Reddit mentions of ADIMLab Updated Gantry Pro 3D Printer 24V Power with 310X310X410 Build Volume, Resume Print, Run Out Detection, Lattice Glass Platform, Modifiable to Upgrade to Auto Leveling&WiFi

Found it: https://www.amazon.com/ADIMLab-Assembled-Printing-310X310X410-Available/dp/B07CPQQ57D

Very similar to the creality, but even cheaper.

My beautiful wife wants to buy me a kit for my bday, I live on a acreage in Canada so I pretty much am narrowed down to Amazon. I found three kits I like , just wondering if any one could give me some input on which would be the most bang for the buck. I currently own a Anet A8 and in the process of slowly building a Hypercube from scratch, my first build so it's taking a while,. Thanks for the input.

1 - FLSUN Large Size Cube 3D Printers with 260 * 260 * 350mm Large Printing Size,Auto-Leveling System, Heated Bed,Full Gifts,One Roll PLA Filament 1.75mm, Metal Frame CA Stock https://www.amazon.ca/dp/B07J65MM6B/ref=cm_sw_r_other_apa_i_F23CCb114XN6Z

2 - Tevo Tornado 3D Printer Gold Color. Large Printing Size Support Off-line Print. SD Card Reader +Tool Kits + Hotbed + Factory Original Supply and Canadian After-Sale Service (300 * 300 * 400mm) https://www.amazon.ca/dp/B07DFNLRC6/ref=cm_sw_r_cp_apa_i_p33CCbP0VSVXQ

3- ADIMLab 3D Printer Assembled 24V Prusa I3 3D Printing Size 310X310X410 with Heat Bed, Glass, Control Box, MK10 DirectDrive Extruder, PLA, Auto Leveling Upgrade Available https://www.amazon.ca/dp/B07CPQQ57D/ref=cm_sw_r_cp_apa_i_-33CCb371TENB

I use this ADIMlab printer, with Hatchbox PLA. It works fine for what I need it for, but I don't ever get the consistent even layers you have in your pic. I'm still really new to this, though, and so I'm constantly tinkering with slicer settings and hardware adjustments, so maybe I just haven't found the sweet spot yet.

Ahh. I thought you meant $200 less than the one I had linked in another part of the thread. Sorry.

https://www.amazon.com/ADIMLab-Assembled-Printing-310X310X410-Available/dp/B07CPQQ57D/ref=cm_cr_arp_d_product_top?ie=UTF8 is what I thought you meant

Couple of questions. First, I will be getting my first printer and wondering if certain printers use certain programs better?
Second, I want to use the printer to make my own custom board games, (Catan and D&D pieces) do any one printer do a better job with this?
I have no knowledge of how the programming works yet and just want to know what I am getting into before I jump right in.

Edit: The first printer I was looking at was ADIMLab
https://www.amazon.com/dp/B07CPQQ57D/?coliid=I1C3MXODC8HJYO&colid=2YI1JED33NYNA&psc=0&ref_=lv_ov_lig_dp_it

Edit 2: My price range is $300-$850. US Resident, I have a friend who will help me set up if needed.

https://www.amazon.com/ADIMLab-Assembled-Printing-310X310X410-Available/dp/B07CPQQ57D/ref=sr_1_fkmrnull_1_sspa?crid=1YE95FUI0YS8L&keywords=adimlab+3d+printer+assembled+24v+prusa+i3+3d&qid=1555684836&s=gateway&sprefix=adimlab+%2Caps%2C136&sr=8-1-fkmrnull-spons&psc=1

Hello I'm completely new to 3d printing. What wanting to grey a print that will be relatively versatile. I'm pretty decent with electronics but by no means a master. I am familiar with autocar and Autodesk inventor. I'm not sure I'd either program cam print directly yipp a3d printer though. I am looking at this ADIMLab 3D Printer Assembled 24V Prusa I3 3D Printing Size 310X310X410 with Heat Bed, Glass, Control Box, PLA, Auto leveling Upgrade Available https://smile.amazon.com/dp/B07CPQQ57D/ref=cm_sw_r_cp_apa_i_gEvDCbAG5MNYS printer. Is this a good price on this printer? Can I use the wood type filiment in it? What other types of filiment can be used in it?

Anyone know anything about the ADIMLab Gantry i3 Plus, and how it compares to the Creality CR10S? I'm looking to get a second printer next to my Monoprice Maker Select Plus. The ADIMLab looks very comparable to the CR10, with a slightly bigger build volume, and a couple small features that seem nice, but with a price of $380 compared to the CR10S at $520, I'm nervous that it's going to be unreliable or have problems down the road. I'm having trouble finding any reviews of it.

Hey thanks so much for that, I will give these tips a try later and report back. I will check the gears, yes I hace accessed them many times, but never looked for stuff in them. I totally get the love hate thing, I'm the same. Customer service is amazing. Do you have any other printers? I'm not looking at this one: https://www.amazon.com/dp/B07CPQQ57D/?coliid=I23TJAG1PI8YB6&colid=1T62ADCFK8B9Q&psc=0&ref_=lv_ov_lig_dp_it

https://www.amazon.com/ADIMLab-Assembled-Printing-310X310X410-Available/dp/B07CPQQ57D/ref=mp_s_a_1_3?ie=UTF8&qid=1542915406&sr=8-3&pi=AC_SX236_SY340_QL65&keywords=adimlab+3d+printer&dpPl=1&dpID=41CUcYPkqPL&ref=plSrch

Worth the money?

Note that I'm completely new to 3d printing.

These little blocks are 20x20x5 millimeters. The grey was printed with the shown settings, and the white was similar settings, but all travel speeds were set to 30mm/sec.

• Printer: https://www.amazon.com/ADIMLab-Assembled-Printing-310X310X410-Available/dp/B07CPQQ57D/ref=cm_cr_arp_d_product_top?ie=UTF8
  
• Filament: hatchbox 1.75mm +/- 0.03
  
  Things I've tried
  
  
• Switching the filament. I've tried 3 different filaments (all Hatchbox at the same dimensions, but 3 different colors) and all exhibit the same issues.
  
• Re-leveling. I've done the paper test ad-nauseum
  
• Checking my x-steps, y-steps, z-steps, and e-steps. All of these seem perfect as far as my measurement goes. 100mm movement on any axis takes exactly 100mm, and extrusion of 100mm of pla takes exactly that.
  
• Cleaning the nozzle. I don't know if I'm cleaning it exactly right, but I've tried a few times. This is a new printer, so I'm not sure if this would easily be the issue. It never seems to have trouble extruding, though.

Comgrow Creality Ender 3 Pro 3D Printer with Removable Build Surface Plate and UL Certified Power Supply 220x220x250mm https://www.amazon.com/dp/B07GYRQVYV/ref=cm_sw_r_cp_api_i_T4WxDbRVFW44B

I have this one too

Official Creality Open Source CR-10 3D Printer All Metal Frame 12x12x15.5 Inch Build Volume and Heated Bed Includes Glass Bed https://www.amazon.com/dp/B07LG2K55Q/ref=cm_sw_r_cp_api_i_w5WxDbQ11Q2XH

Or cheaper

ADIMLab Gantry 3D Printer 90% Assembled 310X310X410 3D Printing Size with 24V15A Power Heat Bed Glass Control Box Filament Detector, Nozzle Light, Modifiable to Upgrade to Auto Leveling https://www.amazon.com/dp/B07CPQQ57D/ref=cm_sw_r_cp_api_i_r6WxDbR5B2PCQ

All pretty good units

I use the ADIMLAB gantry i3 pro. It is a workhorse and when tuned right can go for a month or more without needing maintenance. It is 370 usd and is HUGE. I use it for cosplay and am currently making a suit of iron man armor.

It is a great first time printer and I couldn’t recommend it more.

The customer support is amazing and couldn’t be better.


https://www.amazon.com/dp/B07CPQQ57D/ref=cm_sw_r_cp_api_i_qlS1DbCFFAEB7

ADIMLab Gantry 3D Printer 90% Assembled 310X310X410 3D Printing Size with 24V15A Power Heat Bed Glass Control Box Filament Detector, Nozzle Light, Modifiable to Upgrade to Auto Leveling https://www.amazon.com/dp/B07CPQQ57D/ref=cm_sw_r_cp_apa_i_TzpHDbYJ9N93K