#20 in Power drill parts & accessories
Use arrows to jump to the previous/next product
Reddit mentions of Bosch GT2000 4-Piece Carbide Tipped Glass, Ceramic and Tile Drill Bit Set
Sentiment score: 3
Reddit mentions: 7
We found 7 Reddit mentions of Bosch GT2000 4-Piece Carbide Tipped Glass, Ceramic and Tile Drill Bit Set. Here are the top ones.
or
- PRECISION: Features Bosch’s unique product design with a precision tip to help solve any bit wandering or bit walking
- QUALITY: This glass and tile set includes a high-quality carbide tip with a reinforced head to reduce stress, prevent bit cracking and the diamond ground cutting edges provide a longer life
- VERSATILE: Perfect for common applications such as relief holes for glass cutting, bathroom and shower installs, drilling and fastening mirrors, setting concrete screws in tile and many more
- RELIABLE: The three flat shank provides superior grip on 5 16 in. bits and larger to prevent slippage. The Bosch Glass & Tile bits are easy to use while still providing best-in-class speed so you can get the job done faster
- INNOVATIVE: Featuring the Bosch branded, innovative geometry allows bits to drill faster. Each bit is clearly labeled so you can select the correct fit for the task. Included drill bit sizes: 1 8 in., 3 16 in., 1 4 in., 5 16 in
- Precision tip - Solves bit wander and bit walking
- 4-Piece set with most common sizes
- High quality carbide with a reinforced head that prevents bit cracking and provides a longer life
- Three flat shank to prevent slippage
- Bosch branded, innovative geometry allows bits to drill faster
Features:
Specs:
| Color | silver |
| Height | 0 Inches |
| Length | 0 Inches |
| Number of items | 1 |
| Weight | 0.08 Pounds |
| Width | 0 Inches |
How to make a bong out of a Hennessy bottle:
1/5th bottles seem to work best. Get a bottle, wash it out, and set aside.
Go to a smoke shop and ask for a downstem and bowl piece. Ideally the down stem will be about 6” long. You can go longer/shorter depending on the angle your hole is made at.
Once you have your downstem, take a tape measure and measure the OSD of the glass. (Outside diameter. In my case the OSD was a hair over 1/2”, so I used a 5/8” drill bit)
Once you know the OSD of the downstem, you’ll need to go to the hardware store and get a drill bit that is at least 1mm larger than the OSD of your downstem. You need a special carbide (or diamond in some cases, ymmv depending on where you go to get the bit) drill bit that is intended for going through glass. They look a bit like this.
Drill your hole. ALWAYS WET DRILL GLASS. Always. Do it in your sink with the water running, and drill at about half-speed. It will take some time to get through the glass. The angle you hold your drill at will determine where and how the downstem sits in the bottle. About a 45 degree angle on the glass where I put my downstem works well.
Once the hole is made, rise the bottle out very well, and dry the outside. Put your downstem in the hole, and use some putty to make the air seal.
Pack a bowl, and enjoy 🙂
here's one of the higher rated sets on amazon and seems like a good place to start
Edit-fixed the link! 😊
General outline straight cuts using a wet tile saw, then use tile snippers for countouring.
There's a lot of options for drilling the holes.
I think maybe it's this one
I've used these to drill through glass and tile. Take your time and they get the job done. Its only four holes after all.
Bosch GT2000 Glass and Tile Set, 4-Piece https://www.amazon.com/dp/B001GNC8RI/ref=cm_sw_r_udp_awd_v3S2tb0A3PR1RZD3
OK, I think the one I have like this is "carbide". I guess they mean tungsten carbide?
There are special drill bits designed to drill through ceramic. I bought these: https://www.amazon.com/dp/B001GNC8RI/ref=cm_sw_r_cp_api_Ev8FybXJ3YC1D