Reddit mentions: The best blazed tools
We found 4 Reddit comments discussing the best blazed tools. We ran sentiment analysis on each of these comments to determine how redditors feel about different products. We found 2 products and ranked them based on the amount of positive reactions they received. Here are the top 20.
1. K&S Precision Metals 9862 Round Brass Rod, 1.5mm Diameter X 300mm Long, 5 Pieces per Pack, Made in The USA
- Alloys 260 1/4 hard ASTM B134
- High Quality; Pure Brass
- REACH/ROHS/Hazardous Minerals Compliant
- Made in the USA
Features:
Specs:
Height | 0.059055 Inches |
Length | 11.811 Inches |
Number of items | 5 |
Weight | 0.066 Pounds |
Width | 0.059055 Inches |
2. Klein Tools 80014 Electrician Tool Kit With an Array of Tools and Eye Protection, Comes in 8-Pocket Leather Tool Pouch, 14-Piece
A great assortment of tools for the electricianContains four pliers, five screwdrivers, one tape measure, a wire stripper/cutter, a pair of protective eyewear, an 8-pocket leather tool pouch and an adjustable tool belt8-Inch (203 mm) Heavy-duty long-nose, side-cutting pliers (D203-8)High-leverage si...
Specs:
Height | 5.6 Inches |
Length | 15.6 Inches |
Number of items | 1 |
Weight | 8.64 Pounds |
Width | 13 Inches |
🎓 Reddit experts on blazed tools
The comments and opinions expressed on this page are written exclusively by redditors. To provide you with the most relevant data, we sourced opinions from the most knowledgeable Reddit users based the total number of upvotes and downvotes received across comments on subreddits where blazed tools are discussed. For your reference and for the sake of transparency, here are the specialists whose opinions mattered the most in our ranking.
The Chassis: Most of the handle is MHS v2 (where the leather wrap is), and then both ends adapt up to MHS v1. Because of this I ended up going with Goth 3D chassis parts that are 0.99 OD. But they are modular pieces, so you pick and choose which ones you want. I needed to use spacers between some of the parts so that I could route the cables through, so I put spacers between all of them to look cohesive. Other than the Goth 3D parts, there are a few Skywampa, TCSS, and other various hardware bits. Everything is linked below.
Goth 3D
Excluding the crystal chamber parts, the Goth 3D chassis parts were all white, which was a mistake. Should've done black. So I painted all of them in a few steps. 1st was paint them flat black. 2nd was paint them graphite. 3rd was a layer of silver leaf Rub'n Buff thinned with enamel thinner and applied to just the outside to help it look more like metal.
Here are the other pieces of the chassis with explanations:
The Skywampa and TCSS discs are treated with a combination of Aluminum Black and Ebony Rub'n Buff to give them that "weathered" look.
Here are the various hardware bits to connect all of it:
He gives an instruction sheet with it. Let me snap a picture.
https://imgur.com/a/YMTTaj1
Sorry about the cell phone pictures. I don't have a scanner anymore since I went to a cheap color laser printer.
edited to say: I need to break down my MK3s and put in those tubes but haven't done it yet as I'm waiting to finish doing upgrades to my ender3 and setup my anycubic photon, basically I can't be without a 3d printer and have been limping by with my MK3s with the jamming issue. I currently follow this guide: http://projects.ttlexceeded.com/3dprinting_jams.html
and bought these brass rods on Amazon which is working perfectly: https://www.amazon.com/gp/product/B01C6LUO5Q
Cheap-handled Kleins:
https://www.amazon.com/Klein-Tools-80014-Electricians-14-Piece/dp/B0009OIJKA
Cheap-handled Knipex:
https://www.amazon.com/5-Pc-Starter-Set-2Pack/dp/B013OT5VYI
Cheap-handled Channellock:
https://www.amazon.com/Channellock-PC-2-convenient-Leverage-Diagonal/dp/B004WQZWGK
Cheap-handled Snap On!
https://store.snapon.com/Pliers-and-Cutter-Sets-3-pc-Pliers-Set-P886052.aspx
--------------------------------
Now, most of them make good handled tools:
https://www.amazon.com/gp/product/B001094GLY/ref=s9_acsd_simh_hd_bw_b2JwQ_c_x_3_w
But you pay extra for them.