Reddit mentions: The best bathtub faucets
We found 13 Reddit comments discussing the best bathtub faucets. We ran sentiment analysis on each of these comments to determine how redditors feel about different products. We found 9 products and ranked them based on the amount of positive reactions they received. Here are the top 20.
1. Delta Faucet RP17454 Tub Spout - Pull-Down Diverter, Chrome,0.5
- Genuine Delta repair part
- Pull down to divert
- 6 in. total length
- Also available in Chrome/Polished Brass, Polished Brass and White
- For technical assistance, contact 1.800.345.DELTA
Features:
Specs:
Color | Chrome |
Height | 2.6 Inches |
Length | 10 Inches |
Number of items | 1 |
Size | .5 |
Weight | 1.22 Pounds |
Width | 6 Inches |
2. Opmnla 16A On Off Push Button Switch Jetted Whirlpool Jet For Bath Tub Spa Garbage
- Material: ABS, PVC, Stainless steel
- Rated current: 16A
- Rated voltage: 125-250V
- Pin width: 6.3mm
- Package Included: 1 x Air Button. 1 x 1m hose 1 x Air pressure switch rated at 16amp,125-250V
Features:
3. Intelligent Thermostatic Faucet Shower Mixing Valve Smart Control Temperature Faucet
- copper body and core
- polished surface always as new
- constant temperature
- easy to install and operate
- anti-scald safer
Features:
Specs:
Color | Silver |
Size | 200-300mm |
4. Lightinthebox Wall Mount Two Handles Bath Tub Faucet Antique Inspired Solid Brass Finish Phone Unique Designer Two Spouts Bath Tub Mixer Taps with Handheld Shower Head Lavatory Bar Plumbing Fixtures
- Solid brass construction to ensure long time lifespan
- Durable ceramic valves to avoid dripping
- Two cross handle and one diverter for better water control
- Install hole distance: 5-1/2-Inch to 7-1/2-Inch widespread
- Special personal hand shower with 59 inch hose
Features:
5. Moen 3931 Replacement 5.5-Inch Tub Diverter Spout with 1/2-Inch Slip Fit Connection, Chrome
VERSATILE DESIGN: Chrome finish is highly reflective for a mirror-like look that works with any decorating styleCONNECTION SIZE: 1/2-inch CC connectionsTUB SPOUT LENGTH: 5.5-InchDIVERTING: Lift rod included to allow stream to flow though tub or up to showerheadORIGINAL EQUIPMENT MANUFACTURER: Authen...
Specs:
Color | Chrome |
Height | 5.5 Inches |
Length | 3.38 Inches |
Number of items | 1 |
Size | Pack of 1 |
Weight | 0.47 Pounds |
Width | 2.94 Inches |
6. Peerless RP47841BN Tub Spout for Pull-Up Diverter, Brushed Nickel
Designed exclusively for Delta faucetsMade to original specificationsRigorously tested to ensure quality performanceADA compliant when installed properlyBrushed Nickel
Specs:
Color | Brushed Nickel |
Height | 4 Inches |
Length | 6 Inches |
Number of items | 1 |
Width | 3.5 Inches |
7. Delta Faucet RP17453 DELTA TUB SPOUT, One Size, Chrome
Genuine Delta repair partCoordinates with Innovations bathroom collectionPull down to divert and Sweat onto 1/2" C.W.T. or thread onto 1/2" IPSSweat onto 1/2" C.W.T. or thread onto 1/2" IPS6-Inch total length and Coordinates with the Delta Classic CollectionGenuine Delta repair partPull down to dive...
Specs:
Color | Chrome |
Height | 3.5 Inches |
Length | 3.5 Inches |
Number of items | 1 |
Size | One Size |
Weight | 0.59 Pounds |
Width | 7.25 Inches |
8. Delta Faucet U1072-PK Diverter Tub Spout, Chrome
ChromeRigorously tested to ensure quality performanceSee what Delta can do5 1/4 Inches Diverter Tub SpoutTimeless Design For Today's Homes
Specs:
Color | Chrome |
Height | 5.9375 Inches |
Length | 5.9375 Inches |
Number of items | 1 |
Size | .5 |
Weight | 0.7 Pounds |
Width | 2.53125 Inches |
9. Pfister RT6-5DFC Kenzo 2-Handle Waterfall Roman Tub Trim in Polished Chrome
- Meets ADA/ANSI A117.1 requirements, ensuring accessibility to all disabled persons
- Pforever Seal—advanced ceramic disc valve technology with a never leak guarantee
- 3-Hole installation
- Waterfall spout delivers a gentle cascade and displays the natural beauty of flowing water
- Spout and handles included
Features:
Specs:
Color | Chrome Finish |
Height | 4 Inches |
Length | 14.1 Inches |
Number of items | 1 |
Weight | 0.1 Pounds |
Width | 13.6 Inches |
🎓 Reddit experts on bathtub faucets
The comments and opinions expressed on this page are written exclusively by redditors. To provide you with the most relevant data, we sourced opinions from the most knowledgeable Reddit users based the total number of upvotes and downvotes received across comments on subreddits where bathtub faucets are discussed. For your reference and for the sake of transparency, here are the specialists whose opinions mattered the most in our ranking.
If you don't want to remove it, you need something like this:
http://www.amazon.com/Faucet-RP17454-Pull-Down-Diverter-Chrome/dp/B000CO2NEA/ref=sr_1_3?ie=UTF8&qid=1420086031&sr=8-3&keywords=delta+spout
Whats there is a delta tub spout adapter, pretty common part. They also make the tub spout easy to fit tight to the wall.
If the tub spout is removable (some are glued, some are threaded on), you can replace it with something like this: tub spout. Then you can attach pretty much any flexible hosed shower attachment to the spout.
can you take a picture of your control panel on the tub?
Typically there will be 3 buttons I believe. 2 to adjust airflow/nozzle pressure and one to turn it on and off. When you push the button it will actually be pretty hard to push because it's essentially pumping air into a tube.
It would also help if you could take off the panel and take a picture of what's coming out of the back of the control panel. I would expect to see 1 tube that comes off the panel and goes to a box near the motor. That will be the control for the pump. Here's is a standalone assembly to give you an idea on what it should look like:
https://www.amazon.com/Opmnla-Button-Switch-Whirlpool-Garbage/dp/B077GW5W9V/
I don't get it. It still takes fiddling with the damn thing to get the correct temperature. Just use one like these and you're done. Even has a nifty anti-blister safety button at 100^o F.
Can you give a side profile shot of the faucet?
It looks like a tub faucet install, in which case you could install something like this
http://www.amazon.com/LightInTheBox-Wall-mount-Handles-Faucet-Antique/dp/B004X9J1D6/ref=sr_1_4?s=kitchen-bath&ie=UTF8&qid=1396015904&sr=1-4&keywords=tub+faucet
Granted the reviews on amazon say this one in particular is a piece of junk, but if the distance between the hot and cold is the same as a bath installation, there are plenty of other manufacturers/models.
Just cut the end of the 1/2 copper pipe off and use a slip fit tub spout with a diverter on it.
chamfer the sharp end of the cut pipe to avoid cutting the O ring seal inside the slip fit spout, you can use a file or sandpaper.
A little lube on the O ring is good, you can use liquid soap
A common error on spouts is people don't caulk around the pipe where is passes through the tub wall, make sure the hole around the pipe is caulked for a watertight seal.
Moen slip fit tub spout with diverter.
http://www.amazon.com/Moen-3931-Diverter-Spout-Chrome/dp/B000UNVH5O/ref=sr_1_2?ie=UTF8&qid=1407526880&sr=8-2&keywords=moen+slip+fit+tub+spout
:) faucet example
It would be bizarre if he really forces you to find an exact match... as if anyone would ever know the difference. If you think its just the tub spout, I would ask to replace it with something like this: https://www.amazon.com/dp/B004DQXTQO/ref=cm_sw_r_cp_apa_zknMAbH164EC6
Just make sure that's the same kind of spout you have: https://www.plumbingsupply.com/info-tubspouts.html
Delta tub spout on Amazon.
We had this for years even after replacing the cartridge and the faucet with a cheap one from Home Depot. Finally fixed it about a month ago and watched my water bill drop by 2,000 gallons. The answer was finding a tub spout where the pressure of the water pushed against the valve. I used the Delta RP17453 and it solved the issue immediately. Even better was that it paid for itself in the first month. https://www.amazon.com/gp/product/B000UB7VQ0/ref=od_aui_detailpages00?ie=UTF8&psc=1
Here is a basic list of items in the project and where they can be found if you're interested:
Wall Faucets
Wall Faucet Valve Assembly
Bathtub Faucet
Bathtub Faucet Valves
Shower Panel
vessel Sinks
Sink Drain Assembly
Square Tile Drain In Shower
Shower Curb Product
Shower Pre-Pitch Slope Product
Shower Pan Slope Product
Shower Weep Hole Protector
Shower Niche Insert
High Power Exhaust Fan
Vanity On this, I negotiated with the seller since I didn't like the sinks/counter/mirrors that were included. They sold me the vanity only for a lesser price than advertised. I purchased the granite for the vanity/tub/privacy wall separately.
Shower Tiles are 12x24 and were purchased at Lowes, shower mosaic tile at HD
*Flooring tiles 6x24 were purchased at HD. Grout is "bone" color and also at Home Depot.
If pics would help, I'll be able to get them tomorrow. For the time being...
tl;dr:
-----
My girlfriend recently moved from an apartment into a rent house. Its an old house and needs a few things, but its solid for the most part. One area we are both fairly in agreement on is trying to get a shower in here. We have talked to the landlord, and he has no problems with it assuming we don't open the wall.
I know the easiest option would be getting a hand shower and mounting it onto the wall. Worst case scenario, this is what we will do, but we would much prefer using the shower head we used in her old apartment.
Appearance isn't a big deal, but functionality is. Personally, I don't want to do anything we can't take with us, but if something fully permanent is the only real option, that's the route we will take.
Right now, what I have in my head is a tub spout with a diverter leading into a short flexible hose. The hose then connects to a shower arm extension finally connecting to the shower head. The arm will be mounted to the wall with the pipe clamps that screw into the wall.
Does anyone see where my idea will fail? I recognize it will be ugly as sin, but between the curtain hiding it, this making the bathroom far more usable, and the fact that it is some approximation of removable means in my mind it is going to be the most straight forward, inexpensive way of accomplishing what we want.
All told, we are trying to keep this under $100-150, so buying a $500+ exposed pipe shower isn't really an option.