#767 in Automotive
Use arrows to jump to the previous/next product
Reddit mentions of Amon Tech Windscreen Window Wiper Blade Arm Puller Auto Remover Removal Tool
Sentiment score: 2
Reddit mentions: 3
We found 3 Reddit mentions of Amon Tech Windscreen Window Wiper Blade Arm Puller Auto Remover Removal Tool. Here are the top ones.
Buying options
View on Amazon.comor
- Complete engine timing tool kit for setting the camshaft and crankshaft of Jaguar and Land Rover 2.0 GTDi.
- Application Detail: 2013-2015 Jaguar - XF RWD 2013-2017 Land Rover - Range Rover Evoque
- Plus: Land Rover Discovery Sport 2015>2016, Si4, Freelander 2 2012>2015 Si4. Range Rover Evoque 2011>2016 Si4
- Engine code 204PT
- Equivalent to the following OEM numbers: 303-1600, 303-1595, 303-1521, 303-1521, 303-1594, 303-748
Features:
Specs:
If there is any clicking noise, most of the time electricity isnt causing the problem.
Get yourself something to measure the voltage (Even a lightbulb 12V 21W is enough > Look it up on youtube).
If its ok, replace the motor.
But nyfdup is right. Also check the wiring for the trunk on the left side :) Its easy and if its broken, even you can see it.
If volage AND wiring is ok, replace the motor. Its a very common thing.
BUT! be aware, your wiper doesnt lose that easily
You need a special tool to break it free without destoying the glass..
Tool like that > Amazon
If you have the tools ahead of time (unlike me), I would say it's definitely doable in about an hour.
You'll want a wiper assembly tool like this one:
https://smile.amazon.com/Amon-Tech-Windscreen-Remover-Removal/dp/B01HJBM2WG/ref=sr_1_2_sspa?crid=39LZHU7SU7KN6&keywords=wiper+arm+removal+tool&qid=1557626963&s=gateway&sprefix=wiper%2Caps%2C158&sr=8-2-spons&psc=1
I got mine from my local O'Reilly because I was determined to get it done that day. Otherwise, I would have planned ahead and ordered it.
Then to cut the ends off of the drain, I had to get a long-handled set of needle nose pliers from Walmart like these:
https://www.walmart.com/ip/8-Nose-Pliers-Sbln8p/34771013
I ended up just kind of pulling and tearing those little flaps off. My hands are too big and I couldn't even reach the driver side with scissors. It was so frustrating, but only because I was unprepared... The wiper assembly doesn't just come off, so I let it soak a few times with the PB Blaster. I honestly thought I was never going to get it, so I was pretty ecstatic when it started budging. YouTube is a good resource for this part if you're unfamiliar. Good luck! Let me know if I can help further!
I had this same issue a while back. I used two different items. I tried using a gear puller, but it wouldn't fit below the motor pinion. The claws were too thick. I ended up using a Windscreen Window Wiper Blade Arm Puller to get it going. Then I switched to the gear puller. I forgot what size the gear puller was, but here it was something like the one I linked below. Some heat couldn't hurt as well.
https://www.amazon.com/Pro-Grade-18212-4-Inch-Adjustable-Puller/dp/B002O16UGQ/ref=sr_1_4?ie=UTF8&qid=1523555996&sr=8-4&keywords=gear+puller
https://www.amazon.com/Windscreen-Window-Puller-Remover-Removal/dp/B01HJBM2WG/ref=sr_1_1?ie=UTF8&qid=1523555789&sr=8-1&keywords=windshield+wiper+blade+puller