#2,342 in Tools & Home Improvement
Use arrows to jump to the previous/next product
Reddit mentions of Neiko 30252A Water and Oil Separator for Air Line, 1/4" NPT Inlet and Outlet, 90 psi
Sentiment score: 3
Reddit mentions: 4
We found 4 Reddit mentions of Neiko 30252A Water and Oil Separator for Air Line, 1/4" NPT Inlet and Outlet, 90 psi. Here are the top ones.
Buying options
View on Amazon.comor
- WATER SEPARATOR: An essential air tool accessory for mechanics and craftsmen that stops moisture, water, oil, and particles from entering air spray guns and other air compressor tools to keep your equipment in top performing shape.
- OIL SEPARATOR: This air filter unit separates the oil from the air as it goes through your air hose the oil needs to stay inside the compressor to keep it lubricated while the compressed air needs to exit the compressor free of oil to ensure maximum air output to your air tools and increase reliability and lifespan.
- MAXIMIZE PERFORMANCE: The inline oil water separator traps water vapor and dust to maximize the performance of air compressor tools for cleaner and more even jobs providing excellence in execution and saving you countless dollars in replacing expensive air tool equipment.
- TRANSPARENT DESIGN: This air compressor in line dryer has a clear build that allows you to monitor the buildup and the amount of water and dust particles that this filter has trapped. Quick release valve conveniently located to removed anything trapped inside.
- SPECIFICATIONS: Each in line air compressor moisture filter comes with a 1/4” NPT inlet and outlet for any standard air hose with a quarter inch fitting and can handle pressure to 90 pounds per square inch. Durable aluminum housing construction with brass fittings.
Features:
Specs:
Height | 2 Inches |
Length | 6.8 Inches |
Number of items | 1 |
Size | 90 PSI |
Weight | 0.22 Pounds |
Width | 5.1 Inches |
I bought everything to do it at home because it was cheaper than having a few rifles done by other people. And I like learning new things and doing it myself.
$120 Benchtop Blast Cabinet
$45 50lbs Aluminium Oxide blast media
$40 Dewalt Touch-up Spray gun
$8 Oil/Water Separator
$18 3M Respirator
$8 Powder Free gloves
$14 5ml Glass syringe for easily measuring small amounts of H-Series catalyst. Not necessary but nice. (Grainger.com)
$20 Gallon of Acetone (hardware store)
$30 for misc hoses/fittings
$$$ Container for soaking parts in acetone. I use a 50cal ammo can for almost everything
$$$ Oven for curing if using H-series. I use an old large toaster oven.
$$$ Air compressor with regulator (I already had this)
$$$ Cerakote (plus mesh strainer, graduated cylinder, tape, etc)
​
$300 not including the compressor, Cerakote or oven.
​
Definitely buy extra Cerakote to practice with and learn how to adjust the spray gun. I practiced on some old tools and a rusty vise that I had. I now have a Stormtrooper White vise on my workbench.
​
You really should have an inline filter on your air line.
https://www.amazon.com/gp/product/B002GQ3SUA/ref=s9_acsd_topr_hd_bw_b3jQpjX_c_x_w?pf_rd_m=ATVPDKIKX0DER&pf_rd_s=merchandised-search-4&pf_rd_r=QZVN29F2X7P526SCZ3TT&pf_rd_t=101&pf_rd_p=dc68059f-0cd4-554c-860c-419946e51f9b&pf_rd_i=3419729011
Talk with your local paint supplier on that particular brand's processes - but you will likely want/need to reprime it so it is sure to stick (and the primer you want to be compatible with the paint you use). I know the primer I used, you wanted to lay paint on it within 48 hours or so for best adhesion.
It takes some practice to get the amount of paint correct, as well as dialing in the gun (watch some Youtube videos). There is a somewhat fine line between putting the final coat on too light and it showing up dry, or all of a sudden you put too much on and you have a run. Don't forget to clean the gun thoroughly after each use.
Final advice? Don't sweat the imperfections, it's a track bike and we aren't pro racers. Also accept that your first full paint job or at least the first couple pieces you do will probably not look great as you learn how to setup the gun and control how much paint to lay down.
Just pin the fan with something to keep it from spinning. Put a pen through it. As for the compressor itself you need to be careful with that. Compressors tend to condense moisture in the tanks. I keep mine stored with the drain valve open so anything that condenses in is during times it's not in use drains out. Even that isn't a sure thing though so before I even considered using it for a purpose like this I installed an oil/water separating filter in line to make sure any leftover moisture got filtered out. They are not expensive and a good thing to have as they protect your air tools from corrosion as well. A desiccant dryer works even better, but is a lot more expensive. Here is what I have on mine. https://www.amazon.com/Neiko-30252A-Water-Separator-Outlet/dp/B002GQ3SUA/ref=pd_sim_469_2?_encoding=UTF8&psc=1&refRID=R9QATQYGZXACBZ21C5J9