Reddit mentions of Stanley 10-049 Pocket Knife with Rotating Blade

I recommend going slow with hand tools. Buy them one or two at a time, and then learn to use, sharpen, and care for those before buying more. This will help you get the best stuff for you while spending as little as possible. Let your projects guide your tool purchases.

Amazon isn't a great place to buy hand tools. Most people shop at either Lee Valley, Lie-Nielsen, or eBay for planes, chisels, saws, rasps, etc. That said, there's a surprising amount of stuff you'll need that's not the tools themselves. Personally, I wouldn't want to saddle myself with an inferior tool just to use a gift certificate.

Anyways. Stuff you SHOULD buy on amazon:

Hand Tools

• A card scraper. Do your research--they're tricky to sharpen, but they're miraculous things. I like this one: http://www.amazon.com/Bahco-5-Inch-474-125-0-80-Cabinet-Scraper/dp/B0001P0PHW/ref=sr_1_cc_1?s=aps&ie=UTF8&qid=1407859293&sr=1-1-catcorr&keywords=bahco+card+scraper
  
• Baby's first hand saw: http://www.amazon.com/Tajima-Japan-JPR-SET-Rapid-Blades/dp/B0008KLNSA/ref=sr_1_3?s=hi&ie=UTF8&qid=1407859464&sr=1-3&keywords=dozuki
  
  Clamps
  
  
• Amazon is a decent place to buy clamps unless you're into the HD/Lowe's arbitrage thing. There's good advice on what clamps you need here: http://www.thewoodwhisperer.com/videos/the-big-squeeze/
  
  Measuring/Marking
  
  
• A solid combination square like this one: http://www.amazon.com/Starrett-11H-12-4R-Combination-Square-Wrinkle/dp/B0002CSBNO/ref=sr_1_2?ie=UTF8&qid=1407857853&sr=8-2&keywords=starret
  
• An inexpensive marking knife: http://www.amazon.com/gp/product/B00002X201/ref=oh_aui_detailpage_o07_s00?ie=UTF8&psc=1
  
• Your first festool: http://www.amazon.com/gp/product/B002UKRNG2/ref=oh_aui_detailpage_o05_s00?ie=UTF8&psc=1
  
• I have some crown marking gauges from Amazon, but the jury's still out. I think I'm going to end up deciding that they're junk. They are cheap and will get you going, though.
  
  Sharpening Gear
  
  
• You can easily spend way more than $300 on a sharpening setup. Do your research. Most of the stuff you'll need can be found at Amazon.
  
• A good starting point sharpening stone: http://www.amazon.com/King-47506-1000-Combination-Waterstone/dp/B001DT1X9O/ref=sr_1_1?ie=UTF8&qid=1407858723&sr=8-1&keywords=king+stone
  
• Training Wheels: http://www.amazon.com/Robert-Larson-800-1800-Honing-Guide/dp/B000CFNCKS/ref=sr_1_1?ie=UTF8&qid=1407858827&sr=8-1&keywords=honing+guide
  
  Consumables
  
  
• Wood glue--TiteBond II is what "everyone" uses. TiteBond III is more waterproof and gives you a longer open time
  
• Sandpaper
  
• Mineral spirits
  
• Finishing supplies
  
  Safety Gear
  
  
• The best splinter removal tweezers: http://www.amazon.com/gp/product/B000EMYHA8/ref=oh_aui_detailpage_o02_s01?ie=UTF8&psc=1
  
• Band aids: http://www.amazon.com/Band-Aid-Brand-Adhesive-Bandages-Comfort/dp/B0047ITQ42/ref=sr_1_5?s=hpc&srs=2582875011&ie=UTF8&qid=1407859147&sr=1-5&keywords=band+aid+sheer+strips
  
• Safety Glasses, Hearing protection (if you plan to use power tools), Respirator (if you plan to make dust), etc.
  
• Broom, dustpan, brush.
  

This guys list is pretty much what I was going to say.

So for some recommendations:

I've restored an antique 1930s No 5. Bought it for 45, and it is best for those on a budget. Any pre WWII Stanley just needs some light restoration work and a reworking of the blade and it will do 20x better than a harbor freight plane and roughly same as modern Stanley sweethearts at 1/3 the cost. It may not be as good as woodriver or lie Nielsen, but it's a 1/4 or 1/6 the cost respectively.

Paul sellers recommends Aldi Chisels, I got Narex instead for an additional $20. I love them, and will only upgrade out of them once I get enough money to go for some veritas or lie Nielsen. I got a set of 4 with imperial measurements for $60ish. I'd put any extra money into sharpening systems than upgrading them.

I bought David Barron dovetail guides and the Japanese pull saws he reccomends. Gyokucho 372 Razor Saw Dotsuki Takebiki Saw. Look at Amazon for the narex chisels I reccomend and the 'people who bought this also bought' section and you'll find it easily. While there you can find some leather for stropping and the green compound you need with it. Also while looking at these, you'll see a reccomendations for the Stanley disposable knife and the replacement blades. This is what Paul sellers recommends, and it works well. Stays ridiculously sharp, and can be rehoned with little effort and the blade cheaply replaced once it becomes to much work top get the thing sharp. Cutting layout lines is much more precise and helps prevent tearout. I bought narex marking knife and love it. I don't mind trying to hone it every so often. Ditto the scratch awl.

Basically took around the Amazon other bought recommendations and you'll find a bunch of fairly cheap quality things to get you up and running.

You can make a huge variety of joints with just a few tools. This is close to what my toolset looked like when I cut my first dovetails.

Note: None of these are affiliate links. I don't get paid if you buy these.

$28 Dozuki "Z" saw
I prefer western style saws (like the Veritas saw /u/jbaird recommended), but you will be able to cut very nice joints with this:
https://www.amazon.com/Z-saw-07029-Dozuki-Z-Saw/dp/B001DSY7G6/ref=sr_1_2?ie=UTF8&qid=1495827959&sr=8-2&keywords=japanese+saw+dovetail

$14 Empire combination square
https://www.amazon.com/Empire-Level-E280-Professional-Combination/dp/B000EU0ZB0/ref=sr_1_4?ie=UTF8&qid=1495828208&sr=8-4&keywords=combination+square

$10 pocket knife for laying down lines:
https://www.amazon.com/Stanley-10-049-Pocket-Knife-Rotating/dp/B00002X201/ref=sr_1_2?ie=UTF8&qid=1495828775&sr=8-2&keywords=stanley+knife

$24 marking gauge:
https://www.amazon.com/Crown-152M-Miniature-Rosewood-Mortice/dp/B001V9KOSM/ref=sr_1_1?ie=UTF8&qid=1495828829&sr=8-1&keywords=rosewood+gauge

$35 chisel:
https://www.amazon.com/gp/product/B004SG70L4/ref=oh_aui_search_detailpage?ie=UTF8&psc=1


You could also get:

$49 DMT coarse sharpening stone. Only sharpening stone you need. Get a strop eventually.
https://www.amazon.com/gp/product/B0001WP1L0/ref=oh_aui_search_detailpage?ie=UTF8&psc=1

$5 Stanley Coping saw. Will help you remove dovetail waste.
https://www.amazon.com/Stanley-15-106-8-Inch-Length-4-Inch/dp/B00009OYG2/ref=sr_1_1?ie=UTF8&qid=1495829310&sr=8-1&keywords=coping+saw

Provided you're gonna buy lumber that's already prepped, you should be good to go with the above. I'd suggest building things rather than 'practicing joinery'. You'll get plenty of joinery practice along the way :)

Stanley 10-049 work knife i've always liked that i could sharpen the blade a few times before you give up and replace it. I have had the same few handles for decades.

This Stanley or because I'm left-handed this bad boy which also comes in a right hand variant.

I'm no pro, but here's my suggstion.

Marking and measuring are important. Get a knife of some sort. This marking knife is cheap and well regarded. Get a combination square (lot available at all sorts of price points). For a longer straight edge, you can use extruded aluminum or angle aluminum which is cheap, lightweight, and straight enough. Then learn to create a knife edge and a handsaw (either western push style, or japanese pull style) and you can cut wood accurately to size.

You're planes will then get you to flatten and surface your boards (you can use the aluminum as winding sticks). Lots of resources available for rehabbing planes. Then the next step is joints. For this, chisels and a comfortable mallet are great (and a rabbet plane if you can find/afford one). To make life easier, a coping saw and a drill (electric or brace and bit) can clear out waste for you. It makes life easier. But the key here is keeping your planes and chisels sharp. I don't know of a budget way to do this. I've got a few Ezelap diamond stones (coarse, fine and extra fine) that I use, but there are other methods as well (sandpaper on glass, waterstones, oil stones, tormeks). But sharpening is critical to handtool woodworking happiness. You might want a sharpening guide as well. The cheap ones work great (I'm not sure why these are so expensive. I think I paid $8 for mine). Then build one of these and you're all set for sharpening. Finally, you need stuff to stick together, so glue and glue applicators are worth looking into. I also use my cabinet scrapers quite a bit, but that's just me. They're cheap so I think everyone should have one.

After that, you can spend all sorts of money on other stuff as you progress. But most anything square can be built with this setup.

Lastly, you'll need to think about measuring and marking. Your work is only as good as the accuracy you can maintain. You'll need:

-Combination square

-Marking knife - I use the one recommended by Paul Sellers https://www.amazon.ca/STANLEY-10-049-Pocket-Knife-Rotating/dp/B00002X201?psc=1&SubscriptionId=AKIAILSHYYTFIVPWUY6Q&tag=duc12-20&linkCode=xm2&camp=2025&creative=165953&creativeASIN=B00002X201#

-Marking gauge/mortice guage

-Bevel guage - not essential, but nice to have

I carry a Stanley folding utility knife It's a good mix of pocket-knife size with swappable utility knife blades. If you need something for more than just collecting pocket lint and opening Amazon packages, but don't quite need to carry a full-size utility, this thing is awesome (and way sharper than any utility I've seen).

Definitely buy tools based on the project(s) you have to do, but I think a good start would include:

Hand planer (Vintage Stanley Bailey is ideal)

A few chisels (Narex are a good option if you're on a budget)

Combination Square

Marking Knife (Stanley makes one that Paul Sellers recommends: Amazon)

Marking/Mortising Gauge(s): I think Crown is the only company making reliable ones with pins vs. the more common cutting disc.

Saw: I got this to start, its sharp as all heck, and has a crosscut and rip edge Japanese Ryoba

A marking knife always comes in handy: https://www.amazon.com/Stanley-10-049-Pocket-Knife-Rotating/dp/B00002X201

Couldn't quite get under 5, but these are pretty close. This one is 5.98 with shipping.

There's also [this one] (http://www.amazon.com/Stanley-10-049-Pocket-Knife-Rotating/dp/B00002X201/ref=sr_1_6?s=sporting-goods&ie=UTF8&qid=1394335787&sr=1-6&keywords=pocket+knife) for 6.41, and it has some really good reviews.

This IS under five with shipping, but it's not exactly what you're asking for.