#9 in Security & surveillance accessories
Use arrows to jump to the previous/next product
Reddit mentions of SIM&NAT Male DC 2.1mm x 5.5mm Wire Power Pigtails Adapter Barrel Plug Socket Cables for CCTV Security Camera, DVR, Car Rearview Monitor System Video, LED Strip Light, Surveillance (20 inch / 50 cm)
Sentiment score: 3
Reddit mentions: 4
We found 4 Reddit mentions of SIM&NAT Male DC 2.1mm x 5.5mm Wire Power Pigtails Adapter Barrel Plug Socket Cables for CCTV Security Camera, DVR, Car Rearview Monitor System Video, LED Strip Light, Surveillance (20 inch / 50 cm). Here are the top ones.
or
SIM&NAT Barrel power plug along with 20 inch length black and red wires, long enough to finish most of project, also can be cut according to your need. Dc male power pigtail wire is easy to maneuver and install, and also helps to conserve space.Most dome- or bullet-style surveillance cameras come with a short power cable but need a patch cable to connect to a power supply.SIM&NAT 12v pigtail dc connector is a perfect usage for connecting dc cctv pigtails to your power distribution system. With two high quality stripped tinned bare wires, there is no need to worry about it's quality and durability.2.1 mm dc barrel plug cord is designed for CCD Camera or Wireless camera. You may connect extra Battery pack with 12v male dc pigtail power connector or for CCD Camera installation.Connect your camera to the power supply easily with cctv power pigtail, which has 1.67 feet of red and black color-coded wires along with a standard center-positive plug to connect easily to your camera.
Specs:
| Color | 10 Male DC Pigtail Wire( 20inch/50cm ) |
| Height | 0.5 Inches |
| Length | 5.7 Inches |
| Weight | 0.03086471668 Pounds |
| Width | 3.3 Inches |
SIM&NAT Male DC 2.1mm x 5.5mm Wire Power Pigtails Adapter Barrel Plug Socket Cables for CCTV Security Camera, DVR, Car Rearview Monitor System Video, LED Strip Light, Surveillance (20 inch / 50 cm) https://www.amazon.com/dp/B01GPL8MVG/ref=cm_sw_r_cp_apa_eeHMzbZ5K8BHP I would use a kit like these and a terminal block to break out the 5v lines. After that just make sure you get the red lines to positive and you should be good to go!
I am new to fish finders, but I have the garmin in my kayak and like it so far. This is how I mounted it, and links to the power pack and accessories I used. There are larger power banks but the 6000mah, was perfect for my needs.
https://imgur.com/a/TeAAv5y
Battery
https://www.amazon.com/gp/product/B00MF70BPU/ref=ppx_yo_dt_b_asin_title_o07_s00?ie=UTF8&psc=1
Fuse (I cut the original one off and soldered in the blade sytle)
https://www.amazon.com/gp/product/B06XK4RNB3/ref=ppx_yo_dt_b_asin_title_o05_s00?ie=UTF8&psc=1
Cable gland set I used for the pelican box
https://www.amazon.com/gp/product/B077R1RT2T/ref=ppx_yo_dt_b_asin_title_o05_s00?ie=UTF8&psc=1
5.5mm plugs to soldered to the garmin cable to plug directly into the battery pack.
https://www.amazon.com/gp/product/B01GPL8MVG/ref=ppx_yo_dt_b_asin_title_o07_s00?ie=UTF8&psc=1
Pelican Case
https://www.amazon.com/gp/product/B001LZ5HDI/ref=ppx_yo_dt_b_asin_title_o06_s00?ie=UTF8&psc=1
The light strip comes with a bare-wire end and a barrel-connector end. I've never seen a Molex-to-barrel-connector adapter though.
There are a few different ways to use a strip like this in a PC. I always solder a Molex connector onto the bare-wire end, so that's one option. If you want to go that route remember that on Molex, the YELLOW wire is 12V, not the red one.
You could also wire one of these to your Molex and plug it into the other end. Soldering would also be needed there though.
If soldering's isn't your thing I could easily make one for you.
[This will give you plenty of chances to get it right. ](http://www.SIM.com/&NAT Male DC 2.1mm x 5.5mm Wire Power Pigtails Adapter Barrel Plug Socket Cables for CCTV Security Camera, DVR, Car Rearview Monitor System Video, LED Strip Light, Surveillance (20 inch / 50 cm) https://www.amazon.com/dp/B01GPL8MVG/ref=cm_sw_r_cp_apa_uNlNAb6SQM973)