#23 in AC adapters
Use arrows to jump to the previous/next product
Reddit mentions of JINHEZO Premium External Power Supply Replacement (Output DC 6V 1A) AC Adapter, for USB Hub and 2.5-Inch HDD Enclosure, for Omron Healthcare Upper Arm Blood Pressure Monitor 5, 7,10 Series
Sentiment score: 3
Reddit mentions: 7
We found 7 Reddit mentions of JINHEZO Premium External Power Supply Replacement (Output DC 6V 1A) AC Adapter, for USB Hub and 2.5-Inch HDD Enclosure, for Omron Healthcare Upper Arm Blood Pressure Monitor 5, 7,10 Series. Here are the top ones.
or
- Three specifications Plug Tip : 3.5mm x 1.35mm, 4.0mm x 1.7mm and 5.5mm x 2.5mm. (Note: Please confirm the DC jack is suitable for your DEVICE before purchase, for avoid error. the product not have led indicator.)
- Highest quality; Cable length: 3.9 feet (1.2 meters); Input Voltage Range: AC 100V-240V AC, Output: DC 6V 1A. Ic chip technology and Certified safe, over voltage protection, Over current protection, short circuit protection. High-quality and security, All products are tested rigorously.
- Compatibility: for Omron 5 Series / 7 Series / 10 Series / 10 Series+ Upper Arm Blood Pressure Monitor and for Omron TENS Unit model PM601ecs, etc.
- Plug Tip: 3.5mm x 1.35mm, 4.0mm x 1.7mm and 5.5mm x 2.1mm.
- Compatibility: 2.5-Inch HDD enclosure, and it works with LED strip lights, USB hub, CCTV cameras, wireless router, HDMI switches, ADSL cats, Audio/video, TV Box etc.
Features:
Specs:
| Color | black |
| Height | 1.1 Inches |
| Length | 47 Inches |
| Number of items | 1 |
| Release date | July 2019 |
| Width | 2.36 Inches |
Get some WD green 4tb drives, they are much faster than those stupid hitachi ones, especially when you put them in raid0. Also that PSU is way overpowered, the 900 series is very power efficient, you should be fine with this one
http://www.amazon.com/Generic-Premium-External-Supply-1000mA/dp/B005ODHJFM/ref=sr_1_1?s=pc&ie=UTF8&qid=1449071148&sr=1-1&keywords=5+volt+power+adapter
I'VE MADE A DISCOVERY
Ok so my power button and other usb ports that shouldn't be powered only light up when a certain is cable is in. It's an active extension. Found here http://www.cablematters.com/pc-512-77-superspeed-usb-30-type-a-male-to-female-active-extension-cable-5-meters164-feet.aspx
Now I use it for my oculus, I thought it wasn't receiving enough power, so I attached this http://www.amazon.com/Premium-External-Power-Supply-1000mA/dp/B005ODHJFM/
Whenever I plug in that cable, my hhd led turns on, and I have to press the power button twice. I hope that didn't do any damage.
Also, I plug that usb cable into my startech adapter, so it seems that the power is travelling through the pcie, and to my usb ports. I think the voltage of that adapter is low, so only certain leds could be powered on it. What do you think? :))))
You're correct, I misread the link.
Those 1/8" jacks are heavily current-limited though meaning the supplied 5v from the connector probably won't be able to serve as VCC. This schematic is actually for the board Sparkfun sells. It's designed to run off a 9v battery but any voltage would work as long as you tweaked the value of R4 to achieve the right collector voltage.
If using this schematic, a regular old power supply might be worth considering.
You need to get an active USB 3.0 cable. It needs to be powered. If you have to long of a USB extension that isn't a powered active cable then you will get very bad performance.
This is what I use. [Cable Matters 3.0 extender](Cable Matters Active USB 3.0... https://www.amazon.com/dp/B00DMFFL2W?ref=yo_pop_ma_swf)
I use it with this [power supply](JINHEZO Premium External Power... https://www.amazon.com/dp/B005ODHJFM?ref=yo_pop_ma_swf)
any 5v power supply. the plug is determined by the voltage. so this one will work.
http://www.amazon.com/Premium-External-Power-Supply-1000mA/dp/B005ODHJFM/ref=sr_1_1?ie=UTF8&qid=1416605471&sr=8-1&keywords=5v+power+supply
Eventually I want to power it through the arduino, but the tutorial recommends it's own power supply. This is what I bought and the jack is too small.