Reddit mentions of Chemical Guys BUFX_104_HEX5 Hex-Logic Light-Medium Polishing Pad, White (5.5 Inch Pad Made for 5 Inch Backing Plates)

Go to Amazon and order this (I like Meg's products),

• Harbor Freight DA
  
  
• Meg's Endurance Tire Gel
  
  
• Meg's Ultimate Protectant
  
  
• Meg's Ultimate Liquid Wax
  
  
• Meg's APC
  
  
• Rag Company's Borderless Blonde
  
  
• Rag Company's Waffle Weave
  
  
• Hex Logic White Pad (3)
  
  
• Hex Logic Orange Pad (2)
  
  
• Hex Logic Red Pad (2)
  
  
• M105
  
  
• M205
  
  
• 3M Auto Tape
  
  
• Mother's Wheel Brush
  
  
• ABN Woolies
  
  
• Trim Brush
  
  
• Chem Guys Wash Mitt (2)
  
  
• Mother's Clay Bar Kit
  
  This should run you about $345 for everything and have you setup to take care of your car for a long time. You can find a 20% discount code online for harbor freight to bring the price down $55 for the DA. Go to home depot and buy a couple buckets and you will be good to go.
  
  Edit: To add, I went to Lowes and bought a cheap inline sprayer for my hose and it works fine for foaming up the vehicle, plus it only costs $5.
  
  Edit2: If you are going to downvote me please post why you don't like my recommendation.

You can look into these pads instead:

Chemical Guys BUFX_102HEX5 - Hex-Logic Medium-Heavy Cutting Pad, Orange

Chemical Guys BUFX_106HEX5 - Hex-Logic Finishing Pad, Black

Chemical Guys BUFX_104HEX5 - Hex-Logic Light-Medium Polishing Pad, White

Colors are not the same across brands, but these Hex-Logic are the same.

Multiple pads are used when your pad gets full of product or too dirty. You can clean them, but this slows you down and sometimes I feel safer using a newer (fully cleaned) pad. I often use 2 pads for compounding and 2 pads for polishing.

I would buy this DA:
http://www.amazon.com/PORTER-CABLE-7424XP-6-Inch-Variable-Speed-Polisher/dp/B002654I46/ref=sr_1_1?ie=UTF8&qid=1407291588&sr=8-1&keywords=porter+cable+7424+xp

This backing plate:
http://www.amazon.com/Astro-Pneumatic-4607-Velcro-Backing/dp/B003CH3Z8W/ref=pd_bxgy_hi_img_y

3 of these:
http://www.amazon.com/Chemical-Guys-BUFX_102HEX5-Hex-Logic-Medium-Heavy/dp/B0040MI9H0/ref=pd_sim_hi_6?ie=UTF8&refRID=0NJJRSFYV45X3EWAS3NA


2 of these:
http://www.amazon.com/Chemical-Guys-BUFX_104HEX5-Hex-Logic-Light-Medium/dp/B0041MVQ4M/ref=pd_sim_auto_1?ie=UTF8&refRID=11TRQVZC789CNJ8EXED1


1 of these:
http://www.amazon.com/Chemical-Guys-BUFX_106HEX5-Hex-Logic-Finishing/dp/B0042TTIYO/ref=pd_sim_auto_2?ie=UTF8&refRID=08HEKJEWM7H5NRFGAQNH

Pretty sure they are all compatible with the backing plate.

As far as I can tell, that should work. Here's a polishing pad I found for you.
http://www.amazon.com/Chemical-Guys-BUFX_104HEX5-Hex-Logic-Light-Medium/dp/B0041MVQ4M/ref=pd_sim_auto_3?ie=UTF8&refRID=0CANS5K5E2Z6T3P56XXN

I use these when applying the M105:
Chemical Guys BUFX_102_HEX5 Hex-Logic Medium-Heavy Cutting Pad, Orange (5.5 Inch) https://www.amazon.com/dp/B0040MI9H0/ref=cm_sw_r_cp_apap_JnEUTcXh1t2xd


Then I switch to these to apply the M205:
Chemical Guys BUFX_104_HEX5 Hex-Logic Light-Medium Polishing Pad, White (5.5 Inch) https://www.amazon.com/dp/B0041MVQ4M/ref=cm_sw_r_cp_apap_3CuEdXSpOPLHj

To be honest, I can't tell much of a difference before and after using the M205. I can definitely see improvement after using the M105 but yeah, last week I did my front driver's side fender and it took me five hours. Sad face.
Sometimes I think I should have bought a flex as I understand they work faster. I went with the PC because I understood it to be extremely safe. Being my first time and all, I wanted to be safe rather than burn my paint. But yeah, five hours/panel is ridiculous.