Reddit mentions: The best automatic irrigation tubing
We found 8 Reddit comments discussing the best automatic irrigation tubing. We ran sentiment analysis on each of these comments to determine how redditors feel about different products. We found 7 products and ranked them based on the amount of positive reactions they received. Here are the top 20.
1. MIXC 1/4 inch Blank Distribution Tubing Drip Irrigation Hose, 50ft Roll
- MIXC drip hose made by high quality. It can be left out year-round, buried or on the surface, in any weather.
- Flexible: Industry leading flexibility allows tighter turns with fewer elbows for fast, easy installation in garden, flower bed, ground cover or other landscaped areas.
- Function:Use as the main line in a small Drip irrigation system or to branch off from larger 1/2" Drip tubing to micro-watering system.
- Compatible with most brands of 1/4" Barbed Fittings, Spot Watering Emitters, Micro-Bubblers, Misters and Sprays.
- Perfect for small, narrow and tight planting areas, as well as areas with tight curves or many switchbacks. Designed for underground or above-ground installation.
Features:
Specs:
Color | Black |
Size | 50ft |
2. One Stop Outdoor (100' ft Roll) - USA Made - 1/4-Inch x Irrigation/Hydroponics Dripline with 6-Inch Emitter Spacing (Brown) (100' Foot Roll)
- FIT: Use With 1/4" Fittings - 6 inches pre-inserted emitter spacing, 1/2 GPH flow rate from each emitter, 100 feet Length
- DURABLE: Resistant to chemicals and fertilizers commonly used in landscaping
- EASTY TO USE: Flexible tubing for easy installation - Attach to 1/2" Drip tubing with 1/4" barbed fittings; compatible with most 1/4" fittings
- OPERATING PRESSURE (PREVENT LEAKS & BLOWOUTS): 10-25 PSI (Minimum of 150 mesh filtration)
- EMITTERS: Flow regulated, self flushing inline emitters deliver equal flow at a wide range of operating pressures
Features:
Specs:
Color | Brown |
Size | 100' Foot Roll |
Weight | 1.21 Pounds |
3. KORAM 1/2” Drip Irrigation Tubing Blank Distribution Hose PVC 13mm/0.51” Inner Diameter with Plant Garden Labels, 100ft Roll
【Professional Drip Irrigation Tube】: Insert drippers directly into tubing line or run lateral lines off of the poly as a main distribution line.【Temperature Resistance】: KORAM premium quality PVC tubing exhibits a combination of outstanding environmental stress-cracking resistance and burst ...
Specs:
Color | Black |
Height | 12.992125971 Inches |
Length | 12.992125971 Inches |
Size | 1/2” tubing 100ft |
Weight | 6.59 Pounds |
Width | 4.724409444 Inches |
4. Genova Products 910071 3/4-Inch x 100-Foot 100 PSI Poly Cold Water Plumbing/Irrigation Pipe Tubing Roll
Ideal for irrigation and underground sprinkler systemsMade in the USACold water applications onlyNSF Approved100 PSI Pressure Rating
Specs:
Height | 30 Inches |
Length | 6 Inches |
Size | 0.75 Inch |
Weight | 7 Pounds |
Width | 30 Inches |
5. Rain Bird T70-500S Drip Irrigation 1/2" (0.700" OD) Blank Distribution Tubing, 500', Black
Rugged, flexible tubing that's easy to unroll and stake in garden, flower bed, ground cover or other landscaped areasProfessional-grade; won't clog and requires no maintenanceConnects easily to your faucet, garden hose, or existing underground sprinkler head (with Rain Bird conversion kits)Extra fle...
Specs:
Color | Black |
Height | 3 inches |
Length | 19.5 inches |
Number of items | 1 |
Size | 500' |
Weight | 2 pounds |
Width | 19.5 inches |
6. KORAM Drip Irrigation 1/4 Blank Distribution Tubing Drip Watering Hose 50ft Roll with Plant Tag, Brown
🌻 RUGGED & FLEXIBLE – KORAM Irrigation tubing easy to unroll and stake in garden, flower bed, ground cover or other landscaped areas🌻 SOFT & DURABLE MATERIAL - Extra flexibility for kink-free installation, unmatched resistance to chemicals, algae growth and UV damage🌻 SIMPLE & EFFICIENT -...
Specs:
Color | Brown |
Height | 2.52 Inches |
Length | 7.01 Inches |
Size | 1/4” tubing 50ft |
Weight | 0.7 Pounds |
Width | 5.91 Inches |
7. Rain Bird T70-50S Drip Irrigation 1/2" (0.700" Blank OD) BlankDistributionTubing,50',Black
Rugged, flexible tubing that's easy to unroll and stake in garden, flower bed, ground cover or other landscaped areasProfessional-grade; won't clog and requires no maintenanceConnects easily to your faucet, garden hose, or existing underground sprinkler head (with Rain Bird conversion kits)Extra fle...
Specs:
Color | Black |
Height | 4.82 Inches |
Length | 19.25 Inches |
Number of items | 1 |
Size | 50', |
Weight | 2 Pounds |
Width | 19.25 Inches |
🎓 Reddit experts on automatic irrigation tubing
The comments and opinions expressed on this page are written exclusively by redditors. To provide you with the most relevant data, we sourced opinions from the most knowledgeable Reddit users based the total number of upvotes and downvotes received across comments on subreddits where automatic irrigation tubing are discussed. For your reference and for the sake of transparency, here are the specialists whose opinions mattered the most in our ranking.
My 6 has so much creek. So what I did was...
1/4th inch drip tube in the inner seal atop my doors
That worked for a bit but the squeaky noises returned.
Next I used Gummi Pflege on the inside of every single seal within the door. So what I mean is. On the ones that attach to the body, but more importantly I spread open every one on the door and put a generous coating
Lastly,
I put Sailkote all over a rag, I mean soaked it, then rubbed it all over the felt side of the upper door seal that touches the body.
This can be purchased for a lot less with some hunting. I paid 12.99 at a local marina store
I got the drip line that's a drip every 6 inches. In my raised bed that's 2 x 12 ft, I had three lines of the drip line going down the bed. The automatic timer had the drips going 15 minutes twice a day. The automatic drip line + mulch on top made the garden totally easy and worked great for me since I don't get a chance to do any gardening during the work week due to long hours and a long commute.
Automatic Watering System ($35): https://smile.amazon.com/Raindrip-R560DP-Automatic-Container-Hanging/dp/B00J2NRUBI
Drip Line 6-inch spacing ($17): https://smile.amazon.com/100-Feet-Irrigation-Hydroponics-Dripline-Emitter/dp/B0746837DL
Straw Mulch ($21): https://smile.amazon.com/EZ-Straw-Seeding-Mulch-Tack/dp/B00GRSV936
If its a small-ish pump, it will likely have a 1/2" barb fitting to connect Poly or PVC hose to it. Use PVC hose for small setups as its more flexible and easier to work with.
https://www.amazon.com/Koram-Irrigation-Tubing-Distribution-Diameter/dp/B01LSC84ME/
you can buy it in small lengths at hardware and garden stores if you just need less than 100ft, but its much cheaper by the roll if you will ever use it.
If you are only watering a few plants, just run the hose from the pump, and out next to your plants (within a few feet).
Then you poke driplines into the hose near each plant (I like the brown stuff from home depot, it seems to seat better: http://www.homedepot.com/p/DIG-1-4-in-x-100-ft-Vinyl-Micro-Drip-Tubing-B38100/100212036).
This is a pain until you get the hang of it - First cut a length of the dripline to get to your plant, then cut one end off at a sharp angle (at least 45deg) then you need something to poke a small hole in the PVC hose, I use a nail punch that has been sharpened to make puncturing the tubing easier. You poke a hole in the tubing at an angle toward the pump, then quickly (and forcefully) push the angled dripline end into the hole in the hose. it will seat the first time you run water through it.
put a drip stake at the end of each dripline like this-
https://www.amazon.com/Grodan-Dripper-Stake-Degree-Bag/dp/B008UFC0B4
repeat at each plant.
put a hose clamp on the hose where it attaches to the pump, and crimp the other end so water/nutrients dont just go rushing out the end. you can just fold the hose over a couple times and zip tie it, or get a 1/2" plug and a hose clamp.
These are GREAT connetors. They come in multiple diameter sizes too.
Here is the proper tubing too. Again they come in different diameters.
Tubbing: http://www.amazon.com/dp/B000BVS1YK/
Connector: http://www.amazon.com/dp/B003WJRG30/
Cutters: http://www.amazon.com/dp/B000HSAPR8/
It's this one.
Inside diameter of .6"
DIY all the way.
You have two watering areas. front and rear. Front has three sections, rear has two. You will most likely need two timers, unless you can bring a hose from the front to the back.
I just rebuilt my irrigation system to drip. 4 raised beds, 20x 5 gallon buckets, and hopefully more soon. Let me know if you have any questions on this, just doing a data dump here.
I am assuming your water comes from a hose. Get a cheap hose timer, (i'm just going to link to some simple stuff on amazon, not the exact thing you should buy, you can get a lot at home depot and it might be cheaper there) https://www.amazon.com/Orbit-Single-Programmable-Standard-Packaging/dp/B004INGS8S you will probably need two.
Get some 1/2" irrigation tubing. This will run the majority of water. Think of this as the main line. https://www.amazon.com/Rain-Bird-T70-50S-Irrigation-Distribution/dp/B00J9Q2TC8/ref=sr_1_4?s=lawn-garden&ie=UTF8&qid=1521909237&sr=1-4&keywords=1%2F2+inch+irrigation+tubing
You will need a hole punch (this was a lot cheaper at home depot) https://www.amazon.com/Drip-Irrigation-Standard-Tubing-Punch/dp/B0035LSREW/ref=sr_1_5?s=lawn-garden&ie=UTF8&qid=1521909306&sr=1-5&keywords=1%2F2+inch+irrigation+tubing+hole+punch
Then you will need the smaller tubing. This will bring the water from the main 1/2" line to each plant. https://www.amazon.com/KORAM-Irrigation-Distribution-Tubing-Watering/dp/B013WJYKZQ/ref=sr_1_5?s=lawn-garden&ie=UTF8&qid=1521909338&sr=1-5&keywords=drip+irrigation+tubing
Then you will need some emitters. There are a ton of options, I would recommend going to home depot to browse. https://www.amazon.com/s/ref=a9_asi_1?rh=i%3Alawngarden%2Ck%3Adrip+irrigation+emmiters&keywords=drip+irrigation+emmiters&ie=UTF8&qid=1521909391
For my emitters I use mostly drip but in a couple areas I use sprayers.
You are going to need some other random parts, and will need to take trips to the hardware store for them because if you are like me you measure once and cut twice. You might need T connectors, you will need the adapter to fit the hose to your water times, maybe a pressure regulator, and some hose terminators for the main line.
I am going to follow up with another comment on installation.
[edit] More detail on connectors
You will need the 3/4 to 1/2 connector. Check this list for a bunch of the connectors. I didn't need a pressure regulator because I have shit water pressure. But you might as too high water pressure is bad.
https://www.homedepot.com/b/Outdoors-Garden-Center-Watering-Irrigation-Drip-Irrigation-Drip-Irrigation-Fittings/N-5yc1vZbx4u