length | 6.25 Inches |
Number of items | 1 |
Size | 9"" x 12"" |
Weight | 0.01 Pounds |
Width | 6 Inches |
🎓 Reddit experts on soldering tips
The comments and opinions expressed on this page are written exclusively by redditors. To provide you with the most relevant data, we sourced opinions from the most knowledgeable Reddit users based the total number of upvotes and downvotes received across comments on subreddits where soldering tips are discussed. For your reference and for the sake of transparency, here are the specialists whose opinions mattered the most in our ranking.
I'm still pretty new to this myself, but like you I have some electronics experience in the past. I just got this Weller 40w iron station with a desolder braid/sucker and a solder tip cleaner. Oh and a more precise tip for the solder iron
I'm really happy with it all so far, and couln't imagine needing more for a while. A heat gun would be nice for de-soldering and reflowing premade boards (like modding Boss pedals), but that can also be done with a regular solder iron as far as I know. You can get the above for about $60 total, so it's a nice way to get your feet wet without a huge investment. Then you gotta add on components/enclosures/pots/switches etc. Maybe get a helping hands and/or circuit holder if you need
Oh and get a good multimeter. I went a step up from the $20 ones and got this one which I'm also really happy with.
That is a really good idea, I actually have a soldering iron but I need a better head for more precise work. think this will work in a v3 gearbox and this tip good enough for gearbox work? Thanks for your help man
A felt plumbers pad is perfect for this.
Here’s what I’ve been using. Nice and pointy.
https://www.amazon.com/dp/B0002BSP4K
You asked for tech items under $10. Here's a few I can think of.
I'd suggest:
http://www.amazon.com/gp/aw/d/B000AS28UC
Plus a smaller tip:
http://www.amazon.com/gp/aw/d/B0002BSP4K
Weller is a highly trusted brand and buying a variable one means you'll likely never need another soldering iron for any job.
Other items:
Solder itself
http://www.amazon.com/gp/aw/d/B00068IJPO
In case you mess up:
Either a solder sucker
http://www.amazon.com/gp/aw/d/B005GIPKOW
or solder wick
Nice but not needed(since that iron comes with a sponge):
http://www.amazon.com/gp/aw/d/B00FZPGDLA
Clippers
Iron
Tip for iron
These work wonders.
https://www.amazon.com/Oatey-31400-Bagged-12-Inch-Protector/dp/B0002YU2SY
Technique is everything, though. Keep the flame pointed where you intend the heat to go.
Is there anything wrong with a conical tip like this? I soldered and desoldered plenty of switches with this just fine.
Don’t forget, you need one with a tip the size of a pen. Any bigger and you will burn your pcb. This is a decent one that I use
Weller WLC100 40-Watt Soldering Station https://www.amazon.com/dp/B000AS28UC?ref=yo_pop_ma_swf
Weller ST7 ST Series Conical Solder Tip Hobbyist for WP25, WP30 and WP35 Irons, 0.31" https://www.amazon.com/dp/B0002BSP4K?ref=yo_pop_ma_swf
OMorc Desoldering Wick, Solder Sucker & Solder Braid (2.5mm Width, 1.5m Length) – Desoldering Vacuum Pump Solder Removal Tool https://www.amazon.com/dp/B01I14V4X8?ref=yo_pop_ma_swf
Sometimes for the smaller welds, like on LEDs, try adding solder before sucking.