Reddit mentions of 3M Trizact Performance Sandpaper, 03064, 3-2/3 in x 9 in, 3000 grit

Sentiment score: 2

Reddit mentions: 2

We found 2 Reddit mentions of 3M Trizact Performance Sandpaper, 03064, 3-2/3 in x 9 in, 3000 grit. Here are the top ones.

Buying options

Features:

POLISH CLEAR COAT AND PAINT AND RESTORE SHINE - 3000 GRIT is the ideal abrasive for detailed finishing and polishing
FAST, CONSISTENT CUT - Trizact technology delivers fast, extremely consistent cut
SMOOTH REFINED FINISH - Very fine grade abrasive delivers refined finishes to auto clear coats
REDUCE COMPOUNDING - Removes very small scratches to reduce or eliminate need for compounding and reduce polishing time
IDEAL FOR STEP 4 OF THE 3M BODY REPAIR SYSTEM - Finish. The final stage for showroom-grade results: removing small defects, sealing and polishing clear coats and other painted surfaces.
Trizact structured abrasives and its microscopic three-dimensional mineral are designed to remove very fine scratches and leave metal surfaces ready for polishing
Lightweight foam backing provides flexibility and attaches easily to sanding blocks
Excellent for wet sanding to reduce dust and prolong sheet life
Ideal to use with 3M Sanding Blocks; Easy to attach and Remove
Suitable for hand or machine sanding

Specs:

Related categories:

Interested in what Redditors like? Check out our Shuffle feature

Getting a good finish on clear requires three steps:

Cutting - using an aggressive sandpaper (1000-2000) to level out the surface and remove orange peel.
Buffing - using successively finer grits of sandpaper/polishing pads to remove the previous scratches. Sanding grits are typically 2400, 3200, 4000, 6000, 8000, 12000. Each successive grit is sanded 90 degrees to previous. The idea is to remove the scratches from the previous pass, and going across them instead of with them works better. By the time you get to 12,000 you'll have a nice, smooth reflective finish.
Polishing - this is what gives it the shine. Use a polishing compound and wax to give it a mirror finish.

Products I use:

Cutting: 3M Trizact automotive sanding pads. If my clear lays down smooth, I'll start at 3000
Buffing: Sanding pads
Polishing: Novus Plastic Polish - comes in 3 formulas - heavy scratch remove, fine scratch remover, and silicone wax.

Here's how I do it.

Good color matching. You can really smooth out the paint to make it look more seamless with a 3000grit sandpaper. Something like this: https://www.amazon.com/3M-03064-Trizact-Performance-Sandpaper/dp/B005RNGL9O

I found it really improved my alters.