Reddit mentions: The best force gauges
We found 3 Reddit comments discussing the best force gauges. We ran sentiment analysis on each of these comments to determine how redditors feel about different products. We found 3 products and ranked them based on the amount of positive reactions they received. Here are the top 20.
1. Sailboat Rigging Tension Gauge from Loos & Co., PT-2 Professional Hands-Free Force Gauge for Tensioning and Tuning of Shrouds, Cable Rigs, Wire Rope Standing Rigging, and Forestays, for 3/16, 7/32, and ¼ inch Cable Diameter
- Measures tension in cables and rods to check for proper setup in sail rigging and supporting cables for large tents, radio towers, and other structures
- Analog gauge shows present tension in pounds (lb.)
- Measurement accuracy of + or - 5 percent
- Measures tension from approximately 5 to 25 percent of the cable's breaking strength
- Can remain hooked on the wire during testing while tension is adjusted
Features:
Specs:
Height | 14 Inches |
Length | 7 Inches |
Number of items | 1 |
Size | 2000 lbs |
Weight | 0.86 Pounds |
Width | 4 Inches |
2. Nextech DFS-X500 (500N/110lbf/50kgf) Digital Force Gauge with External S-Beam Load Cell, Peak/Track Mode, Pass/Fail LED,USB Output, Back-Lit Graphic LCD,Metal Enclosure
Made in Thailand. Power adapter/charger input 100-240 volts AC. NiMH rechargeable battery pack inside. Load cell can be mount with single threaded hole on top or with two holes to the side. Please see drawing pictures for mounting instructions.Accuracy better than 0.2% of FS (Full Capactiy) for Capa...
Specs:
Height | 6.2992 Inches |
Length | 2.95275 Inches |
Size | 500N |
Weight | 3.527396192 Pounds |
Width | 1.1811 Inches |
3. Loos & Co. Sailboat Rigging Tension Gauge , PT-3 Professional Hands-Free Force Gauge for Tensioning and Tuning of Shrouds, Cable Rigs, Wire Rope Standing Rigging, and Forestays, for 9/32, 5/16, 3/8 inch Cable Diameter
Measures tension in cables to check for proper setup in sail rigging and supporting cables for large tents, radio towers, and other structuresAnalog gauge shows present tension in pounds (lb.)Measurement accuracy of + or - 5 percentMeasures tension from approximately 5 to 25 percent of the cable's b...
Specs:
Height | 35 Inches |
Length | 10 Inches |
Number of items | 1 |
Size | 4500 lbs |
Weight | 1.95 Pounds |
Width | 4 Inches |
🎓 Reddit experts on force gauges
The comments and opinions expressed on this page are written exclusively by redditors. To provide you with the most relevant data, we sourced opinions from the most knowledgeable Reddit users based the total number of upvotes and downvotes received across comments on subreddits where force gauges are discussed. For your reference and for the sake of transparency, here are the specialists whose opinions mattered the most in our ranking.
Get one of these and use it.
https://www.amazon.com/Loos-Cableware-Tension-Gauge-Inch/dp/B0000AXNQV?th=1
You need something like this
Note: you need both the load cell and the gauge. The load cell takes all the load, and converts it to a voltage that the gauge can measure. You buy the load cell in the weigh range you are dealing with.
If you are messing with hundreds of pounds, you need to be careful. Thats a lot of force, and injuries and property damage can result.
The bottom one is a tension gauge (like it says). Still made: http://www.amazon.com/Loos-Cableware-Tension-Diameter-Measurement/dp/B0038YY3W6 (And worth a few bucks, too!)