Reddit mentions of Hornady 095100 Lock-N-Load Auto-Progressive Reloading Press

Cleaning Supplies/General Maintenance

I'm not going to put links to these, but it is useful to have some cleaning supplies for your press. Rubbing alcohol, paper towels, q-tips, dental picks, etc are nice to have around.

Grease is good to have for your press and some oil is good to put on your dies if you'll be storing them for a long period.



Press



Honestly, I’m a little hesitant to write this part. Presses are the single most costly part of a beginner reloading set up and can change the what else you buy. There is a lot to take into account when buying a press and if you’re a new reloader you can’t fully grasp all of those things yet. You don’t know how you prefer to reload or what might fit you best and choosing the wrong press can make you hate reloading while another press might make you a reloading fiend. Remember, you can generally sell your press for a good chunk of what you paid as long as it is in good shape. Don’t let it rust and you’re fairly safe.


>Single Stage Presses:


Single stage presses are the most basic type of press there is, it holds one die and one shell at a time. This means you’ll end up ‘batch processing’ or doing the same step to say 50 cases at a time before switching dies and running those cases through the next step. For example: Deprime/Resize all 50 cases, switch dies and prime all 50, switch dies and bell all 50, etc. Single stage presses are the slowest way to reload, requiring you to handle the cases multiple times and potentially dial in your die setting every batch. They are also the most stable presses, in that there is very little mechanical variation. This makes them wonderful for precision rifle loading.
Many people recommend you start on a single stage press. Handling your brass many times and getting to see the difference in 50 or 100 cases all at once is a great way to learn what works or not and gives you many chances to spot defects.
Most often I hear people worry about “out growing” their single stage press. Remember, you can sell it or use it as a dedicated depriming station. Many reloaders keep their single stage presses just for rifle loads. Keep in mind that presses that connect on both sides of the case will be stronger than C shaped presses. Compare the Lee and Hornady presses below.


Lee Hand Press $29.09


Lee Press $37.84


Hornady LnL Classic $134.89


>Turret Press:


The turret part of the press is above the brass and holds multiple dies in stations. You place a piece of brass and run it through the first station, then rotate the turret and run it through the next station. You continue this until you have a completed round, then start over with the next piece of brass. This is much faster than a single stage and allows you to do multiple reloading sessions without having to reset all your dies. Because there are more moving parts there is the potential for more variation from round to round. You can still make very accurate ammo on a turret press though, you’re average shooter will never be able to tell the difference between ammo made on a turret or a single stage.
You can still batch process with a turret press and I recommend it for new loaders. Again, getting a feel for reloading and what is/isn’t right is very important.



Turret presses usually have 3-5 stations, keep this in mind when buying as it will change your reloading process.


Lyman T-Mag $186.49


>Progressive Presses:


Progressive presses are cool. They hold 3-5 dies and just as many cases all in the various stages of being reloaded. More importantly, that guy over on arfcom said he can make 600 9mm rounds an hour with his progressive. Even their price tags are impressive. Since you don’t want to outgrow your press you might as well jump in with both feet and get a 5 stage progressive right away. Right?


Well, I’d say that depends. Remember way back up at the top when I asked you those questions? Here is where they really come into play. Progressive presses have a lot of things going on all at once. For instance this is my reloading procedure on my Hornady LnL AP press when loading 9mm. On every raise of the ram I listen for the primer popping out, check a case for a powder charge, watch the case activated powder charge moved into the full upright position, place a bullet, and feel for that bullet seating. When I lower the ram I watch the primer tray to make sure a new primer moves into place facing the right way, feel that it seated properly into the next case, make sure the completed round makes it into the collection bin, and place a new case into the shell plate. All of that happens in a second or two. That is a ton of stuff to watch for without a lot of time to do it. You need to be familiar with what all those things feel/sound like before you can do it quickly. If you can trust yourself to go slowly at first and really really try hard to learn those things while running one case at a time through the press, you can start on a progressive. Even when you feel like you’ve done it enough, I’d hold off a while longer to make sure you really have it down before moving to full on progressive loading. You’ll also need to move your case inspection to before you start the loading process as doing it during progressive loading defeats the speed increase you get from the press.
Remember, reloading is dangerous. Don’t bite off more than you can chew. No one will make fun of you for going with a single stage or turret when starting off. You can always sell and upgrade later and by then you’ll have more knowledge about what you want in a press. If you go spend several hundred dollars on a progressive and then don’t like it’s workflow you’re going to have a lot more invested you’ll need to change to move to a different press. If you are in the market for a progressive you need to determine what features you want. How many stations, auto indexing or manual, how expensive add-ons are, etc. While I don’t claim to be an expert on all presses, everything I’ve heard says you’ll want a Dillon, Hornady, or RCBS progressive. Lee is more of a bargain brand and I’ve never heard good things about their progressive presses. Progressive presses are already finicky creatures to set up, no need to add to that frustration.


Hornady LnL AP $449.99



RCBS Pro2000 569.99

I don’t have a link for a Dillon 650, but they usually run about $560-570 from what I’ve seen. If someone has a link I’ll add it in.
Edit: Dillon 650 $566.95


Review


Reloading is a wonderful hobby that you can spend hours and hours on working up a custom load for the best accuracy or making general plinking ammo. It is a serious hobby however and deserves attention and respect.


At minimum you’ll need the following equipment:



Manuals
Scale
Calipers
Press
Sizing/Decap die
Expanding die(for pistol)
Seating die
Shell plate
Chamfer Tool(needed for rifle)

So this review on Amazon is what my buying guide will consist of. My apologies for formatting, I am on mobile.

-----
I'm new to reloading, but I shoot a lot so instead of doing what every beginner should and buy a single stage press I saved up a little and got the AP press due to the fact I knew I would use it a lot. But after it came I quickly realized it was far more technical than I expected. I found out there were a lot of parts I still needed and a lot more money that still needed to be spent. I was fine with it bet I knew I would have to save up for a little bit to get it all. But after about 100 hours of reloading YouTube videos and four months I was able to actually start reloading. Wishing I had a guide right off the bat to tell me what I need and why I ended up making one for any other new beginner. So here it is.


Disclaimer: Do not follow my advice blindly, do your research on each piece of equipment. The prices I have stated are not set in stone, they were what I spent. I would advise you to shop around to get the best deals
--------------------------------------------------
What you still need:

--Hornady Lock N Load Auto-Progressive Reloading Press
http://www.amazon.com/gp/product/B000PD01NS/ref=oh_details_o01_s00_i00?ie=UTF8&psc=1
$462.64
Notes: Does not have to be this press

--Hornady Lock N Load Ap & Projector Shell Plate
http://www.hornady.com/store/Choose-Shell-Plate-by-Number/
$41.33
Notes: Each shell plate is for a different caliber, when you buy make sure you get the correct plate for the caliber you are reloading. Here is the guide http://www.hornady.com/assets/files/shell_holder.pdf

--Hornady Shell Holder
http://www.hornady.com/store/Choose-Shell-Holder-by-Number/
$5.00
Notes: Each shell holder is for a different caliber, when you buy make sure you get the correct holder for the caliber you are reloading. Although RCBS makes a similar looking holder, it will NOT fit in the Hornady setup. Here is the guide http://www.hornady.com/assets/files/shell_holder.pdf

--Reloading Dies
http://www.amazon.com/gp/product/B000PD6PO2/ref=oh_details_o06_s00_i00?ie=UTF8&psc=1
$43.89
Notes: All reloading dies from all companies are universal to each other's presses. So you don't have to stick to Hornadys dies (I do because I like them)

--Digital Scale
http://www.amazon.com/gp/product/B002BDOHNA/ref=oh_details_o08_s00_i00?ie=UTF8&psc=1
$29.14
Notes: Digital scales are a little more expensive bet worth it for the time you save

--Digital Caliper
http://www.amazon.com/gp/product/B0002JFMIO/ref=oh_details_o09_s00_i00?ie=UTF8&psc=1
$10.60
Notes: Digital calipers are convenient for speed but if money is tight you can go traditional

--Hornady One Shot Gun Cleaner & Dry Lube
http://www.amazon.com/Hornady-Shot-Cleaner-DynaGlide-Aerosol/dp/B000LC9YM2/ref=sr_1_1?s=sporting-goods&ie=UTF8&qid=1375560230&sr=1-1&keywords=hornady+gun+cleaner
$13.28
Notes: Used when you put the press together and clean all the parts

--Hornady One Shot Spray Case Lube
http://www.amazon.com/Hornady-Shot-Spray-DynaGlide-Aerosol/dp/B0001NA29U/ref=sr_1_1?s=sporting-goods&ie=UTF8&qid=1375560743&sr=1-1&keywords=hornady+case+lube
$13.44
Notes: This or any case lube is an absolute need or your rounds will get stuck in the die. This one is cool because you don't have to wipe it off after you deprime and resize so if you have an AP bench like mine you can just keep going.

--Case Trimmer
http://www.amazon.com/Hornady-50140-Camlock-Case-Trimmer/dp/B000PD6QJ6/ref=sr_1_7?s=sporting-goods&ie=UTF8&qid=1375561942&sr=1-7&keywords=case+trimmer
$88.99
Notes: This will trim the case down to size. Needed because after firing the case expands

--Cartridge Reloading Guide
http://www.amazon.com/Hornady-Edition-Handbook-Cartridge-Reloading/dp/B00A95QWGM/ref=sr_1_2?ie=UTF8&qid=1375563579&sr=8-2&keywords=Reloading+guide
$39.80
Notes: Tells you the specifics of each round. There is a different manual for each projectile. So if you use Hornady bullets you will use their guide, RCBS you you'd use theirs, etc.
----------------------------------------------------
What you need to clean the brass:

--Case Tumbler
http://www.amazon.com/Hornady-Case-Tumbler-110-Volt/dp/B000PD1XE4/ref=sr_1_17?s=sporting-goods&ie=UTF8&qid=1375559938&sr=1-17&keywords=media+tumbler
$83.58
Used to remove the carbon from the rounds. I advise not to deprime before use because the media will get stuck in the primer hole.

--Tumbling Media
http://www.amazon.com/Frankford-Arsenal-287178-Brass-Cleaning/dp/B001GX8DS6/ref=sr_1_4?s=sporting-goods&ie=UTF8&qid=1375561385&sr=1-4&keywords=tumbling+media
$20.10
The corn cob media is a little more fine grain and less likely to get stuck

--Metal Polish
http://www.amazon.com/Hornady-9993-Case-Polish/dp/B002L9D8VQ/ref=sr_1_1?s=sporting-goods&ie=UTF8&qid=1375561809&sr=1-1&keywords=hornady+metal+polish
$14.17
You would put this in the tumbler with the rounds to give them a nice polish
--------------------------------------------------------------
What I would recommend:

--Bullet Puller
http://www.amazon.com/gp/product/B001B7ZB4Q/ref=oh_details_o08_s00_i01?ie=UTF8&psc=1
$17.15
Used when you mess up a round, it pulls the projectile out

--Primer Turning Plate
http://www.amazon.com/gp/product/B001OPL80Q/ref=oh_details_o09_s00_i00?ie=UTF8&psc=1
$17.56
used to make sure the primers are set the right way before you put them in the primer tube

--Universal Ammo Reloading Tray
http://www.amazon.com/Hornady-1536-480040-Universal-Loading/dp/B000GU8WU4/ref=sr_1_fkmr2_3?ie=UTF8&qid=1375559333&sr=8-3-fkmr2&keywords=universal+ammo+reloading+tray
$11.38
Used to hold your rounds for inspection, and helps with precision loading powder

--Case Prep Tool
http://www.amazon.com/Lyman-Universal-Case-Prep-Accessory/dp/B0034LAVUG/ref=sr_1_2?s=sporting-goods&ie=UTF8&qid=1375562159&sr=1-2&keywords=case+prep+tool
$55.79
This is used after depriming and trimming to make sure all the holes are clean and free of debris

--Stuck Case Remover
http://www.amazon.com/gp/product/B004Y6ZJQ6/ref=oh_details_o00_s00_i00?ie=UTF8&psc=1
$18.99
Used in case you get a round stuck in the die

--Hornady Micrometer Rifle Lock N Load Powder Measure
http://www.amazon.com/gp/product/B003O1WOJ2/ref=oh_details_o01_s00_i01?ie=UTF8&psc=1
$27.99
Used to better measure out the powder in the Hornady Powder Drop for rifle calibers

--Hornady Micrometer Pistol Lock N Load Powder Measure
http://www.amazon.com/gp/product/B001OPR300/ref=oh_details_o01_s00_i02?ie=UTF8&psc=1
$39.89
Used to better measure out the powder in the Hornady Powder Drop for pistol calibers

--Powder Cop
http://www.amazon.com/gp/product/B003D6ZLXE/ref=oh_details_o00_s00_i00?ie=UTF8&psc=1
$30.57
Used to make sure you don't put more powder in than you should

--Hornady Lock N Load Die Bushing 10 Pack
http://www.amazon.com/Hornady-Lock-Load-Bushing-Pack/dp/B00162OLTW/ref=sr_1_1?ie=UTF8&qid=1375563887&sr=8-1&keywords=Hornady+AP+die+bushing
$42.22
Would recommend if you are reloading multiple calibers, it makes change over much faster.
---------------------------------------------------

What you need for precision loading:

--Hornady Lock N Load Ammo Concentricity Gauge
http://www.amazon.com/gp/product/B001KZ3NNK/ref=oh_details_o07_s00_i00?ie=UTF8&psc=1
$99.99
Only needed for precision reloading

--Powder Funnel
http://www.amazon.com/gp/product/B000PD1XI0/ref=oh_details_o07_s00_i01?ie=UTF8&psc=1
$5.78
Used for more of an exact measurement

--Hornady Microjust Seating Stem
http://www.amazon.com/gp/product/B000GU9VU4/ref=oh_details_o01_s00_i00?ie=UTF8&psc=1
$24.99
Used to get an exact seating depth with the projectile
-----------------------------
I hope this helps! I will be making some tutorial videos soon and will post a link here.

Just went on sale at Amazon https://www.amazon.com/dp/B000PD01NS/

Hornady Lock n Load

http://www.amazon.com/dp/B000PD01NS