Reddit mentions: The best archery bow maintenance accessories
We found 20 Reddit comments discussing the best archery bow maintenance accessories. We ran sentiment analysis on each of these comments to determine how redditors feel about different products. We found 11 products and ranked them based on the amount of positive reactions they received. Here are the top 20.
1. Selway Limbsaver Recurve Bow Stringer
- Size: Medium/Large
- Style: Underwear
- Color: Black
- Warranty: 1 year warranty on all manufacturer defects
Features:
Specs:
Color | Recurve Black |
Height | 0.98 Inches |
Length | 8.82 Inches |
Number of items | 1 |
Size | One Size |
Weight | 0.75 Pounds |
Width | 4.02 Inches |
2. BOW TRAINER Resistance Trainer
Resistance bands10"-32" draw length3-130 lb draw weight
Specs:
Color | Black |
Height | 1 Inches |
Length | 36 Inches |
Weight | 1.21 Pounds |
Width | 3.75 Inches |
3. Easton T Bow Square, Black
- Attaches to string above and below the nocking point
- T-shape bow square
- Color is orange
Features:
Specs:
Color | Black |
Number of items | 1 |
Size | One Size |
Weight | 0.05 Pounds |
5. Goat Tuff Products GT Arrow Fletcher, Brown
- Compact design
- True Contact Design
- 3 or 4 fletch
- Country of Origin:China
Features:
Specs:
Color | Brown |
Height | 1.75 Inches |
Length | 11.25 Inches |
Weight | 0.38 Pounds |
Width | 7 Inches |
6. Easton Dr. Dougs Full Synthetic Arrow Lube
- Scent free solution
- Easy to apply
- Neoprene sleeve with clip included
Features:
Specs:
Color | black |
Height | 5 Inches |
Length | 5 Inches |
Number of items | 1 |
Size | One Size |
Weight | 0.13 Pounds |
Width | 3 Inches |
7. Pine Ridge Archery Archer's Allen Wrench Set
- The universal nature of this Pine Ridge Allens Archery set has the ability to work on any bolt or screw with hex screws on your bow
- This basic and highly versatile fastening/driving tool also works for your smaller things like your releases
- This Allen wrench set is Made in the U.S.A. and has top-notch quality with 8650 industrial-strength chrome vanadium tool steel
- This is the last wrench you’ll ever have to buy! One-piece construction, slip-resistant finish, and custom bolt and nut assembly
- If you are looking to do some DIY bow work and need a set of great quality Allen set, this is the one for you
Features:
Specs:
Color | Yellow |
Height | 0.9 Inches |
Length | 6.9 Inches |
Number of items | 1 |
Size | .050”, 1/16”, 5/64”, 3/32”, 7/64”, 1/8”, 9/64”, 5/32”, 3/16” |
Weight | 0.05 Pounds |
Width | 5.1 Inches |
8. Scorpion Venom Polymeric Bowstring Fluid, 8g
- Country Of Origin : China
- The Package Height Of The Product Is 2.54 Centimeters
- The Package Length Of The Product Is 20.32 Centimeters
- The Package Width Of The Product Is 7.62 Centimeters
Features:
Specs:
Height | 1.5 Inches |
Length | 5.75 Inches |
Weight | 1 Pounds |
Width | 3.75 Inches |
9. Trad Gear Tornado Archery Bowstring Serving Jig & Spool #4 Nylon Serving Material - Your Choice of Colors (Black)
- Professional Bowstring Serving Jig Complete With Spool of #4 Nylon Serving
- Your Choice of Serving Color ( see drop down menu )
- Repair or Make Your Own Bowstrings!
- Instructions Included !
- Made In USA
Features:
Specs:
Color | BLACK |
10. e5e10 Bow Pounds Lbs Measuring Bow Up to 88 Pound Digital Bow Scale Instrument Test Tool Led for Recurve/Long Bow Hunting
Quality tested and ensured for maximum durabilityDesigned with only the toughest, roughest users in mindComfort and performance come hand in hand with Allen comMeasures peak weight or holding weightTo tune your bow accurately, you'll need this digital draw-weight scale.
Specs:
Color | Black |
11. A&R Sports Replacement Blade Carrying Pouch
Package length: 3.81 cmPackage width: 12.7 cmPackage height: 40.64 cmProduct Type: SPORTING GOODS
Specs:
Number of items | 1 |
Size | One Size |
Weight | 0.18 Pounds |
🎓 Reddit experts on archery bow maintenance accessories
The comments and opinions expressed on this page are written exclusively by redditors. To provide you with the most relevant data, we sourced opinions from the most knowledgeable Reddit users based the total number of upvotes and downvotes received across comments on subreddits where archery bow maintenance accessories are discussed. For your reference and for the sake of transparency, here are the specialists whose opinions mattered the most in our ranking.
Ah nice, you'll have all kinds of options then! Lots of people like the B-Stinger stablizers, and I've heard good things about Doinker stabs as well!
If you're okay with a used stabilizer, check around on the Archerytalk classifieds. Can often get a used one in good shape for a better price than brand new.
I have a Goat Tuff fletching jig. Half price compared to a Bitzenburger. Does a great job. I'll probably buy what's considered a better one later, but I'll always have this one. Super simple , works great, and I get compliments on my arrows. Goat Stuff Fletching Jig
Awesome stuff :D
I love everything horror and rock/metal music related :P posters, CDs.. that sort of stuff :P
Simplest pleasure... To sit at the summer cabin.. with a fishing rod in my hands and my iPod at my side playing some good tunes :P
A bow stringer for my bow would be awesome :D I can't use it without one :P
Pandora's Mystery Summer Box of Goodies
Yay! A fellow leftie.
You might want to pick up some arrow lube. Those skinny arrows can go an awfully long way into the target, lube makes them a damn sight easier to pull out. An arrow puller also helps.
I have the same Shibuya rest and button on mine. Advice I got from people at my club who also use them was to put a tiny upward kink in the rest's wire - maybe 2.5mm / 0.1" from the end - to help keep the arrow on the rest. Also have the tiny allen key that comes with it on hand when you first go out shooting, I had to adjust mine a couple of times until it felt right.
Great accomplishment, looks good! You should put a nock point on that string, I can see that the arrow is nocked very low on the string, causing the limbs to bend unevenly. If you don't have a bow square, you can get away with a framing square. Search for "tied on nock points" on YouTube to learn how to actually apply a nock point. Good luck, and keep makin'. Also, listen for pops or crack sounds coming from your bow, and routinely inspect the belly for chrysals (compression fractures).
Yeah, my guess is that you need to move your nocking point up a bit. Try moving it up in 1/8" increments until your flight looks more stable. Don't go more than 1/2" up from where you are now, though.
The best way to go is to use a bow square and measure out 1/2" above the rest as a starting point, then adjust up and down to tune. I don't know if you have one, though. You might ask the range if you can borrow one.
A good variety of Allen Keys. And something nice and compact to hold them in. But try to stay away from the collapsing sets that are all compact like Example only because sometimes they are too short to reach what your trying to use.
I recommend Scorpion Venom's liquid bowstring wax..you just rub the tube up and down your strings (it has a foam roller tip) then take your fingers and work it in. Good stuff.
Have you looked into something like this - https://www.amazon.com/Bow-Trainer-Strength-Training-Archers/dp/B00B7PFG38
Otherwise, push-ups, rows or pull ups will help to keep the muscles going. The muscle memory without the above... a different story.
Sure.
Here's a little list:
-It can be a good practice to unstring your bow between uses so that it doesnt develop "set" where the limbs remain bent. This one mostly depends on what the bow is made of. Modern materials and laminated woods tend to not have this problem, pure woods do, and horn bows do.
-Use a bow stringer when possible, because otherwise you can risk putting unnessesary strain on the bow. Good ones can go for as little as $10.
Heres the one I use
Amazon Link: https://www.amazon.com/dp/B002L9C7SQ/ref=cm_sw_r_cp_apa_i_RRtHDbPX4783V
-Dont leave it in direct sunlight, or uber high heat.
String and jig on Amazon. Nice and simple.
Stringer that's easy to use, inexpensive, and robust: https://www.amazon.com/dp/B002L9C7SQ/
Accessories are up to you. Depends on how you plan to shoot - rest vs shelf? Glove vs tab?
Arm guard is a must, pick one you can afford. A cheapo caribiner is nice for keeping your string twisted when your bow is unstrung. A recurve case is a must, to keep all your kit together, no problem with a zippered soft case - especially one that comes with an arrow tube.
String wax is cheap and good to have for both the string and keeping your arrow points from coming unscrewed all the time. A quiver is also a must, and the style is up to your preference.
There's probably a lot more, but this is what I could think of as immediate buys.
Yeah I found one here for $10.
Same thing as the others posted, but this time it's actually an amazon link: http://www.amazon.com/Bow-Trainer-Strength-Training-Archers/dp/B00B7PFG38/ref=sr_1_1?ie=UTF8&qid=1453405938&sr=8-1&keywords=bow+trainer
https://www.purehockey.com/product/bauer-tuuk-ls-edge-travel-kit/itm/12543-2/?gclid=CjwKCAiA4t_iBRApEiwAn-vt-9ZlgWRBRbcxnA09CagfRsJ303_R58IonRfYG1qV_3PElXG7nrQluhoCz1UQAvD_BwE
https://www.amazon.com/Sports-Replacement-Steel-Blade-Case/dp/B0743NL9G9/ref=pd_aw_lpo_200_tr_img_2?_encoding=UTF8&psc=1&refRID=GXZCSGY926MV3AG4TA03
https://www.amazon.com/Sports-Replacement-Blade-Carrying-Pouch/dp/B07HR7TW8Z/ref=pd_aw_sbs_200_2/145-8208360-4136656?_encoding=UTF8&pd_rd_i=B07HR7TW8Z&pd_rd_r=f993896d-28e8-11e9-96dd-17867d353d36&pd_rd_w=Tu6iY&pd_rd_wg=W9oKA&pf_rd_p=aae79475-6dc9-4a12-80e8-27b63108fa72&pf_rd_r=GXZCSGY926MV3AG4TA03&psc=1&refRID=GXZCSGY926MV3AG4TA03
Step steel is too big for the boxes
I use CA glue (Super Glue) on my vanes and have had zero issues with vanes coming off (except when I was tuning a new rest and button, but that's another issue). I use this jig and it takes about 3 minutes per arrow, then I set it aside to cure for an hour.
http://www.amazon.com/Bow-Trainer-Strength-Training-Archers/dp/B00B7PFG38/ref=sr_1_1?s=sporting-goods&ie=UTF8&qid=1420577684&sr=1-1&keywords=archery+strength+trainer
i have a hoyt charger, which is a compound bow
I think you are over paying for tools. I think I went you could have all the tools you need to get 99% of anything done with your bike. And In less time then it would take to get your bike to the shop.
If there's no height adjustment possible and it's fitted properly then I can only imagine you'd need to lower the D Loop/Nock point. Photographs are difficult to judge it from. When I set my bow up I used a bow square to align the nocking points so that the arrow is square with the centre of the Berger holes (the two holes in the riser ahead of the arrow rest). But I do have a height adjustable rest which allowed some fine tuning.