Reddit mentions: The best stainde glass making supplies
We found 15 Reddit comments discussing the best stainde glass making supplies. We ran sentiment analysis on each of these comments to determine how redditors feel about different products. We found 7 products and ranked them based on the amount of positive reactions they received. Here are the top 20.
1. Zehhe Copper Foil Tape with Double-Sided Conductive - EMI Shielding,Stained Glass,Soldering,Electrical Repairs,Slug Repellent,Paper Circuits,Grounding (1/4inch)
- [CONDUCTIVE ADHESIVE] β Double-sided Conductive means both sides of this tape will carry current so whether it's soldering, grounding or minor repairs, our tape will do the job, and do it well.The tape is also ideal for transformer, mobile phone, computer, PDA, PDP, and LCD monitor, PC, copier etc
- [PERFECT FOR STAINED GLASS MAKERS] β Our tape has strong adhesive and is a great surface for soldering onto when creating your stained glass pieces.21.8yards has quick peal paper backing, making it easier to work with and providing a neater finish
- [GREAT FOR EDUCATION AND CRAFTS] β The tape is an ideal size for creating paper circuits, a fun and easy way to introduce children to electronics. Malleable tape with strong adhesive can be moulded to most surfaces giving unlimited potential for craft projects
- [EMI SHIELDING]β If you want to protect your small electronics from electromagnetic interference, our highly conductive tape is the quick and easy solution
- [BE ATTENTION !!!] β Safety overrides all else , i hope you guys do it carefully no matter where the tape will be used in
Features:
Specs:
Height | 0.2 Inches |
Length | 4.29 Inches |
Size | 1/4inch |
Width | 4.29 Inches |
2. Copper Foil Tape [2 Huge Rolls] (1/4inch X 36yd Each) 72 Yard Pack with Conductive Adhesive - Stained Glass, Soldering, Electrical Repair, Grounding, EMI Shielding - Extra Value Pack- Thicker Foil
- Strong Adhesive - Here is our copper conductive tape [1/4 inch, 108ft, 2pk], that will come in handy for various DIY & Creative projects. The copper shielding tape is super sticky and is protected with an easy peel backing for long-lasting use.
- Get Creative - Our copper foil tape with conductive adhesive is a desirable choice for decorating your home, making personalised wall vinylβs, jewellery, stainless glass & more. The electrical conductive tape can also be coupled with a soldering iron for a smooth professional finish.
- Highly Conductive - Our EMI shielding foil tape uses a highly conductive material with low resistance, making our shielding tape a practical option for electrical projects, repairs and even paper circuits.
- EMI & RFI Shielding - Our copper tape conductive is a simple & effective solution for EMI & RFI Shielding. The copper tape adhesive is perfect for removing any interference & buzzing sounds from electrical devices & accessories.
- Indoor & Outdoor Use - Our copper tape can be used on most surfaces & is able to withstand all weather conditions. We truly believe our copper tape is the best in the marketplace and we stand by that. If you can resist our electrical shielding tape, weβll FULLY REFUND YOU. So, click βAdd to Cartβ now and buy with confidence.
Features:
Specs:
Color | Copper |
Height | 4.7 Inches |
Length | 4.7 Inches |
Weight | 0.16 Pounds |
Width | 0.5 Inches |
4. Selizo 2 Pack Copper Foil Tape with Conductive Adhesive for EMI Shielding, Slug Repellent, Paper Circuits, Electrical Repairs, Grounding
QUANTITY: Selizo Copper tape set comes with 4 pieces conductive copper foil tapes, each copper tape is about 1/4β x 21.8yd in sizeFUNCTION: These conductive copper tapes are made of copper material. They are electrical conductivity and resistant from heat, moisture, chemical, corrosion, oxidizatio...
Specs:
Height | 0.2362204722 Inches |
Length | 4.330708657 Inches |
Size | 2 Pack |
Width | 4.330708657 Inches |
5. 1/8" U Copper Came / 30feet (2ft X 15 Pieces)
- 1/8" Channel - 5/32" Facel U Copper Came
- Total 30ft : 2 ft. (24inch) Length X 15 pieces
- 1/8" " U Copper came(30 feet) will be shipping 2 feet in length for small glass panels.
- Use to frame small stained glass panels and to create picture frames.
Features:
Specs:
Height | 2 Inches |
Length | 24 Inches |
Width | 2 Inches |
6. Jax Pewter Patina, Black, 16 oz
16oz bottle(1 pint)Produces a dark black antique finish on pewter, lead, brass,bronze,copper,tin-lead alloys and solderMade in the usa
Specs:
Height | 5.8 Inches |
Length | 8.3 Inches |
Weight | 0.7 Pounds |
Width | 6.9 Inches |
7. Copper Foil Tape (2inch x 18ft) for Guitar and EMI Shielding, Slug Repellent, Crafts, Electrical Repairs, Grounding - Conductive Adhesive - Thicker Foil - Extra Wide Value Pack at A Great Price
ππππππππ ππ ππππππππππ π
ππ ππππππππππ β No longer have interference by using ineffective conductive shielding paint. Instead, build the perfect Faraday cage and block that buzz with Kraftex Copper Ta...
Specs:
Height | 3 Inches |
Length | 2.5 Inches |
Release date | January 2018 |
Weight | 0.2625 Pounds |
Width | 3 Inches |
π Reddit experts on stainde glass making supplies
The comments and opinions expressed on this page are written exclusively by redditors. To provide you with the most relevant data, we sourced opinions from the most knowledgeable Reddit users based the total number of upvotes and downvotes received across comments on subreddits where stainde glass making supplies are discussed. For your reference and for the sake of transparency, here are the specialists whose opinions mattered the most in our ranking.
It's actually pretty awesome how little you need. I got this kit on Amazon that includes a stand, solder (the metal stuff you melt), the soldering iron, and interchangeable tips for the end: https://www.amazon.com/gp/aw/d/B01M4JW8YK/ref=yo_ii_img?ie=UTF8&psc=1
You also need copper tape https://www.amazon.com/gp/aw/d/B01CH4LYZ6/ref=yo_ii_img?ie=UTF8&psc=1 to wrap around where you want it on the stones, since the solder won't usually adhere to stones directly.
Down the road I really should also get some flux, which is a liquid that helps the solder flow more freely, and a third hand, which has a bunch of clamps to help hold things exactly where you want. Let me know if you want to see some online tutorials, I can send you some of the links I liked learning from!
If you want to get into stained glass, the bare minimum tools are pretty affordable. Start with a small (flat) panel project using copper foil. (Don't get into leaded stained glass until you know you want to do big ol' windows.)
For that you'll need a glass cutter (http://www.harborfreight.com/catalogsearch/result?q=glass+cutter), grozer pliers (http://www.amazon.com/Delphi-Glass-Breaker-Grozer-Pliers/dp/B00IOOS77C), and a used ceiling tile (as a work surface). (Should be less than $15 all together. Don't go fancy.) (If you want more, then spend another $10 on a pair of running pliers. And you're better off learning how to properly break glass without needing a grinder, so no grinder.)
Then go to a stained glass store and buy the cheapest scraps of glass you can stand for your first project. (Try to under $20.)
If you get those cut out into a shape you like without giving up on the whole hobby, buy some copper foil tape (~$10). They'll sell you a plastic tool to flatten it down with, but honestly just get a random piece of plastic from Goodwill that's about that same hardness and that'll do you just as well. Then the expensive bit will the the solder, flux and soldiering iron. A pound of solder is easily $20. A can of solder flux paste is ($5-10)(though it'll last till the end of time). And the soldering irons start between $30-$50. If you can find one of the right size/temperature used, then get it used.
So that's around $30-40 to see if you like working with glass and another $100 to turn that glass it into a something decorative. And most of that money is for things that could be resold if needed.
Maybe add in $5 for some New Skin.
Here's an overview of how to do it:
http://www.wikihow.com/Make-Stained-Glass
If you decide to try it and you want more details or have questions, just message me.
Hi DIY!
I'm trying to assemble a list of products (via amazon prime for time and location reasons) to do a project with my partner on his birthday Sunday with a budget of $25-30. I think he'd get excited for (and I can manage!) LED paper circuits. Luckily we have a soldering iron and multimeter around the house. Here are the products I've whittled down to with no idea at all what I'm searching for except advice from tutorials:
Copper tape - Amazon link HERE
LEDs - Amazon link HERE
Batteries - Amazon link HERE
Do these choices look okay, and if not would you suggest any alternatives? Thanks so very very much for any help!
Love the copper theme. I feel like the fan should have a copper strip around it the outer edge to complete effect. Something like this would work.
Perhaps a bus bar is what you want?
Another good option is double sided adhesive copper tape. Just stick it down wherever you want. If you need to turn a corner, just put another piece on top-- it will conduct through the adhesive. This makes it absurdly easy to put ground wherever you want. The downside is that you'll have to solder wires on to connect to your switches. Also, it's not great for the positive side due to the risk of a short.
I have used copper channel for βframingβ a copper foil project. It takes the solder and provides good support for mid-sized projects.copper channel
I haven't had any issue yet, but now that you mention it, I might have to pick up some foil tape to coat the inside of my next one, just to be safe.
It looks awful, but it looks like the copper foil tape used for stained glass soldering:
https://www.amazon.com/Bullet-Face-Double-sided-Conductive-Electrical/dp/B01MR5DSCM/ref=sr_1_6?ie=UTF8&qid=1521330979&sr=8-6&keywords=soldering+foil+tape
Copper Tape over the lead should do the trick. If you can find 1/8th size you won't have to cut it in half.
Copper tape with conductive adhesive.
You can find some really thin rolls on [Amazon.] (https://www.amazon.com/Copper-ROLLS-4inch-Conductive-Adhesive/dp/B01CH4LYZ6)
How thick? You can buy copper foil in rollsin a variety of widths, but that may be too thin for your use?
If you want to just darken the cracks and letters use pewter black showen bellow it will turn the entire piece black then rub it with 000 steal wool you can get at lowes. If you want to paint a part look into the paint they use for toy soilders. Ive never done it so i dont know what they use but it can be done
https://www.amazon.com/Jax-PBP-Pewter-Patina-Black/dp/B00YFPQ7YY
Find ways of protecting yourself while you're sitting still and sleeping, as that's when you're most vulnerable. I've written about radiosurgery, which is the act of destroying select tissue with electromagnetic radiation. There's a real threat of permanent brain damage. Do what it takes to stay healthy.
What is your budget?
I've tried the following (from /r/emshielding sidebar):
I would recommend instead of the above (which was me prototyping and testing vectors), do it the right way the first time, and build my ventillated sleeping enclosure (~$1,000 for aluminum, plus add'l layers), and coat it with layers of shielding materials (copper flashing > butyl > sheet steel > buytl > sheet lead > butyl), until you achieve complete relief. Don't skimp on the fans and power supplies.
Thanks! And yes, copper tape. This stuff specifically. Some people were saying that the adhesive side isn't conductive on certain tapes, so they were soldering their large pieces together, but I had zero trouble with that. Checks out on the multimeter. I just cut lengths of tape with the paper still on the back, held them firm in place, and then pressed around the edges of the cavities to slightly bend the shape into the copper. I cut them out with scissors, and stuck it all in there. Then filled in all the spots that didn't connect with smaller pieces of tape. It took a little bit of time, but I think it would go faster the next time I do it since part of the time spent was just getting used to working with the stuff.