Reddit mentions: The best autmotive daytie running lamp modules
We found 5 Reddit comments discussing the best autmotive daytie running lamp modules. We ran sentiment analysis on each of these comments to determine how redditors feel about different products. We found 3 products and ranked them based on the amount of positive reactions they received. Here are the top 20.
1. RioRand 2-Piece Waterproof Aluminum High Power 6W 6000K Xenon Slim COB LED Daytime Running Light (White)
- RioRand 2 pcs Set Waterproof Aluminum High Power 6W 6000K Xenon White Slim COB LED DRL Daylight Driving Daytime Running Light Lamp For Car SUV Sedan Coupe Vehicle
- Package includes: 2 pieces of COB LED daytime running light? Emit Super bright xenon white light, high intensity
- Enhance lighting in rainy and foggy days & brings more safety
- Low power consumption and vibration resistant
- Easy installation, easily stick on with self-adhesive tape
Features:
Specs:
Color | White |
Height | 3.1 inches |
Length | 9.6 inches |
Release date | November 2016 |
Size | other |
Width | 1.1 inches |
2. GTinthebox 2PC Flexible Switchback Dual-Color White & Amber LED Fork Turn Signal DRL Daytime Running Light Waterproof Adjustable Stips Bars kit Universal Fit Motorcycle Bike
- - New design with Swithback colors (White & Amber)
- - Operation: 12V DC, Constructed from waterproof & distortable soft Glue
- - Adjustable size for almost all motorcycle with Forks
- - Each individual strip Powered by 36 Super bright LEDs with 120 degree viewing angle for white and amber color
- - Fitment: Work for most Motorcycles such as Honda, Kawasaki, KTM, Suzuki, Yamaha and many other brands as well
Features:
Specs:
Color | White & Amber |
Number of items | 2 |
3. iJDMTOY OEM Fit 6-LED High Power LED Daytime Running Lights DRL Kit For 2013-up Scion FR-S FRS
Compatible with 2013-2016 Scion FR-S/Toyota FT86 or GT86 (excluding TRD edition)6 pieces high power LED lights each lamp (7.5W high power output each side)Super Bright for DRLImprove safety and style!This is an iJDMTOY Trademark Brand product, exclusively available at iJDMTOY
Specs:
Color | Xenon White |
Number of items | 1 |
🎓 Reddit experts on autmotive daytie running lamp modules
The comments and opinions expressed on this page are written exclusively by redditors. To provide you with the most relevant data, we sourced opinions from the most knowledgeable Reddit users based the total number of upvotes and downvotes received across comments on subreddits where autmotive daytie running lamp modules are discussed. For your reference and for the sake of transparency, here are the specialists whose opinions mattered the most in our ranking.
I'm going on my first adventure tour next week, possibly on the Tennessee TAT (Trans America Trail) but I heard it's mostly paved and boring so if it is, we'll ditch and go elsewhere.
I'm used to riding a street bike and being very visible from all angles, so I wanted more visibility from the front end for oncoming traffic and people turning out in front of me. Additionally, I wanted to free up some power from the alternator for other uses (heated gear, charging phone, etc) so here is my solution:
http://www.cyclopsadventuresports.com/3600-Lumen-H4-H6M-LED-Headlight-bulb-_p_83.html
Power savings: 30W on low, 25W on high beam (yes, it does both). And it's BRIGHT - triple the brightness of the original halogen.
http://www.amazon.com/gp/product/B00C1YI2XA/ref=as_li_qf_sp_asin_il_tl?ie=UTF8&camp=1789&creative=9325&creativeASIN=B00C1YI2XA&linkCode=as2&tag=itrencom-20&linkId=SOF223PIZIJ72O2U
Power used: 6W per side, for a total of 12W. This means I'm still ahead by 18W when the low beam is on and 13W when the high beam is on. I obviously can't run massive accessories but every little bit helps with the OEM stator on the bike. IMPORTANT NOTE: I removed the cheap Chinese double-sided tape and used high quality 3M automotive grade double-sided tape to be sure they stay put. This required some liquid adhesive remover (you could probably make do with alcohol) and some new tape so perhaps my cost on these was $0.25-$0.50 higher than I stated above.
To wire them up I simply pulled the headlight and used a DVM to check which wires were switched power and soldered them directly to the headlight wire. Since I'm no longer using the OEM halogen bulb, the wires have the extra current capacity necessary and it won't be an issue. Then neatly zip tie the wires so that they won't pull out of the LED strips or be under stress, and out of the way of any moving parts, and voila - you have yourself a nice lower power but VERY bright setup.
You can't tell in the photos but the LED strips are incredibly bright.
I got these: https://www.amazon.com/dp/B07D6JN2SJ?ref=ppx_pop_mob_ap_share
I later swapped them for more expensive blinkers unfortunately... check my post history two pictures back if you want to see what they look like.
Gotchas:
Other than that, they worked and were brighter than I thought. Hope this helps!
They are just DRL LED strips that came with the car as one of the add-ons you could get from Scion. I think they were like $400 extra or something ridiculous. But these replica ones look identical and I'm sure are just as good
https://www.amazon.com/iJDMTOY-Daytime-Running-Lights-2013-up/dp/B00DEK56AM
I ordered these waterproof, aluminum encased LED light strips from Amazon @ $9 shipped with Prime: http://www.amazon.com/gp/product/B00C1YI2XA/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
Based on the reviews and videos, one should be plenty for the interior of the cooler. I'm planning to drill a hole in the top center of the side opposite the drain where I will insert this waterproof connector and seal it with epoxy.
EDIT: http://www.adafruit.com/products/743
I had the same reservations about compromising the cooling integrity of the very expensive cooler I just bought. I realized though that the drain isn't insulated so I expect the effects to be minimal.
I'll mount whatever power source I choose on the outside of the cooler using velcro. Still haven't decided which way I'll go.
Thanks! My air filter is stock. What i did is remove the 2 cylinder inside to make more air getting sucked. Then spray the grille with black matter paint. By the way, heres the link below
GTinthebox 2PC Flexible... https://www.amazon.com/dp/B07D6JN2SJ?ref=ppx_pop_mob_ap_share